Bobcat V518 VersaHandler, V518 VersaHandler Canopy, V623 VersaHandler and 3 more Telescopic Tool Carrier (TTC) Operation & Maintenance Manual
92 pages · Publication 6901155 · V518 VersaHandler, V518 VersaHandler Canopy, V623 VersaHandler, V623 VersaHandler With Frame Leveling, V623 VersaHandler Canopy, V623 VersaHandler Canopy With Frame Leveling
Added to your cart. View cart
- Models
- V518 VersaHandler, V518 VersaHandler Canopy, V623 VersaHandler, V623 VersaHandler With Frame Leveling, V623 VersaHandler Canopy, V623 VersaHandler Canopy With Frame Leveling
- Serial coverage
- V518 - S/N 367011001 & Above
- V518 - S/N 367311001 & Above (With Canopy)
- V623 - S/N 367111001 & Above
- V623 - S/N 367211001 & Above (With Frame Leveling)
- V623 - S/N 367511001 & Above (With Canopy)
- V623 - S/N 367411001 & Above (With Canopy & Frame Leveling)
- Manual type
- Operation & Maintenance Manual
- Pages
- 92
- Publication
- 6901155
- Condition
- Brand new
What's inside
From the manual's own table of contents: 8 sections, 115 entries. See sample pages (PDF, 396 KB)
FOREWORD7 topics
- SERIAL NUMBER LOCATIONS
- VersaHANDLER SERIAL NUMBER
- ENGINE SERIAL NUMBER
- OTHER SERIAL NUMBERS
- DELIVERY REPORT
- BOBCAT VersaHANDLER IDENTIFICATION
- FEATURES AND ACCESSORIES
SAFETY5 topics
- SAFETY INSTRUCTIONS FOR THE BOBCAT VersaHANDLER TELESCOPIC TOOLCARRIER (TTC) AND ATTACHMENTS
- SAFE OPERATION IS THE OPERATOR’S RESPONSIBILITY
- BEFORE OPERATING THE BOBCATVersaHANDLER Telescopic Tool Carrier (TTC)
- FIRE PREVENTION
- MACHINE SIGNS (DECALS)
OPERATING INSTRUCTIONS33 topics
- OPERATOR CONTROLS IDENTIFICATION
- Operator Components
- Travel Direction & Two–Speed Control
- Direction Signal
- Front Wiper / Washer / Headlight Dimmer
- Steering Wheel Tilt Adjustment
- Center Instrument Panel
- Right Instrument and Indicator Panel
- Parking Brake
- Accelerator Pedal
- Brake Pedal and Inching Control
- Frame Level Switch (V623 With Frame Level Only)
- HYDRAULIC CONTROLS
- Hydraulic Control Lever (Joystick)
- STEERING CONTROLS
- Steering Mode Selection
- LATERAL OPERATOR RESTRAINT SYSTEM (LORS™)
- SERVICE SCHEDULE DECAL
- DAILY INSPECTION
- Daily Inspection and Maintenance
- PRE–STARTING PROCEDURE
- STARTING THE ENGINE
- BEFORE USING THE VersaHANDLER
- ATTACHMENTS AND BUCKETS
- Installing The Bucket Or Attachment
- Removing The Bucket Or Attachment
- VersaHANDLER OPERATION
- Raising A Load And Extending The Boom
- Using Frame Leveling (V623 With Frame Level Only)
- Load Capacity Charts
- PARKING THE VersaHANDLER
- TRANSPORTING THE VersaHANDLER
- TOWING THE VersaHANDLER
PREVENTIVE MAINTENANCE58 topics
- MAINTENANCE SAFETY
- SERVICE SCHEDULE
- OPERATOR CAB / CANOPY
- Emergency Exit (All Models)
- CAB DOOR (EARLIER MODELS)
- Cab Door Window (Earlier Models)
- Cab Door (Later Models)
- Cab Door Window (Later Models)
- BOOM STOP
- Installing Boom Stop
- Removing Boom Stop
- ENGINE COVER
- System Inspection
- System Maintenance
- AIR CLEANER SERVICE
- Replacing Filter Element
- FUEL SYSTEM
- Fuel Specifications
- Filling The Fuel Tank
- Fuel Filter
- ENGINE LUBRICATION SYSTEM
- Checking Engine Oil
- Oil Chart
- Replacing Oil And Filter
- ENGINE COOLING SYSTEM
- Cleaning The Cooling System
- Checking The Coolant Level
- Replacing The Coolant
- ALTERNATOR BELT
- Adjusting
- SPARK ARRESTOR MUFFLER
- ELECTRICAL SYSTEM
- Description
- Battery & Terminal Maintenance
- Fuses, Diodes & Relays
- Using A Booster Battery (Jump Starting)
- Battery Disconnect Switch
- HYDRAULIC/HYDROSTATIC SYSTEM
- Checking And Adding Fluid
- Replacing Hydraulic/Hydrostatic Filter
- Replacing Hydraulic Fluid
- BRAKE CONTROL SYSTEM
- Inspection and Maintenance
- AXLES (FRONT AND REAR)
- Checking Oil Level (Front Differential)
- Draining Oil (Front Differential)
- Checking Oil Level (Rear Differential)
- Draining Oil (Rear Differential)
- Checking Oil Level (Planetary Carrier)
- Draining Oil (Planetary Carrier)
- TIRE MAINTENANCE
- Wheel Nuts
- Tire Mounting
- Tire Rotation
- TIRE PRESSURE
- LUBRICATION
- ATTACHMENT FRAME
- Inspection And Maintenance
SPECIFICATIONS4 topics
- VersaHANDLER Telescopic Tool Carrier (TTC) SPECIFICATIONS
- BOBCAT APPROVED ATTACHMENTS & ACCESSORIES
- ATTACHMENTS
- ADDITIONAL PUBLICATIONS and TRAINING MATERIALS
Inside this manual
Real pages from this operation & maintenance manual (92 pages). Open the sample pages (PDF, 395 KB)
- Controls and operation, page 27: View From Cab
- Maintenance, page 65: LUBRICATION
- Specifications, page 87: 24 inches
- Color page, page 16: Operation & Maintenance Manual
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 92 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).