Case Axial Flow 7230, 8230, 9230 Combine Operator's Manual

Name: Case Axial Flow 7230, 8230, 9230 Combine Operator's Manual
Brand: MidWestTech
SKU: 47372498
Price: 69.81 USD
Availability: InStock

576 pages · Publication 47372498

$69.81

Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.

Models: Axial Flow 7230, 8230, 9230
Manual type: Operator's Manual
Pages: 576
Publication: 47372498
Condition: Brand new

Case Axial Flow 7230, 8230, 9230 Combine Operator's Manual, publication 47372498

What's inside

From the manual's own table of contents: 58 sections, 229 entries. See sample pages (PDF, 770 KB)

Search the contents

Intended use

Product identification

Note to the owner

Machine orientation

Engine tampering

Electro-Magnetic Compatibility (EMC)

International symbols

Safety alert symbol and signal word definition

Safety rules

General safety rules

Wheels and tires

Transport on public roads

Fire prevention

Fire extinguisher

Battery safety

Instructional seat safety

Operator presence system

Seat belt precautions

Air conditioning

Reverse Alarm and Light

Personal protective equipment (PPE)

Maintenance Safety

Do Not Operate hang tag

Hazardous chemicals

Show all 58 sections

Electrical storm safety

Mounting and dismounting precautions

Operating the machine

Connecting a header

Hydraulic system safety

Working at heights

Ecology and the environment

Illustrations

Header/Attachment height system - Personal safety – Lift cylinder lockout

Safety signs171 topics

Operator's seat
Steering column and control pedals
- Start console
- Multi Function Handle (MFH) and Controls
- Right-hand console
- Reel speed
- Overhead Controls
- Heating, Ventilation, Air Conditioning (HVAC) controls
- Air-conditioning switch panel - Overview
- Lighting and Mirrors
- Operator's Platform
- Fuses and relays
- Engine, Rear Platform Access
- Side shields - Open/Close
- Service Platforms and Shielding
- Module Adjustment Access
- Grain Tank Extensions
- Grain tank - Access/Exit
- Emergency Exit
- Jack – Locations
- Tracks
- Track system - Rubber Track Warranty
- Track conditioning
- Tracks Hard Surface Road Transporting
- Transmission unlock
- Before driving the combine
- Daily start up procedure
- Idle engine speed control
- Stopping the machine
- Moving the machine
- Parking Brake - Manual release
Transmission - Manual shifting
Transporting on a trailer - Tie downs for shipping
Attaching a Trailer
Towing the machine
Introduction to Harvesting
Performance indicators
Losses
Initial crop settings - AFX Rotor
Initial crop settings – Small tube rotor 40E
Initial crop settings – Small tube rotor 36E
Kill-Stall Diagnosis
Crop setup values - Crop Condition Adjustment
- Home screen
- Toolbox
- Diagnostics
- Combine info
- Performance
- Run screens
- Screen layout setup
- Automatic Crop Settings (ACS)
- Data management
- Camera - Configure
- Abbreviations used in the monitor
- Calibrations
- Multifunction Handle
- Header calibration
- Tire Radius
- Groundspeed Hydrostat
- Concave Position
- Upper Sieve
- Lower Sieve
- Self-leveling Shoe
- CVT Rotor
- CVT Feeder
- Calibration error list
- Header height control overview
- Header height control
- Header height control – Manual mode
- Header height control – Return To Cut (RTC) mode
- Header height control – Auto Header Height Control (AHHC)
- Header height control – Pressure float mode
- Lateral tilt
- Connecting a header
- Header Setup
- Row Header Setup
- Platform Header Setup
- Feeder
- Rock trap
- Feeder Cradle
- Conveyor Drum Lower Stop
- Feeder drum
- Feeder chain Link Removal
- Rotor
- Rotor cage
- Module Position Overview
- Module Adjustment
- Threshing and separation
- Suggested Start up Configurations for Major Crops
- Rotor overview
- Rotor De-slug
- Cleaning – Overview
- Sieves - Removal
- Sieves - Installation
- Cleaning fan
- Returns system
- Grain storage
- Clean grain elevator drive – Change speeds
- Unloading
- Residue handling
- Straw chopper
- Knife replacement
- Discharge deflector
- Chaff pan
- Windrow door
- Windrow chute
- Residue spreader
- Spreader chutes – Adjustment
- Center divider – Adjustment
- Dual disc spreader
Torque specifications for hydraulic fittings - Standard torque data for hydraulics
(ORFS) fittings
Chain wear tables - roller chains
Overview
Service screen
Fuses and relays
Battery
Lubrication schedule
Engine oil – Recommended operating temperature range
Lubrication and oil specifications — Recommended operating temperature range
Capacities
Rotary air screen
Engine oil level
Power take off (PTO) gearbox oil level
Hydraulic oil tank – Oil level
Rock trap
Chain maintenance
Deaeration tank coolant level
Tire pressure – Check
Cab air filter
Cab recirculated air filter
Feeder drum
Chain tension
- Grease fittings
- Rotor gearbox oil
- Grease fittings
- Bubble up gear box
- Brake fluid – Service brakes
- Parking brake
- Traction gearbox oil level
- Final drive oil level
- Unloading tube gearbox oil
- Feeder conveyor gearbox
- Header Gearbox – Oil level
- hours Service
- Transmission – Change oil
- Final drive oil
- Unloading tube gearbox oil – Change oil
- Feeder conveyor gearbox
- Header Gearbox – Change oil
- Unloading elbow
- Tailings Gearbox
- Bubble up gear box – Change oil
- Rotor gearbox oil
- Self-levelling cleaning shoe pivot
- PTO Gearbox
- Engine oil and filter – FPT Cursor 9
- Engine oil and filter – FPT Cursor 13
- Fuel prefilter/water separator
- Additional fuel prefilter with water separator – If equipped
- Engine mounted fuel filter
- Fuel system bleeding
- Engine crankcase breather filter – Cursor 9 engine
- Engine crankcase breather filter – Cursor 13
- Engine coolant replacement
- Hydraulic oil change - Hydraulic oil
- Track rollers and idler wheels
- Track System – Alignment
- Post-season
- Preseason Service
- Display alarms

Biodiesel fuel - Biodiesel Fuels

Tire care

Drive tire – Overview

Dual drive wheel - Overview

Temporary transport - Single wheel

Steering axle – Overview

Powered rear axle – Hose routing

Spindle height position

Tread width - Rear axle

Tire combinations and tread positions – AF7230/8230/9230

Tire / Operator Platform Extension Combinations

Tire pressure

mph harvest speed – AF7230

Rear ballast – AF7230

Track system – Overview

Track system – Wheel torque

Tracks – General specification

Machine overall dimensions

Machine specifications

Optional equipment

Delivery report - Owner Copy

Delivery report - Dealer Copy

Service record - 1st 50 Hour, Customer Copy

Service record - 1st 50 Hour, Dealer Copy

Inside this manual

Real pages from this operator's manual (576 pages). Open the sample pages (PDF, 769 KB)

Sample pages from the Case Axial Flow 7230, 8230, 9230 Combine Operator's Manual: Controls and operation, Maintenance, Specifications, Color page, Color page, Foldout diagram

Controls and operation, page 282: FEEDING
Maintenance, page 442: 7 - MAINTENANCE
Specifications, page 546: 9 - SPECIFICATIONS
Color page, page 55: 2 - SAFETY INFORMATION
Color page, page 237: 6 - WORKING OPERATIONS
Foldout diagram: 9 - SPECIFICATIONS

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the Axial Flow 7230, 8230, 9230 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operator's Manual 47372498$69.81

Service manuals

Service Manual 47548079 · 4,275 pagesCovers Axial Flow 7230, 8230, 9230Serial: from PIN YDG218533 and above$429.77Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 576 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Binder not included

Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).