Bobcat 864, 864 High Flow Skid Steer Loader Operation & Maintenance Manual
120 pages · Publication 6900626
Added to your cart. View cart
- Models
- 864, 864 High Flow
- Serial coverage
- 516911001 & Above
- Manual type
- Operation & Maintenance Manual
- Pages
- 120
- Publication
- 6900626
- Condition
- Brand new
What's inside
From the manual's own table of contents: 12 sections, 156 entries. See sample pages (PDF, 330 KB)
FOREWORD6 topics
- SERIAL NUMBER LOCATIONS
- LOADER SERIAL NUMBER
- ENGINE SERIAL NUMBER
- DELIVERY REPORT
- BOBCAT LOADER IDENTIFICATION
- OPTIONS AND ACCESSORIES
SAFETY6 topics
- SAFETY INSTRUCTIONS FOR BOBCAT SKID–STEER LOADERS AND ATTACHMENTS
- SAFETY IS THE OPERATOR’S RESPONSIBILITY
- BEFORE OPERATING THE BOBCAT LOADER
- SAFE OPERATION NEEDS A QUALIFIED OPERATOR *
- FIRE PREVENTION
- MACHINE SIGNS (DECALS)
OPERATING INSTRUCTIONS50 topics
- INSTRUMENT PANEL
- Without BOSS® (Front Panel)
- Without BOSS (Side Console*)
- With BOSS® (Front Panel)
- With BOSS (Side Console*)
- BOSS® OPTION PANEL
- BOBCAT INTERLOCK CONTROL SYSTEM (BICS™)
- Lift Arm By–Pass Control
- Traction Lock Override
- Auxiliary Hydraulic System (If Equipped)
- TRACTION LOCK CONTROL SYSTEM
- ENGINE SPEED CONTROL
- PARKING BRAKE
- STEERING LEVERS
- STOPPING THE BOBCAT LOADER
- SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS)
- SEAT BAR RESTRAINT SYSTEM (ADVANCED HAND CONTROLS)
- HYDRAULIC CONTROLS
- Foot Pedals
- Advanced Hand Controls
- Auxiliary Hydraulics
- DAILY INSPECTION
- Daily Inspection and Maintenance
- PRE–STARTING PROCEDURE
- STARTING THE ENGINE (Without BOSS®)
- STOPPING THE ENGINE
- STARTING THE ENGINE (With BOSS™)
- ATTACHMENTS AND BUCKETS
- Installing The Bucket Or Attachment
- Removing The Bucket Or Attachment
- OPERATING PROCEDURE
- COMPACT TRACK LOADER OPERATING TIPS
- OPERATING PROCEDURE (FOOT PEDALS)
- Filling The Bucket
- Emptying The Bucket
- Digging Into The Ground
- Leveling The Ground (Using Lift Arms In Float Position)
- Backfilling
- PARKING THE BOBCAT LOADER
- OPERATING PROCEDURE (HAND CONTROLS)
- Filling The Bucket
- Emptying The Bucket
- Digging Into The Ground
- Leveling The Ground (Using Lift Arms In Float Position)
- Backfilling
- TRANSPORTING THE BOBCAT LOADER
- TOWING THE LOADER
- LIFTING THE LOADER
- Four Point Lift
- Single Point Lift
PREVENTIVE MAINTENANCE66 topics
- MAINTENANCE SAFETY
- SERVICE SCHEDULE
- OPERATOR CAB
- Raising The Operator Cab
- Lowering the Operator Cab
- Emergency Exit
- Inspecting The Seat Bar
- Maintaining The Seat Bar
- Inspecting The Seat Bar
- Maintaining The Seat Bar
- Inspecting The BICS™ Controller (Engine STOPPED– Key ON)
- Deactivation Of The Auxiliary Hydraulics System (Engine STOPPED – Key ON)
- Inspecting The Seat Bar Sensor (Engine RUNNING)
- Inspecting The Traction Lock (Engine RUNNING)
- Inspecting The Lift Arm By–Pass Control
- Additional Inspection For Loaders With Advanced Hand Controls
- Inspecting The Traction Lock Control System
- Maintenance
- PIVOT PINS
- TRACK TENSION
- Adjusting
- LIFT ARM SUPPORT DEVICE
- Engaging The Lift Arm Support Device
- Disengaging The Lift Arm Support Device
- BOB–TACH
- Inspection And Maintenance
- REAR DOOR
- Adjusting the Rear Door
- REAR GRILL
- AIR CLEANER SERVICE
- FUEL SYSTEM
- Fuel Specifications
- Filling The Fuel Tank
- Fuel Filter
- Removing Air From The Fuel System
- Removing Fuel From The Fuel Tank
- ENGINE LUBRICATION
- Checking
- Oil Chart
- Replacing The Oil And Filter
- ENGINE COOLING SYSTEM
- Cleaning The Cooling System
- ALTERNATOR BELT
- Adjusting The Alternator Belt
- TIMING BELT
- DRIVE BELT
- Adjusting The Drive Belt
- Replacing The Drive Belt
- ELECTRICAL SYSTEM
- Description
- Servicing The Electrical System
- Fuse Location
- Using A Booster Battery (Jump Starting)
- Removing And Installing The Battery
- FAN GEARBOX
- Checking And Maintaining
- HYDRAULIC/HYDROSTATIC SYSTEM
- Checking And Adding Fluid
- Replacing the Hydraulic/Hydrostatic Filter
- Replacing The Hydraulic Fluid
- Hydraulic Reservoir Breather Cap
- HYDROSTATIC MOTOR CARRIER OIL
- Removing And Replacing Oil
- TRACK ROLLER AND IDLER LUBRICATION
- Removing And Replacing Oil
- LUBRICATION OF THE BOBCAT LOADER
SYSTEMS ANALYSIS5 topics
- SERVICE CODES
- AUXILIARY HYDRAULICS OPERATION
- Troubleshooting Chart
- ADVANCED HAND CONTROLS (AHC)
- Troubleshooting Chart
MACHINE SIGN TRANSLATIONS1 topic
- SERVICE SCHEDULE -6715563
SPECIFICATIONS10 topics
- 864/864H COMPACT TRACK LOADER SPECIFICATIONS
- Performance Specifications
- Engine
- Loader Controls
- Drive System
- Hydraulic System
- Electrical System
- Capacities
- BOBCAT COMPANY APPROVED ATTACHMENTS & ACCESSORIES
- ADDITIONAL PUBLICATIONS AND TRAINING MATERIALS
Inside this manual
Real pages from this operation & maintenance manual (120 pages). Open the sample pages (PDF, 329 KB)
- Controls and operation, page 35: With BOSS
- Maintenance, page 82: ENGINE LUBRICATION (Cont’d)
- Specifications, page 113: SPECIFICATIONS
- Color page, page 16: 864, 864H Bobcat Loader
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 120 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).