MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Case W36 Loader Service Manual

1,057 pages · Publication 8-70000

$109.95
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
W36
Serial coverage
PIN 17754000 and After
Manual type
Service Manual
Pages
1,057
Publication
8-70000
Condition
Brand new
Case W36 Loader Service Manual, publication 8-70000

What's inside

From the manual's own table of contents: 52 sections, 112 entries. See sample pages (PDF, 524 KB)

Maximum Service Limit
Maximum Service Limit 2
Maximum Service Limit
Cylinder Bore
Maximum Service Limit
Maximum Service Limit 0.0
Maximum Service Limit
Maximum Out of Round (Installed in BIOCK)
Maximum Taper (Installed in BIOCK)
Sleeve Protrusion
Standard SiZe PIStON1 topic
  • Minimum Service limit
ID Of Piston Pin Bore
Maximum Service Limit
Width of 1st Ring Groove (TOP)
Width of 2nd Ring Groove (Intermediate)
Width of 3rd Ring Groove (Oil RING)
Protrusion Above Cylinder Block (MaXiMUM)
OD Of Pin
Minimum Service Limit22 topics
  • Warpage (MaXximum)
    • Valve Guide Bore oo
    • Maximum Service Limit 0.0.0
    • Insert Bore (INtAKE)
    • Maximum Service Limit 00.0
    • Insert Bore Depth (Intake)
    • Maximum Service Limit 0
    • Insert Bore (EXNaUSt) 0
    • Maximum Service Limit 0
    • Insert Bore Depth (Exhaust)
    • Maximum Service Limit
    • Bore Diameter in BlOCK
    • Bushing ID Installed (Ream to SIZE)
    • Maximum Service Limit 0.0.0
    • Journal ID Without Bearing Liners
    • Maximum Service Limit
    • Bearing Oil Clearance
    • Maximum Service Limit
    • Side Clearance
    • Maximum Service Limit oo
    • Without BUSHING «0.0
    • Without BUSHING oo
Crankshaft End Clearance1 topic
  • Maximum Service Limit
Center Main Bearing Thrust Surface ThiCkKNeSS7 topics
  • Maximum Service Limit
  • mm OD Undersize, Grind tO
  • Maximum Service Limit
  • mm OD Undersize, Grind t0
  • Maximum Service Limit
  • mm OD Undersize, Grind to
  • Maximum Service Limit
Connecting Rod Journal Maximum Taper
Journals Out Of ROUNG MaxiMUM
Undersize Main Bearing Liners For Service
Show all 52 sections
Main Bearing Oil Clearance 0.0
Maximum Service Limit 0.0
OD, Standard oo9 topics
  • Maximum Service Limit
  • mm OD Undersize, Grind to
  • Maximum Service Limit
  • mm OD Undersize, Grind tO
  • Maximum Service Limit
  • mm OD Undersize, Grind t0
  • Maximum Service Limit
  • mM OD Undersize, Grind tO
  • Maximum Service Limit
Main Bearing Journal Bore ID No LIN@PS
Connecting Rod Journals Width20 topics
  • Oil CleArANCe no
    • ID of Bushings (Installed)
    • Maximum Service Limit
    • Width of BUSHING
    • Camshaft JOUrNa! OD
    • Minimum Serviceable Limit 0.0.00
    • Camshaft Bore Diameter in Block Bushing Bore ou
    • Camshaft Thrust Thickness
    • Minimum Service Limit
    • Camshaft Thrust Clearance
    • Maximum Service Limit
    • Horizontal Travel of Turbine Shaft 0.0.0.0
    • Crankshaft Gear to Camshaft Gear oo
    • Crankshaft Gear to Idler Gear
    • Camshaft to Fuel PUMP Gear
    • Idler Gear to Oil PUMP
    • Camshaft to AUXil Ary
    • Minimum Service Limit
    • ID Of APM BOP ou
    • LUDTICATION
Tappet Clearance (Cold) oo
Face RUN-OUut
Valve Head Edge Thickness, MINiMUM
OD Of HOA
Seat ANIC
Seat RUN-OUt
Valve Recession Below Head Surface
ID of Maximum Valve Guide Service Bore Limit
Maximum Service Limit 0.0
Valve Guide Installed Height
Valve Head Edge Thickness, MinimUm
Minimum Service Limit
Seat RUM-Out
Insert Height
OD Of INSEFt a
ID Of INSOPt a
Valve Recession Below Head Surtace 0.0.0
Maximum Service Limit
ID Of Valve Guide Bre
Maximum Service Limit
Valve Guide Installed Height
Wire DiaMeter
Outside Diameter

Inside this manual

Real pages from this service manual (1,057 pages). Open the sample pages (PDF, 523 KB)

Sample pages from the Case W36 Loader Service Manual: Foldout diagram
  • Foldout diagram, page 385

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the W36 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Service Manual 8-70000$109.95
Other manuals for the W36

Operator's manuals

Details
Details
Details

Parts manuals

Details

This is a service manual

Here's how it compares to the other manual types.

This manual

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

Engine service manuals are sometimes sold separately, since certain machine models were offered with more than one engine option.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 1,057 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Binder not included

Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.

Other editions and similar models

Case W36Service Manual · 9-66874 · $119.85

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).