MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Hyster H360-650C, H370-700C (C008) Heavy Duty Forklift Service Manual

804 pages · Publication 599974

$89.93
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
H360-650C, H370-700C (C008)
Serial coverage
H360-650C TO S/N1550, H370-700C S/N1550-UP (C008)
Manual type
Service Manual
Pages
804
Publication
599974
Condition
Brand new
Hyster H360-650C, H370-700C (C008) Heavy Duty Forklift Service Manual, publication 599974

What's inside

From the manual's own table of contents: 70 sections, 193 entries. See sample pages (PDF, 141 KB)

Three-Speed Powershift Transmission
Safety Precautions Maintenance and Repair
General
Mechanical Description11 topics
  • General
  • Torque Converter
    • Description
    • Operation
  • Clutch Assemblies
    • Description
    • Operation
  • Forward Shaft
  • Reverse Shaft
  • First Speed Shaft
  • Output Shaft
Hydraulic Operation20 topics
  • Sump, Filter, and Pump
  • Shift Control Valve
    • Solenoid Valves
    • Inching Spool
    • Direction Spools
    • Range Spools
  • Modulator Valve and Manifold Block
    • Operation
  • Transmission Control System H20.00-32.00F (H440-700F) (without a
  • Transmission Control System H20.00-32.00F (with auto shift APC 1
    • Gear Selector
    • Automatic Powershift Control
    • Bypass Box and Bypass Plug
  • Hydraulic Circuits
    • Cooling and Lubrication
    • Operation of Transmission, Neutral
    • Operation of Transmission, Forward - First
    • Operation of Transmission, Reverse - First
    • Operation of Transmission, Forward - Second
    • Operation of Transmission, Forward - Third - Inching
Cooling System
Description5 topics
  • Radiator
  • Radiator Cap
  • Thermostat
  • Water Pump
  • Fan and Fan Shroud
Cooling System Checks1 topic
  • Exhaust Leaks
Radiator Cleaning3 topics
  • Drain
  • Clean
  • Fill
Troubleshooting
Alternator with Regulator
Alternator Repair10 topics
  • Alternator Type A
    • Remove and Disassemble
    • Clean
    • Assemble
    • Install
  • Alternator Type B
    • Remove and Disassemble
    • Clean
    • Assemble
    • Install
General Check and Adjustment
Low Output Check (Type A or Type B)
High Output Check (Type A or Type B)
Brushes Circuit Check2 topics
  • Delco Alternators
  • Motorola Alternators
Diodes Check
Diode Bridge Check1 topic
  • Delco and Leece-Neville Alternators
Rotor Field Winding Check
Stator Windings Check
Voltage Regulator Check
Planetary Gear Axle
Operation
Planetary Gear Axle Repair5 topics
  • Remove
  • Disassemble
    • Planetary Axle, Disassemble
  • Assemble and Install
    • Planetary Axle, Assemble
Show all 70 sections
Torque Specifications
Table 1. Axle-to-Frame Fasteners
Table 2. Standard Torque Values for Axle Fasteners
Table 3. Drive Wheel Nut Torque
Differential
Differential Repair21 topics
  • Differential Carrier From Axle Housing, Remove
    • Differential and Ring Gear From Differential Carrier, Remove
    • Drive Pinion and Pinion Carrier From Differential Carrier, Remov
    • Differential and Ring Gear Assembly, Disassemble
    • Drive Pinion and Pinion Carrier, Disassemble
  • Clean and Inspect
  • Assemble
    • Pinion, Bearings, and Pinion Carrier, Assemble
    • Pinion Bearings, Adjust Preload
    • Triple-Lip Seal, Install
    • Pinion Carrier Shim Set, Adjust Thickness (Depth of Pinion)
    • Differential and Ring Gear, Assemble
    • Differential Gears Rotating Torque, Check
    • Differential and Ring Gear Assembly, Install
    • Differential Bearings, Preload Adjust
    • Ring Gear, Runout Check
    • Ring Gear Backlash, Adjust
    • Gear Set, Tooth Contact Pattern Check
    • Thrust Screw, Install and Adjust
  • Install
    • Differential Assembly Into Axle Housing, Install
Specifications
Table 1. Ring Gear Backlash Adjustment Specifications
Table 2. Ring and Pinion Tooth Contact Adjustment
Table 3. General Specifications
Table 4. Rivet Installation Pressure
Table 5. Pinion Adjustment
Table 6. Pinion Preload Pressure
Table 7. Torque Specifications
Table 8. Torque Specifications for Metric Hardware
Table 9. Torque Specifications for Metric (Fine) Hardware
Hydraulic Gear Pumps2 topics
  • Flow Control Valve
  • Relief Valve
Hydraulic Gear Pump Repair1 topic
  • Inspect
Pump Output Check2 topics
  • Method No. 1
  • Method No. 2
Hydraulic System Air Check
Tilt Cylinders
Tilt Cylinder Repair4 topics
  • Tilt Cylinders With O-Ring or Single-Lip Seals
    • Tilt Cylinders for XM and XMS Models
    • Tilt Cylinders for H700-800A and Early Model H700-920B
    • Tilt Cylinders Using Chevron Packing
Tilt Cylinder Leak Check
Tilt Cylinder Stroke and Mast Tilt Angle Adjustment2 topics
  • Piston Rod Nut
  • Retainer
Table 1. Movement Rates (Maximum) for Tilt Cylinders
Starter
Description and Operation
Starter Repair
General Checks and Adjustments
Instrument Panel Indicators and Senders14 topics
  • Steering Column Gauges, Meters, and Indicators
  • LED Display Panel
    • Battery Discharge Indicators
    • Brush Wear Indicators
    • Motor Temperature Indicators
  • LX Series Display Panel
    • Hourmeter Functions
    • Battery Indicator Function
    • Status Code Function
  • ZX Series Display Panels
    • Display Panel
    • Basic Display Panels
    • Performance Display
    • Brush Wear Indicators
Adjustments - General
Replacement - General Information
Meter Replacement
Sender Replacement2 topics
  • Fuel Level Sender
  • Pressure and Temperature Sender
ITW Display Panel Replacement
Column Mount Display Panel (EV-100/200ZX Motor Controllers) Repl7 topics
  • Display Panel Assembly, Replace
  • Indicator LEDs
  • Battery Indicators
  • Digital Display (Performance Display Panel Only)
  • Status Code or Performance Level Switches and Indicator LEDs (Pe
  • Basic Display Panel, Replace Parts
  • Performance Display Panel, Replace Parts
Dash Mount Display Panel (EV100/200ZX Motor Controllers) Replace4 topics
  • Remove and Replace
  • Meter Specifications
  • Sender Specifications
  • Meter
Metric and Inch (SAE) Fasteners6 topics
  • Threaded Fasteners
  • Nomenclature, Threads
  • Strength Identification
  • Cotter (Split) Pins
  • Fastener Torque Tables
  • Conversion Table
Table 1. Bolts and Screws
Table 2. Studs and Nuts
Table 3. Torque Nuts
Table 4. Torque Nuts With Nylon Insert
Table 5. Torque Values for Metric Fasteners*
Table 6. Torque Values for Inch Fasteners*
Table 7. Conversion Table for Metric and English units
Table 8. Cotter Pin Dimensional Data

This is a service manual

Here's how it compares to the other manual types.

This manual

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

Engine service manuals are sometimes sold separately, since certain machine models were offered with more than one engine option.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 804 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Binder not included

Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).