MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Komatsu D41E-6, D41P-6 Bulldozer Operation & Maintenance Manual

221 pages · Publication EEAM024200

$69.53
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
D41E-6, D41P-6
Serial coverage
D41E-6 B40694 and up, D41P-6 B40688 and up
Manual type
Operation & Maintenance Manual
Pages
221
Publication
EEAM024200
Condition
Brand new
Komatsu D41E-6, D41P-6 Bulldozer Operation & Maintenance Manual, publication EEAM024200

What's inside

From the manual's own table of contents: 69 sections, 211 entries. See sample pages (PDF, 379 KB)

FOREWORD
SAFETY INFORMATION
NOISE EMISSION LEVELS
VIBRATION LEVELS1 topic
  • Guide to Reduce Vibration Levels on Machine
INTRODUCTION
FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
NECESSARY INFORMATION
MACHINE SERIAL NO. PLATE AND POSITION
ENGINE SERIAL NO. PLATE AND POSITION
POSITION OF SERVICE METER
TABLE OF ENTER SERIAL NO. AND DISTRIBUTORN
MACHINE SERIAL PLATE
SAFETY
SAFETY LABELS
POSITIONS OF SAFETY PICTOGRAMS
GENERAL PRECAUTIONS
PRECAUTIONS FOR OPERATION
STARTING ENGINE
OPERATION
TRANSPORTATION
BATTERY
TOWING
PRECAUTIONS FOR MAINTENENCE
GENERAL VIEW
Show all 69 sections
GENERAL VIEW OF MACHINE1 topic
  • GENERAL VIEW OF CONTROLS AND GAUGES
EXPLANATION OF COMPONENTS43 topics
  • MONITOR PANEL
  • SWITCHES
  • LAMP
  • CONTROL LEVERS AND PEDALS
  • FUSE
  • ELECTRIC POWER TAKE-OUT ADAPTER
    • MACHINE EQUIPPED WITH CANOPY
    • MACHINE EQUIPPED WITH CAB
  • DOOR - OPEN LOCK
  • SASH GLASS LOCK LEVER
  • DOOR RELEASE LEVER
  • CAP, COVER WITH LOCK
    • METHOD OF OPENING AND CLOSING CAP WITH LOCK
    • METHOD OF OPENING AND CLOSING COVER WITH LOCK
  • HOT AND COOL BOX
  • DOOR POCKET
  • ASHTRAY
  • TOOL BOX
  • CAR STEREO, HANDLING
    • EXPRANATION OF COMPONENTS
    • METOD OF OPERATION
    • PRECAUTION WHEN USING
  • AIR CONDITIONER, HANDLING
    • EXPLANATION OF PARTS
    • COOLING OPERATION
    • HEATING OPERATION
    • PREVENTION METHOD OF ENTRY OF DUST
    • PRECAUTION WHEN USING AIR CONDITIONER
    • INSPECTION DURING OFF-SEASON
    • PROCEDURE FOR REPLACING RECEIVER
    • CLEANING AIR FILTER
  • CHECK BEFORE STARTING ENGINE, ADJUST
    • CHECK
    • CHECK BEFORE STARTING
    • ADJUSTMENT
    • OPERATION AND CHECK BEFORE STARTING ENGINE
  • STARTING ENGINE
    • NORMAL STARTING
    • STARTING IN COLD WEATHER
  • OPERATIONS AND CHECKS AFTER STARTING ENGINE
    • BREAKING IN THE NEW MACHINE
    • NORMAL OPERATION
    • STARTING IN COLD WEATHER
STOPPING ENGINE
CHECK AFTER STOPPING ENGINE
MACHINE OPERATION2 topics
  • MOVING MACHINE OFF
  • STOPPING MACHINE
SHIFTING GEAR
SHIFTING BETWEEN FORWARD AND REVERSE
STEERING MACHINE8 topics
  • NORMAL TURNING
  • TURNING WHILE DESCENDING A SLOPE
  • METHOD OF USING STEERING CLUTCH
  • PERMISSIBLE WATER DEPTH
  • PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS
  • PRECAUTIONS ON SLOPES
  • IT IS PROHIBITED TO KEEP THE DOOR OPEN DURING OPERATIONS
  • PRECAUTIONS FOR BLIND SPOTS CAUSED BY CAB STAY
WORK POSSIBLE USING BULLDOZER4 topics
  • DOZING
  • SMOOTHING
  • CUTTING INTO HARD OR FROZEN GROUND OR DITCHING
  • FELLING TREES, REMOVING STUMPS
PARKING MACHINE
CHECK AFTER FINISHING WORK
LOCKING
TIPS FOR LONGER UNDERCARRIAGE LIFE3 topics
  • OPERATION METHOD
  • INSPECTION AND ADJUSTMENT
  • INSPECTION AND REPAIR
TRANSPORTATION MEANS
REMOVING CAB
LOADING, UNLOADING WORK
LIFTING MACHINE
COLD WEATHER OPERATION
PRECAUTIONS FOR LOW TEMPERATURE
AFTER COMPLETION OF WORK
AFTER COLD WEATHER
STORAGE
BEFORE STORAGE
DURING STORAGE
AFTER STORAGE
TROUBLESHOOTING10 topics
  • AFTER RUNNING OUT OF FUEL
  • MACHINE TOWING METHOD
  • IF BATTERY IS DISCHARGED
    • REMOVE AND INSTALL BATTERY
    • PRECAUTIONS FOR CHARGING BATTERY
    • STARTING ENGINE WITH BOOSTER CABLE
  • OTHER TROUBLE
    • ELECTRICAL SYSTEM
    • CHASSIS
    • ENGINE
GUIDE TO MAINTENANCE
OUTLINE OF SERVICE8 topics
  • OUTLINE OF OIL, FUEL, COOLANT
    • FUEL
    • COOLANT
    • GREASE
    • CARRYING OUT KOWA (Komatsu Oil Wear Analysis)
    • STORING OIL AND FUEL
    • FILTERS
  • RELATING TO ELECTRIC SYSTEM
WEAR PARTS LIST
USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE1 topic
  • PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS
STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS1 topic
  • TORQUE LIST
PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS1 topic
  • SAFETY CRITICAL PARTS
MAINTENANCE SCHEDULE CHART8 topics
  • WHEN REQUIRED
    • CHECK BEFORE STARTING
    • EVERY 50 HOURS SERVICE
    • EVERY 250 HOURS SERVICE
    • EVERY 500 HOURS SERVICE
    • EVERY 1000 HOURS SERVICE
    • EVERY 2000 HOURS SERVICE
    • EVERY 4000 HOURS SERVICE
SERVICE PROCEDURE
WHEN REQUIRED19 topics
  • CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
  • CLEAN INSIDE OF COOLING SYSTEM
  • CHECK TRACK TENSION
  • CHECK AND TIGHTEN TRACK SHOE BOLTS
  • CHECK ELECTRICAL INTAKE AIR HEATER
  • REVERSE AND REPLACE END BITS AND CUTTING EDGES
  • CLEAN, CHECK RADIATOR FINS, HYDRAULIC OIL COOLER FINS
  • ADJUST PLAY IN CENTER BALL
  • CHECK, ADJUST AIR CONDITIONER
  • GREASE DOOR HINGE
  • CHECK DOOR LOCK STRIKER
  • REPLACE DOOR DAMPER
  • CHECK DOOR LATCH
  • CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
  • REPLACE WIPER BLADE
  • CHECK IDLER OIL LEVEL, ADD OIL
  • ADJUST IDLER CLEARANCE
  • PROCEDURE FOR BLEEDING AIR IN HYDRAULIC SYSTEM
  • PROCEDURE FOR RELEASING INTERNAL PRESSURE OF HYDRAULIC SYSTEM
CHECK BEFORE STARTING
EVERY 50 HOURS SERVICE1 topic
  • DRAIN WATER, SEDIMENT FROM FUEL TANK
EVERY 250 HOURS SERVICE7 topics
  • LUBRICATING
  • CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL
  • CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL
  • CHECK LEVEL OF BATTERY ELECTROLYTE
  • CHECK, CLEAN FUEL STRAINER
  • CHECK BRAKE PERFORMANCE
  • CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER)
EVERY 500 HOURS SERVICE2 topics
  • REPLACE FUEL FILTER CARTRIDGE
  • CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE
EVERY 1000 HOURS SERVICE10 topics
  • CHANGE OIL IN TRANSMISSION CASE, CLEAN STRAINER (POWER TRAIN STRAINER)
  • REPLACE TRANSMISSION OIL FILTER CARTRIDGE
  • CLEAN BREATHER
  • CHANGE OIL IN STEERING CLUTCH CASE
  • CHECK OIL LEVEL IN DAMPER CASE, ADD OIL
  • CHECK ALTERNATOR BELT TENSION, ADJUST
  • CHECK ENGINE VALVE CLEARANCE, ADJUST
  • CHECK ALL TIGHTENING PARTS OF TURBOCHARGER
  • CHECK PLAY OF TURBOCHARGER ROTOR
  • CHECK FOR LOOSE ROPS MOUNT BOLTS
EVERY 2000 HOURS SERVICE10 topics
  • GREASE UNIVERSAL JOINT
    • CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT
    • REPLACE HYDRAULIC TANK BREATHER ELEMENT
    • CHANGE OIL IN DAMPER CASE
    • CHANGE OIL IN FINAL DRIVE CASE
    • CHECK VIBRATION DAMPER
    • CHECK ALTERNATOR, STARTING MOTOR
    • CHECK ENGINE VALVE CLEARANCE, ADJUST
  • EVERY 4000 HOURS SERVICE
    • CHECK WATER PUMP
SPECIFICATIONS1 topic
  • PRECAUTIONS RELATED TO SAFETY
SUSPENSION SEAT1 topic
  • ADJUSTMENT
HEADREST
EQUIPPING FIRE EXTINGUISHER AND FIRST- AID KIT

Inside this manual

Real pages from this operation & maintenance manual (221 pages). Open the sample pages (PDF, 378 KB)

Sample pages from the Komatsu D41E-6, D41P-6 Bulldozer Operation & Maintenance Manual: Controls and operation, Maintenance, Specifications
  • Controls and operation, page 110: OPERATION AND CHECK BEFORE STARTING ENGINE
  • Maintenance, page 188: SERVICE PROCEDURE
  • Specifications, page 209: SPECIFICATIONS

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the D41E-6, D41P-6 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operation & Maintenance Manual EEAM024200$69.53
Other manuals for the D41E-6, D41P-6

Service manuals

Details
Details
Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 221 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Other editions and similar models

Komatsu D41E-6, D41P-6Operation & Maintenance Manual · EEAM024201 · $69.93Komatsu D41E-6, D41P-6Operation & Maintenance Manual · KEAM003400 · $69.97Komatsu D41E-6, D41P-6Operation & Maintenance Manual · KEAM003600 · $69.79Komatsu D41E-6, D41P-6Operation & Maintenance Manual · KEAM048600T · $69.83Komatsu D41E-6, D41P-6Operation & Maintenance Manual · SEAM008101 · $69.91Komatsu D41E-6, D41P-6Operation & Maintenance Manual · SEAM008102 · $69.89

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).