Bobcat 751 Skid Steer Loader Operation & Maintenance Manual
118 pages · Publication 6900967
Added to your cart. View cart
- Models
- 751
- Serial coverage
- S/N 515730001 & Above
- S/N 515620001 & Above
- Manual type
- Operation & Maintenance Manual
- Pages
- 118
- Publication
- 6900967
- Condition
- Brand new
What's inside
From the manual's own table of contents: 12 sections, 156 entries. See sample pages (PDF, 372 KB)
FOREWORD6 topics
- SERIAL NUMBER LOCATIONS
- LOADER SERIAL NUMBER
- ENGINE SERIAL NUMBER
- DELIVERY REPORT
- BOBCAT LOADER IDENTIFICATION
- FEATURES AND ACCESSORIES
SAFETY6 topics
- SAFETY INSTRUCTIONS FOR BOBCAT SKID–STEER LOADERS AND ATTACHMENTS
- SAFETY IS THE OPERATOR’S RESPONSIBILITY
- BEFORE OPERATING THE BOBCAT LOADER
- SAFE OPERATION NEEDS A QUALIFIED OPERATOR *
- FIRE PREVENTION
- MACHINE SIGNS (DECALS)
OPERATING INSTRUCTIONS48 topics
- INSTRUMENT PANEL IDENTIFICATION
- Left Panel – Standard and Deluxe Instrument Panels
- Right Panel – Standard Instrument Panel (With Key Switch)
- Right Panel – Deluxe Instrument Panel (With Keyless Start)
- Option and Field Accessory Panels (If Equipped)
- LIFT ARM BY–PASS CONTROL
- TRACTION LOCK OVERRIDE
- ENGINE SPEED CONTROL
- PARKING BRAKE
- STEERING LEVERS
- STOPPING THE BOBCAT LOADER
- SEAT BAR RESTRAINT SYSTEM
- HYDRAULIC CONTROLS
- Foot Pedals
- Advanced Hand Controls (If Equipped)
- Quick Couplers
- Releasing Hydraulic Pressure (Loader andAttachment)
- Attachment Auxiliary Hydraulics (If Equipped)
- Attachment Control Device (ACD) (If Equipped)
- Bucket Position Valve Operation (If Equipped)
- DAILY INSPECTION
- Daily Inspection and Maintenance
- PRE–STARTING PROCEDURE
- STARTING THE ENGINE
- Standard Instrument Panel (With Key Switch)
- Deluxe Instrument Panel (With Keyless Start)
- Cold Temperature Starting
- Warming the Hydraulic/Hydrostatic System
- STOPPING THE ENGINE
- MONITORING THE DISPLAY PANEL
- ATTACHMENTS AND BUCKETS
- Bob–Tach
- OPERATING PROCEDURE
- Filling the Bucket (Foot Pedals)
- Filling the Bucket (Advanced Hand Controls)
- Emptying the Bucket (Foot Pedals)
- Emptying the Bucket (Hand Controls)
- Leveling the Ground (Using Lift Arms in Float Position) (Foot Pedals)
- Leveling the Ground (Using Lift Arms in Float Position) (Advanced Hand Controls)
- Digging Into the Ground (Foot Pedals)
- Digging Into the Ground (Advanced Hand Controls)
- Backfilling (Foot Pedals)
- Backfilling (Advanced Hand Controls)
- PARKING THE BOBCAT LOADER
- TRANSPORTING THE BOBCAT LOADER
- TOWING THE LOADER
- LIFTING THE LOADER
- Single Point Lift
PREVENTIVE MAINTENANCE70 topics
- MAINTENANCE SAFETY
- SERVICE SCHEDULE
- LIFT ARM SUPPORT DEVICE
- Engaging The Lift Arm Support Device
- Disengaging The Lift Arm Support Device
- HEATER
- Filter Cleaning and Maintenance
- OPERATOR CAB
- Raising The Operator Cab
- Lowering The Operator Cab
- Emergency Exit
- SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS)
- Inspecting the Seat Bar
- Maintaining the Seat Bar
- SEAT BAR RESTRAINT SYSTEM (ADVANCED HAND CONTROLS)
- Inspecting the Seat Bar
- Maintaining the Seat Bar
- BOBCAT INTERLOCK CONTROL SYSTEM (BICS™)
- Inspecting The BICS™ Controller
- Inspecting Deactivation Of The Auxiliary Hydraulics System (Engine STOPPED – Key ON)
- Inspecting The Seat Bar Sensor (Engine RUNNING)
- Inspecting The Traction Lock (Engine RUNNING)
- Inspecting The Lift Arm By–Pass Control
- Additional Inspection For Loaders With Advanced Hand Controls (AHC)
- REAR DOOR
- Opening And Closing The Rear Door
- Adjusting The Rear Door
- REAR GRILL
- AIR CLEANER SERVICE
- Replacing Filter Element
- FUEL SYSTEM
- Fuel Specifications
- Filling The Fuel Tank
- Fuel Filter
- Removing Air From The Fuel System
- ENGINE LUBRICATION SYSTEM
- Checking Engine Oil
- Replacing Oil And Filter
- ENGINE COOLING SYSTEM
- Cleaning The Cooling System
- Replacing The Coolant
- ALTERNATOR BELT
- Adjusting
- ELECTRICAL SYSTEM
- Description
- Cleaning Battery Terminals
- Fuse Location
- Using A Booster Battery (Jump Starting)
- Removing And Installing The Battery
- HYDRAULIC/HYDROSTATIC SYSTEM
- Checking And Adding Fluid
- Replacing Hydraulic Fluid and Case Dain Filters
- Breather Cap
- SPARK ARRESTOR MUFFLER
- TIRE MAINTENANCE
- Wheel Nuts
- Rotating
- Mounting
- FINAL DRIVE TRANSMISSION (CHAINCASE)
- Checking And Adding Oil
- Removing Oil From The Chaincase
- FAN GEARBOX
- Checking And Maintaining
- DRIVE BELT
- Adjusting The Drive Belt
- Replacing The Drive Belt
- LUBRICATION OF THE BOBCAT LOADER
- PIVOT PINS
- BOB–TACH
- Inspection and Maintenance
SYSTEM SETUP AND ANALYSIS3 topics
- Troubleshooting Chart
- DELUXE INSTRUMENTATION SERVICE CODES
- Deluxe Instrumentation Panel Setup
MACHINE SIGN TRANSLATIONS1 topic
- SERVICE SCHEDULE - 6718398
SPECIFICATIONS10 topics
- SKID STEER LOADER SPECIFICATIONS
- Dimensional Specifications
- Performance Specifications
- Engine
- Loader Controls
- Hydraulic System
- Electrical System
- Capacities
- BOBCAT APPROVED ATTACHMENTS & ACCESSORIES
- ADDITIONAL PUBLICATIONS AND TRAINING MATERIALS
Inside this manual
Real pages from this operation & maintenance manual (118 pages). Open the sample pages (PDF, 371 KB)
- Controls and operation, page 31: Keep both feet on pedals or footrests while
- Specifications, page 44: Excessive load can cause tipping or loss of
- Maintenance, page 75: ENGINE LUBRICATION SYSTEM (Cont’d)
- Color page, page 16: Operation & Maintenance Manual
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the 751 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 118 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).