Komatsu D39EX-22, D390PX-22, D39PX-22 Bulldozer Operation & Maintenance Manual
266 pages · Publication TEN00469-01
Added to your cart. View cart
What's inside
From the manual's own table of contents: 86 topics. See sample pages (PDF, 405 KB)
- GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
- PRECAUTIONS BEFORE STARTING OPERATION
- PREPARATIONS FOR SAFE OPERATION
- FIRE PREVENTION
- PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
- DO NOT GET CAUGHT IN WORK EQUIPMENT
- PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
- UNAUTHORIZED MODIFICATION
- PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
- PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
- PRECAUTIONS FOR OPERATION
- PRECAUTIONS FOR JOBSITE
- STARTING ENGINE
- OPERATION
- TRANSPORTATION
- TOWING
- PRECAUTIONS FOR MAINTENANCE
- PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
- PRECAUTIONS FOR INSPECTION AND MAINTENANCE
- SWITCHES
- CONTROL LEVERS AND PEDALS
- FUSE
- ELECTRIC POWER TAKE-OUT ADAPTER
- DOOR - OPEN LOCK
Show all 86 topics
- SASH GLASS INTERMEDIATE LOCK
- COVER, CAP WITH LOCK
- OPENING OR CLOSING REAR MASK
- DOOR POCKET
- ASHTRAY
- LUNCHBOX HOLDER BELT
- CUP HOLDER
- TOOL BOX
- GREASE PUMP HOLDER
- CAR RADIO, HANDLING
- AIR CONDITIONER, HANDLING
- CHECK BEFORE STARTING ENGINE, ADJUST
- OPERATIONS AND CHECKS AFTER STARTING ENGINE
- STOPPING ENGINE
- MACHINE OPERATION
- SHIFTING GEARS
- SHIFTING BETWEEN FORWARD AND REVERSE
- STEERING MACHINE
- WORK POSSIBLE USING BULLDOZER
- ADJUSTING POSTURE OF WORK EQUIPMENT
- PARKING MACHINE
- CHECK AFTER FINISHING WORK
- LOCKING
- TIPS FOR LONGER UNDERCARRIAGE LIFE
- TRANSPORTATION MEANS
- REMOVING CAB
- PRECAUTIONS WHEN REMOVING WORK EQUIPMENT
- LOADING, UNLOADING WORK
- METHOD OF LIFTING MACHINE
- COLD WEATHER OPERATION
- PRECAUTIONS FOR LOW TEMPERATURE
- AFTER COMPLETION OF WORK
- AFTER COLD WEATHER
- LONG-TERM STORAGE
- BEFORE STORAGE
- DURING STORAGE
- AFTER STORAGE
- TROUBLESHOOTING
- AFTER RUNNING OUT OF FUEL
- METHOD OF TOWING MACHINE
- IF BATTERY IS DISCHARGED
- OTHER TROUBLE
- HANDLING HYDRAULIC SYSTEM
- WEAR PARTS LIST
- RECOMMENDED FUEL, COOLANT, AND LUBRICANT
- USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- KOMATSU GENUINE OIL
- STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- TORQUE LIST
- PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- SAFETY CRITICAL PARTS
- MAINTENANCE SCHEDULE CHART
- SERVICE PROCEDURE
- WHEN REQUIRED
- CHECK BEFORE STARTING
- EVERY 50 HOURS SERVICE
- EVERY 250 HOURS SERVICE
- EVERY 500 HOURS SERVICE
- EVERY 1000 HOURS SERVICE
- EVERY 2000 HOURS SERVICE
- EVERY 4000 HOURS SERVICE
- EVERY 8000 HOURS SERVICE
Inside this manual
Real pages from this operation & maintenance manual (266 pages). Open the sample pages (PDF, 405 KB)
- Maintenance, page 77: EXPLANATION OF COMPONENTS
- Specifications, page 121: 5. If the oil level is below the L mark, add oil through oil filler (F) at
- Controls and operation, page 141: 3. Set the work equipment lock lever (7) to the FREE position (F).
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the D39EX-22, D39PX-22 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 266 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).