Bobcat A300 Turbo, A300 Turbo High Flow All-Wheel Steer Loader Operation & Maintenance Manual
134 pages · Publication 6902431
Added to your cart. View cart
- Models
- A300 Turbo, A300 Turbo High Flow
- Serial coverage
- 523411001 & Above
- 523511001 & Above
- Manual type
- Operation & Maintenance Manual
- Pages
- 134
- Publication
- 6902431
- Condition
- Brand new
What's inside
From the manual's own table of contents: 9 sections, 211 entries. See sample pages (PDF, 381 KB)
FOREWORD11 topics
- BOBCAT COMPANY IS ISO 9001 CERTIFIED
- REGULAR MAINTENANCE ITEMS
- MOTOR OIL
- SERIAL NUMBER LOCATIONS
- Loader Serial Number
- Engine Serial Number
- DELIVERY REPORT
- MACHINE IDENTIFICATION
- FEATURES AND ACCESSORIES
- Standard Items
- Options and Accessories
SAFETY6 topics
- SAFETY INSTRUCTIONS
- Before Operation
- Safe Operation Is The Operator’s Responsibility
- Safe Operation Needs A Qualified Operator
- Fire Prevention
- MACHINE SIGNS (DECALS)
OPERATING INSTRUCTIONS81 topics
- INSTRUMENT PANEL IDENTIFICATION
- Left Panel
- Right Panel (Standard - With Key Switch)
- Right Panel (Deluxe - With Keyless Start)
- Option And Field Accessory Panels (If Equipped)
- Cab Light
- LIFT ARM BY-PASS CONTROL
- Operation
- TRACTION LOCK OVERRIDE
- Operation
- ENGINE SPEED CONTROL
- Operation
- TWO-SPEED CONTROL
- INCHING CONTROL
- Operation
- PARKING BRAKE
- Operation
- STEERING MODE SELECTION
- STEERING LEVER (LEFT JOYSTICK)
- Skid Steer Mode
- STOPPING THE LOADER (SKID STEER MODE)
- All Wheel Steer Mode
- STOPPING THE LOADER (ALL WHEEL STEER MODE)
- SEAT BAR RESTRAINT SYSTEM
- Operation
- HYDRAULIC CONTROLS
- Operation
- Lift Arm Operation (Right Joystick)
- Lift Arm Float Position (Right Joystick)
- Tilt Operation (Right Joystick)
- Front Auxiliary Hydraulics (Right Joystick)
- Rear Auxiliary Hydraulics (Left Joystick) (Option)
- Quick Couplers
- Releasing Hydraulic Pressure (Loader and Attachment)
- Auxiliary Hydraulics Button - VARIABLE FLOW
- Auxiliary Hydraulics Button - MAXIMUM FLOW ONLY
- Auxiliary Hydraulics Button - DISENGAGE
- FRONT Auxiliary Hydraulics Operation - VARIABLE FLOW
- FRONT Auxiliary Hydraulics Operation - MAXIMUM FLOW
- FRONT Auxiliary Hydraulics Operation - CONTINUOUS FLOW
- REAR Auxiliary Hydraulics Operation
- High-Flow Hydraulics Operation (If Equipped)
- Attachment Control Device (ACD) (If Equipped)
- Bucket Position Valve Operation (If Equipped)
- DAILY INSPECTION
- Daily Inspection and Maintenance
- PRE-STARTING PROCEDURES
- Before Starting The Engine
- STARTING THE ENGINE (STANDARD PANEL, KEY SWITCH)
- Procedure
- STARTING THE ENGINE (DELUXE PANEL, KEYLESS START)
- Procedure
- Cold Temperature Starting
- WARMING THE HYDRAULIC / HYDROSTATIC SYSTEM
- Procedure
- STOPPING THE ENGINE
- Procedure
- MONITORING THE DISPLAY PANEL
- WARNING and SHUTDOWN
- ATTACHMENTS AND BUCKETS
- Choosing The Correct Bucket
- Pallet Forks
- Hand Lever Bob-Tach - Installing The Bucket Or Attachment
- Hand Lever Bob-Tach - Removing The Bucket Or Attachment
- Power Bob-Tach (Option) - Installing The Bucket Or Attachment
- Power Bob-Tach (Option) - Removing The Bucket Or Attachment
- OPERATING PROCEDURE
- Operating With A Full Bucket
- Operating With An Empty Bucket
- Filling The Bucket
- Emptying The Bucket
- Leveling The Ground (Using Lift Arms In Float Position)
- Digging Into The Ground
- Backfilling
- PARKING THE BOBCAT LOADER
- Procedure
- TRANSPORTING THE BOBCAT LOADER
- Loading Onto Transport Vehicle
- Fastening To Transport Vehicle
- TOWING THE LOADER
- Towing Procedure
PREVENTIVE MAINTENANCE78 topics
- MAINTENANCE SAFETY
- SERVICE SCHEDULE
- Chart
- LIFT ARM SUPPORT DEVICE
- Installing The Lift Arm Support Device
- Removing The Lift Arm Support Device
- OPERATOR CAB
- Raising The Operator Cab
- Lowering The Operator Cab
- Cab Door Sensor (If Equipped)
- Emergency Exit
- SEAT BAR RESTRAINT SYSTEM - ADVANCED CONTROL SYSTEM (ACS)
- Inspecting The Seat Bar
- Maintaining The Seat Bar
- BOBCAT INTERLOCK CONTROL SYSTEM (BICS)
- Inspecting The BICS Controller (Engine Stopped - Key ON or RUN/ENTER Button pressed)
- Inspecting Deactivation Of The Auxiliary Hydraulics System (Engine STOPPED - Key ON or RUN/ENTER Button pressed)
- Inspecting The Seat Bar Sensor (Engine RUNNING)
- Inspecting The Traction Lock (Engine RUNNING)
- Inspecting The Lift Arm By-Pass Control
- Inspecting Deactivation Of Lift And Tilt Functions (ACS)
- REAR DOOR
- Opening And Closing The Rear Door
- Adjusting The Rear Door
- REAR GRILL
- Removing And Installing The Rear Grill
- HEATER AND AIR CONDITIONING
- Cleaning And Maintenance
- Filters
- Evaporator
- AIR CLEANER SERVICE
- Replacing Filter Elements
- FUEL SYSTEM
- Fuel Specifications
- Filling The Fuel Tank
- Fuel Filter
- Removing Air From The Fuel System
- ENGINE LUBRICATION SYSTEM
- Checking Engine Oil
- Replacing The Oil And Filter
- ENGINE COOLING SYSTEM
- Cleaning The Cooling System
- ELECTRICAL SYSTEM
- Description
- Cleaning Battery and Terminals
- Fuse Location
- Using A Booster Battery (Jump Starting)
- Removing And Installing The Battery
- HYDRAULIC / HYDROSTATIC SYSTEM
- Checking And Adding Fluid
- Replacing Hydraulic/Hydrostatic Filter
- Replacing Hydraulic Fluid, Case Drain Filters and Steering Filter
- Breather Cap
- TIRE MAINTENANCE
- Wheel Nuts
- Rotating
- Mounting
- FINAL DRIVE TRANSMISSION (CHAINCASE)
- Checking And Adding Oil
- Removing Oil From The Chaincase
- FAN GEARBOX
- Checking And Maintaining
- DRIVE BELT
- Adjusting The Drive Belt
- Replacing The Drive Belt
- ALTERNATOR BELT
- Adjusting The Alternator Belt
- WHEEL POSITION SENSORS
- WHEEL ALIGNMENT
- Aligning The Wheels
- LUBRICATING THE BOBCAT LOADER
- Lubrication Locations
- PIVOT PINS
- Inspection And Maintenance
- BOB-TACH (HAND LEVER)
- Inspection And Maintenance
- BOB-TACH (POWER) (OPTION)
- Inspection And Maintenance
SYSTEM SETUP & ANALYSIS11 topics
- BICS SYSTEM
- Troubleshooting Guide
- DIAGNOSTICS SERVICE CODES
- Display
- Number Codes List
- DELUXE INSTRUMENT PANEL SETUP
- Deluxe Panel Upgrade
- Deluxe Panel Setup
- Passwords (Deluxe)
- SHUTDOWN FEATURE
- SERVICE CLOCK RESET
MACHINE SIGN TRANSLATIONS1 topic
- SERVICE SCHEDULE (6718398)
SPECIFICATIONS14 topics
- LOADER SPECIFICATIONS (A300)
- Machine Dimensions
- Performance
- Controls
- Engine
- Hydraulic System
- Electrical
- Drive System
- Capacities
- Tires
- BOBCAT COMPANY APPROVED ATTACHMENTS AND ACCESSORIES
- Buckets Available
- Attachments
- ADDITIONAL PUBLICATIONS AND TRAINING MATERIALS
Inside this manual
Real pages from this operation & maintenance manual (134 pages). Open the sample pages (PDF, 380 KB)
- Controls and operation, page 28: INSTRUMENT PANEL IDENTIFICATION (CONT’D)
- Maintenance, page 98: LUBRICATING THE BOBCAT LOADER
- Specifications, page 126: LOADER SPECIFICATIONS (A300) (CONT’D)
- Color page, page 18: A300 Bobcat Loader
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 134 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).