Bobcat S175, S175 High Flow Skid Steer Loader Operation & Maintenance Manual
122 pages · Publication 6901827
Added to your cart. View cart
- Models
- S175, S175 High Flow
- Serial coverage
- S/N 517625001 & Above
- S/N 518115001 & Above
- Manual type
- Operation & Maintenance Manual
- Pages
- 122
- Publication
- 6901827
- Condition
- Brand new
What's inside
From the manual's own table of contents: 10 sections, 164 entries. See sample pages (PDF, 355 KB)
FOREWORD6 topics
- SERIAL NUMBER LOCATIONS
- LOADER SERIAL NUMBER
- ENGINE SERIAL NUMBER
- DELIVERY REPORT
- BOBCAT LOADER IDENTIFICATION
- FEATURES AND ACCESSORIES
SAFETY3 topics
- SAFETY INSTRUCTIONS FOR BOBCAT SKID–STEER LOADERS AND ATTACHMENTS
- FIRE PREVENTION
- MACHINE SIGNS (DECALS)
OPERATING INSTRUCTIONS51 topics
- INSTRUMENT PANEL IDENTIFICATION
- Left Panel – Standard and Deluxe Instrument Panels
- Right Panel – Standard Instrument Panel (With Key Switch)
- Right Panel – Deluxe Instrument Panel (With Keyless Start)
- Option and Field Accessory Panels (If Equipped)
- Cab Light
- LIFT ARM BY–PASS CONTROL
- TRACTION LOCK OVERRIDE
- ENGINE SPEED CONTROL
- PARKING BRAKE
- STEERING LEVERS
- STOPPING THE BOBCAT LOADER
- SEAT BAR RESTRAINT SYSTEM
- HYDRAULIC CONTROLS
- Foot Pedals
- Hand Controls (If Equipped)
- Quick Couplers
- Releasing Hydraulic Pressure
- Attachment Auxiliary Hydraulic Controls
- Attachment Control Device (ACD) (If Equipped)
- Bucket Position Valve Operation (If Equipped)
- DAILY INSPECTION
- Daily Inspection and Maintenance
- PRE–STARTING PROCEDURE
- STARTING THE ENGINE
- Standard Instrument Panel (With Key Switch)
- Deluxe Instrument Panel (With Keyless Start)
- Cold Temperature Starting
- Warming the Hydraulic/Hydrostatic System
- STOPPING THE ENGINE
- MONITORING THE DISPLAY PANEL
- ATTACHMENTS AND BUCKETS
- Hand Lever Bob–Tach
- Power Bob–Tach
- OPERATING PROCEDURE
- Filling the Bucket (Foot Pedals)
- Filling the Bucket (Hand Controls)
- Emptying the Bucket (Foot Pedals)
- Emptying the Bucket (Hand Controls)
- Leveling the Ground (Using Lift Arms in Float Position)(Foot Pedals)
- Leveling the Ground (Using Lift Arms in Float Position)(Hand Controls)
- Digging Into the Ground (Foot Pedals)
- Digging Into the Ground(Hand Controls)
- Backfilling (Foot Pedals)
- Backfilling (Hand Controls)
- PARKING THE BOBCAT LOADER
- TRANSPORTING THE BOBCAT LOADER
- TOWING THE LOADER
- LIFTING THE LOADER
- Single Point Lift
- Four Point Lift
MAINTENANCE SAFETY75 topics
- SERVICE SCHEDULE
- LIFT ARM SUPPORT DEVICE
- Installing Lift Arm Support Device
- Removing Lift Arm Support Device
- HEATING SYSTEM
- Cleaning and Maintenance
- OPERATOR CAB
- Raising The Operator Cab
- Cab Door Sensor (If Equipped)
- Lowering The Operator Cab
- Emergency Exit
- SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS)
- Inspecting the Seat Bar
- Maintaining the Seat Bar
- SEAT BAR RESTRAINT SYSTEM ADVANCED CONTROL SYSTEM (ACS) and ADVANCED HAND CONTROLS (AHC)
- Inspecting the Seat Bar
- Maintaining the Seat Bar
- BOBCAT INTERLOCK CONTROL SYSTEM (BICS™)
- Inspecting The BICS™ Controller (Engine STOPPED – Key ON)
- Inspecting Deactivation Of The Auxiliary Hydraulics System (Engine STOPPED – Key ON)
- Inspecting The Seat Bar Sensor (Engine RUNNING)
- Inspecting The Traction Lock (Engine RUNNING)
- Inspecting The Lift Arm By–Pass Control
- Inspecting Deactivation Of Lift And Tilt Functions (AHC & ACS)
- REAR DOOR
- Opening And Closing The Rear Door
- Adjusting The Rear Door
- REAR GRILL
- AIR CLEANER SERVICE
- Replacing Filter Element
- FUEL SYSTEM
- Fuel Specifications
- Filling the Fuel Tank
- Fuel Filter
- Removing Air From The Fuel System
- ENGINE LUBRICATION SYSTEM
- Checking Engine Oil
- Oil Chart
- Replacing Oil And Filter
- ENGINE COOLING SYSTEM
- Cleaning The Cooling System
- Checking The Coolant Level
- Replacing the Coolant
- ALTERNATOR BELT
- Adjusting The Alternator Belt
- ELECTRICAL SYSTEM
- Description
- Cleaning Battery Terminals
- Fuse Location
- Using A Booster Battery (Jump Starting)
- Removing And Installing The Battery
- HYDRAULIC/HYDROSTATIC SYSTEM
- Checking And Adding Fluid
- Replacing Hydraulic/Hydrostatic Filter
- Replacing Hydraulic Fluid And Case Drain Filters
- Breather Cap
- SPARK ARRESTOR MUFFLER
- TIRE MAINTENANCE
- Wheel Nuts
- Rotating
- Mounting
- FINAL DRIVE TRANSMISSION (CHAINCASE)
- Checking And Adding Oil
- Removing Oil From The Chaincase
- FAN GEARBOX
- Checking And Maintaining
- DRIVE BELT
- Adjusting The Drive Belt
- Replacing The Drive Belt
- LUBRICATION OF THE BOBCAT LOADER
- PIVOT PINS
- BOB–TACH (Hand Lever)
- Inspection And Maintenance
- BOB–TACH (Power – Option)
- Inspection And Maintenance
SYSTEM SETUP & ANALYSIS9 topics
- Troubleshooting Chart
- DELUXE INSTRUMENTATION SERVICE CODES
- Number Codes List
- DELUXE INSTRUMENTATION PANEL SETUP
- Deluxe Panel Upgrade
- Icon Identification
- Deluxe Panel Setup
- Passwords
- Changing the Password
SPECIFICATIONS10 topics
- SKID STEER LOADER SPECIFICATIONS
- Loader Dimensions
- Performance
- Engine / Electrical
- Hydraulic System
- Drive System
- Capacities
- Controls
- BOBCAT APPROVED ATTACHMENTS & ACCESSORIES
- ADDITIONAL PUBLICATIONS and TRAINING MATERIALS
Inside this manual
Real pages from this operation & maintenance manual (122 pages). Open the sample pages (PDF, 354 KB)
- Controls and operation, page 31: Keep both feet on pedals or footrests while
- Maintenance, page 61: HEATING SYSTEM
- Specifications, page 114: SKID STEER LOADER SPECIFICATIONS (Cont’d)
- Color page, page 16: Operation & Maintenance Manual
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the S175 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 122 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).