MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Case SR130, SR210, SR160, SR240, SR175, SV185, SV280, TR270, TR310 Tier 4B Alpha Series Skid Steer Compact Track Loader Operator's Manual

309 pages · Publication 47948412

$69.55
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
SR130, SR210, SR160, SR240, SR175, SV185, SV280, TR270, TR310 Tier 4B Alpha Series
Serial coverage
PIN NGM418237 and above, PIN NGM418237 and above
Manual type
Operator's Manual
Pages
309
Publication
47948412
Condition
Brand new
Case SR130, SR210, SR160, SR240, SR175, SV185, SV280, TR270, TR310 Tier 4B Alpha Series Skid Steer Compact Track Loader Operator's Manual, publication 47948412

What's inside

From the manual's own table of contents: 29 sections, 140 entries. See sample pages (PDF, 496 KB)

Note to the owner
Electro-Magnetic Compatibility (EMC)
Product identification
Operator's manual storage on the machine
Machine orientation
Machine components
Safety rules and signal word definitions
Safety rules
Utility safety
Proper entry and exit
Starting and stopping precautions
Seat belt precautions
Specific precautions to this machine
Fire extinguisher
Safety rules - California Proposition 65 Warning
Roll Over Protective Structure (ROPS)
Welding on the machine
Loader arm lock and cab tilt procedure - radial lift machines
Loader arm lock and cab tilt procedure - vertical lift machines
No engine power - loader arm down control
Emergency exit
Ecology and the environment
Safety signs111 topics
  • Door latches, cab
  • Window glass, cab
  • Windshield wiper and washer controls
  • Cab air louvers
  • Standard seat
  • Mechanical suspension seat
  • Air seat
  • Seat belt operation
  • Shoulder belt
  • Restraint bar
  • Steering and travel
    • Moving the machine
    • Turning the machine
  • Lift arm and bucket controls
    • Hand controls
    • Foot controls
  • Control pattern overview
    • Standard H control pattern
    • Standard ISO control pattern
    • Electro-hydraulic control handle adjustment
  • H control pattern steering and travel
    • Hand controls
    • Moving the machine
    • Turning the machine
  • H control pattern lift arm and bucket controls
    • Lift arm raise/lower control
    • Bucket curl/dump control
  • ISO control pattern steering and travel
    • Moving the machine
    • Turning the machine
  • ISO control pattern lift arm and bucket controls
    • Lift arm and bucket controls
    • Switch configurations
    • Two-speed function
    • Standard auxiliary hydraulics
    • High flow auxiliary hydraulics
    • Enhanced High Flow (EHF) auxiliary hydraulics
    • Electronic Instrument Cluster (EIC)
    • Advanced Instrument Cluster (AIC)
    • Instrument cluster
    • Left-hand column switch identification
    • ISO or H pattern control switch
    • Machine lights
    • Operating Instructions
  • Engine operation
  • Operating in extreme temperatures
  • Throttle control
  • Parking the machine and stopping the engine
  • Booster battery procedure
  • Machine operation
  • Transporting the machine
  • Moving a disabled machine
  • Mechanical attachment mounting systems
  • Hydraulic attachment mounting systems
  • Field operation
  • General safety before you service
  • Lubrication analysis program
  • Plastic and resin parts
  • Machine cleaning
  • Window removal and cleaning
  • Cab door removal and installation
  • Battery safety - check and cleaning
  • Fire extinguisher
  • Engine hourmeter
  • Fluids and lubricants
  • Engine oil viscosity
  • Hydraulic oil viscosity
  • Organic Acid Technology (OAT) coolant
  • General specification - Diesel fuel
  • General specification - Biodiesel fuels
  • Lubrication and maintenance access
  • Fuses and relays
    • Maintenance chart
    • Track tension check and adjustment
    • Tire pressure and wheel hardware torque
    • Clean tracks and components
    • Engine and hydraulic coolers
    • Engine coolant level
    • Engine oil level
    • Loader arm pivot points, coupler pins, and cylinder pins
    • Hydraulic oil level
    • Loader arm and bucket hydraulic interlock
    • Roll Over Protective Structure (ROPS) mechanism and hardware check
    • Cab intake filter
    • Seat restraints - Check
    • Final drive oil (track models)
    • In-line fuel filter (models SR130 and SR160 only)
    • Fuel pre-filter
    • Drive chain tension check
    • Tire pressure and wheel hardware torque
    • Engine oil and filter
    • Fuel pre-filter
    • Fuel filter
    • Hydraulic oil filter
    • Final drive chain tank oil
    • Air cleaner elements
    • Final drive oil (track models)
    • Roll Over Protective Structure (ROPS) mechanism and hardware check
    • Hydraulic fluid and filter
    • Final drive chain tank oil
  • Oil Mist Separator (OMS) filter (models SR130, SR160, SR175, and SV185 only)
  • Engine cooling system - Change fluid – SR130, SR160, SR175, and SV185 only
  • only)
  • Diesel Particulate Filters (DPF) - Cleaning (models SR130 and SR160 only)
  • Auto-regeneration
  • Manual regeneration
  • Hardware - loose or damaged
    • Storing the machine
    • Preparing the machine after storage
    • Display warnings
    • Fault code index
Fluids and lubricants
Show all 29 sections
General specification
Material weights
Units of measure and conversion
Torque charts - Minimum tightening torques for normal assembly
Telematics - Overview with Case SiteWatch™

Inside this manual

Real pages from this operator's manual (309 pages). Open the sample pages (PDF, 495 KB)

Sample pages from the Case SR130, SR210, SR160, SR240, SR175, SV185, SV280, TR270 and 1 more Skid Steer Compact Track Loader Operator's Manual: Controls and operation, Maintenance, Specifications, Color page
  • Controls and operation, page 87: 3 - CONTROLS AND INSTRUMENTS
  • Maintenance, page 207: MAINTENANCE CHART
  • Specifications, page 279: 9 - SPECIFICATIONS
  • Color page, page 57: 2 - SAFETY INFORMATION

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operator's Manual 47948412$69.55
Other manuals for the SR130

Service manuals

Details
Details

Parts manuals

Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 309 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Binder not included

Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.

Other editions and similar models

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).