Bobcat Toolcat 5610 Utility Work Machine Operation & Maintenance Manual
190 pages · Publication 6990053
Added to your cart. View cart
- Models
- Toolcat 5610
- Serial coverage
- APFB11001 & Above
- Manual type
- Operation & Maintenance Manual
- Pages
- 190
- Publication
- 6990053
- Condition
- Brand new
What's inside
From the manual's own table of contents: 10 sections, 300 entries. See sample pages (PDF, 425 KB)
FOREWORD13 topics
- BOBCAT COMPANY IS IS0 9001 CERTIFIED
- REGULAR MAINTENANCE ITEMS
- SERIAL NUMBER LOCATIONS
- Utility Work Machine Serial Number
- Engine Serial Number
- DELIVERY REPORT
- UTILITY WORK MACHINE IDENTIFICATION
- FEATURES, ACCESSORIES AND ATTACHMENTS
- Standard Items
- Options And Accessories
- Buckets Available
- Attachments
- Implements
SAFETY & TRAINING RESOURCES19 topics
- SAFETY INSTRUCTIONS
- Before Operation
- Safe Operation Is The Operator’s Responsibility
- Safe Operation Needs A Qualified Operator
- Use Safety Rules
- Avoid Silica Dust
- Safety Rules For Power Take-Off (PTO) Driven Implements
- FIRE PREVENTION
- Maintenance
- Operation
- Electrical
- Hydraulic System
- Fueling
- Starting
- Spark Arrestor Exhaust System
- Welding And Grinding
- Fire Extinguishers
- MACHINE SIGNS (DECALS)
- PUBLICATIONS AND TRAINING RESOURCES
OPERATING INSTRUCTIONS110 topics
- OPERATOR CONTROLS AND INSTRUMENT PANELS
- Overview
- Switch Panel
- Control Panel
- Indicator Icons
- Floor Console
- Center Console
- TOOLCAT INTERLOCK CONTROL SYSTEM (TICS)
- TICS And Arm Rest Operation
- ENGINE SPEED CONTROL
- Operation
- PARKING BRAKE
- Operation
- BACK-UP ALARM SYSTEM (IF EQUIPPED)
- Description
- Operation
- STEERING MODE SELECTION
- Operation
- TRAVEL DIRECTION CONTROL LEVER
- Operation
- Two-Speed Control
- DRIVE PEDAL
- Operation
- BRAKE PEDAL
- Operation
- STOPPING THE UTILITY WORK MACHINE
- Procedure
- WHEEL ALIGNMENT
- Procedure
- LIFT ARM BYPASS
- Operation
- HYDRAULIC CONTROLS
- Description
- Lift Arm Operation
- Lift Arm Float Position
- Tilt Operation
- Front Auxiliary Hydraulics Operation
- Front Auxiliary Hydraulics Operation (CONTINUOUS FLOW)
- Quick Couplers
- Relieve Hydraulic Pressure (Utility Work Machine And Attachment)
- High-Flow Hydraulics Operation (If Equipped)
- REMOTE AUXILIARY HYDRAULIC COUPLERS (OPTION)
- Description
- Quick Couplers And Hoses
- Operating The Remote Hydraulics
- Relieve Hydraulic Pressure (Utility Work Machine And Implement)
- ATTACHMENT CONTROL DEVICE (ACD) (IF EQUIPPED)
- Description
- RECIEVER HITCH
- Description
- Adjusting Length
- THREE-POINT HITCH (IF EQUIPPED)
- Description
- Raising
- Lowering
- Operation
- POWER TAKE-OFF (PTO) (OPTIONAL)
- Description
- Engaging PTO
- Disengaging PTO
- DAILY INSPECTION
- Daily Inspection And Maintenance
- PRE-STARTING PROCEDURE
- Entering The Utility Work Machine
- Seat And Steering Wheel Adjustment
- Seat Belt Adjustment And Arm Rest
- STARTING THE ENGINE
- Key Switch
- Keyless
- Cold Temperature Starting
- Warming The Hydraulic / Hydrostatic System
- MONITORING THE CONTROL PANEL
- Key Switch And Keyless
- Warning And Shutdown
- STOPPING THE ENGINE AND LEAVING THE UTILITY WORK MACHINE
- Procedure
- Emergency Exit (When Equipped With Cab)
- ATTACHMENTS
- Choosing The Correct Bucket
- Pallet Fork
- Installing And Removing The Attachment (Hand Lever Bob-Tach)
- Installing And Removing The Attachment (Power Bob-Tach)
- IMPLEMENT
- Choosing The Correct Implement
- Installing And Removing Pull Type Implements
- Installing And Removing Three-Point Hitch Mounted Implements
- Lifting Link Adjustment
- Top Link Adjustment
- Sway Bar Adjustment
- POWER TAKE-OFF (PTO) (IF EQUIPPED)
- Installing And Removing The PTO
- OPERATING PROCEDURE
- Inspect The Work Area
- Basic Operating Instructions
- Operating With A Full Bucket And No Implement
- Operating With An Empty Bucket And An Implement Installed
- Filling And Emptying The Bucket
- Leveling The Ground Using Float
- Backfilling
- Work Mode Operation
- Towing Equipment With The Utility Work Machine
- Safety Chains
- Operating The Three-Point Hitch Implement
- Safety Rules For PTO Operation
- Operating The PTO
- TOWING THE UTILITY WORK MACHINE
- Procedure
- TRANSPORTING THE UTILITY WORK MACHINE ON A TRAILER
- Loading And Unloading
- Fastening
PREVENTIVE MAINTENANCE109 topics
- MAINTENANCE SAFETY
- SERVICE SCHEDULE
- Chart
- Description
- Inspecting The TICS
- Maintaining The TICS
- Inspecting
- SEAT BELT
- Inspection And Maintenance
- BACK-UP ALARM SYSTEM
- Description
- Inspecting
- NEUTRAL START SYSTEM
- Inspecting
- LIFT ARM SUPPORT DEVICE
- Installing
- Removing
- PTO SWITCH
- Inspection And Maintenance
- PARKING BRAKE SYSTEM
- Inspection And Maintenance
- OPERATOR CAB
- Description
- REAR COVER
- Opening And Closing
- RIGHT COVER
- Description
- Opening And Closing
- LEFT COVER
- Description
- Opening And Closing
- CAB FILTERS
- Cleaning And Maintenance
- Fresh Air Filter
- Recirculating Air Filter
- HEATING AND AIR CONDITIONING
- Cleaning And Maintenance
- Filters
- Evaporator
- Condenser
- Air Conditioning Lubrication
- Troubleshooting
- AIR CLEANER SERVICE
- Replacing Filter Elements
- OPERATOR SEAT
- Removal And Installation
- PASSENGER SEAT
- Removal And Installation
- FUEL SYSTEM
- Fuel Specifications
- Biodiesel Blend Fuel
- Filling The Fuel Tank
- Fuel Filter
- Removing Air From The Fuel System
- Filling A Portable Fuel Container
- ENGINE LUBRICATION SYSTEM
- Checking And Adding Engine Oil
- Engine Oil Chart
- Removing And Replacing Oil And Filter
- ENGINE COOLING SYSTEM
- Checking Level
- Cooling System Service Access Position
- Cleaning
- Removing And Replacing Coolant
- ELECTRICAL SYSTEM
- Description
- Fuse And Relay Location - Cab Panel
- Fuse And Relay Location - Frame Panel
- Battery Maintenance
- Using A Booster Battery (Jump Starting)
- Removing And Installing Battery
- HYDRAULIC / HYDROSTATIC SYSTEM
- Checking Fluid
- Hydraulic / Hydrostatic Fluid Chart
- Adding Fluid
- Removing And Replacing Hydraulic / Hydrostatic And Case Drain Filters
- Removing And Replacing Hydraulic Fluid
- Breather Cap
- SPARK ARRESTER MUFFLER
- Cleaning Procedure
- SUPPORTING THE MACHINE ON JACKSTANDS
- Procedure
- TIRE MAINTENANCE
- Wheel Nuts
- Rotating
- Mounting
- TRANSAXLE (FRONT AND REAR)
- Checking And Adding Lubricant
- Removing And Replacing Lubricant
- ALTERNATOR BELT
- Belt Adjustment
- Belt Replacement
- AIR CONDITIONING BELT (IF EQUIPPED)
- Belt Adjustment
- Belt Replacement
- DRIVE BELT
- Belt Adjustment
- Belt Replacement
- LUBRICATING THE UTILITY WORK MACHINE
- Lubrication Locations
- PIVOT PINS
- Inspection And Maintenance
- BOB-TACH (HAND LEVER)
- Inspection And Maintenance
- BOB-TACH (POWER OPTION)
- Inspection And Maintenance
- UTILITY WORK MACHINE STORAGE AND RETURN TO SERVICE
- Storage
- Return To Service
SYSTEM SETUP & ANALYSIS15 topics
- DIAGNOSTIC SERVICE CODES
- Viewing Service Codes
- Service Codes List
- CONTROL PANEL SETUP
- Enter Setup
- Two-Speed
- High Flow
- Horsepower Management
- Tire Size
- Save Setup
- Exit Setup
- PASSWORD SETUP (IF EQUIPPED WITH KEYLESS START)
- Password Description
- Changing The Owner And Operator Passwords
- Password Lockout Feature
MACHINE SIGN TRANSLATIONS5 topics
- Service Schedule (7201411)
- Machine Load Capacities (6814303)
- Operation Instruction (6814309)
- Wheel Alignment (6814813)
- Auxiliary Coupler (6731757)
SPECIFICATIONS19 topics
- MACHINE LOAD CAPACITIES
- Loader Rated Operating Capacity (ROC)
- Three-Point Hitch Lift Capacity
- Maximum Storage Bin Load (Each)
- Maximum Trailer Hitch Tongue Weight
- (5610) UTILITY WORK MACHINE SPECIFICATIONS
- Dimensions (With 27 Inch Tires And Without Three-Point Hitch Option)
- Dimensions (With 27 Inch Tires And With Three-Point Hitch Option)
- Dimensions (With 29 Inch Tires And Without Three-Point Hitch Option)
- Dimensions (With 29 Inch Tires And With Three-Point Hitch Option)
- Performance
- Controls
- Engine
- Hydraulic System
- Electrical
- Power Take-Off (PTO) System
- Drive System
- Capacities
- Tires
Inside this manual
Real pages from this operation & maintenance manual (190 pages). Open the sample pages (PDF, 424 KB)
- Controls and operation, page 30: OPERATOR CONTROLS AND INSTRUMENT PANELS
- Maintenance, page 120: ENGINE LUBRICATION SYSTEM (CONT’D)
- Specifications, page 180: (5610) UTILITY WORK MACHINE SPECIFICATIONS (CONT’D)
- Color page, page 18: 5610 Operation & Maintenance Manual
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the Toolcat 5610 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 190 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).