Komatsu D51EXi-22, D51PXi-22 Crawler Dozer Operation & Maintenance Manual

Name: Komatsu D51EXi-22, D51PXi-22 Crawler Dozer Operation & Maintenance Manual
Brand: MidWestTech
SKU: KEAM019301
Price: 69.61 USD
Availability: InStock

443 pages · Publication KEAM019301

$69.61

Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.

Models: D51EXi-22, D51PXi-22
Serial coverage: D51EXi-22 B13500 and up, D51PXi-22 B13500 and up
Manual type: Operation & Maintenance Manual
Pages: 443
Publication: KEAM019301
Condition: Brand new

Komatsu D51EXi-22, D51PXi-22 Crawler Dozer Operation & Maintenance Manual, publication KEAM019301

What's inside

From the manual's own table of contents: 551 topics. See sample pages (PDF, 495 KB)

Search the contents

BEFORE READING THIS MANUAL
SAFETY INFORMATION
INTRODUCTION
USE OF MACHINE
DIRECTIONS OF MACHINE
PRODUCT IDENTIFICATION
PRODUCT IDENTIFICATION PLATE
ENGINE SERIAL NUMBER AND EMISSION LABEL
SERIAL NUMBERS AND DEALER INFORMATION
MODEL: D51EXi/PXi-22
MACHINE FEATURES
SAFETY AND WARNING DECALS
LOCATION OF THE SAFETY DECALS
GENERAL SAFETY RULES AND PRECAUTIONS
GENERAL SAFETY RULES
UNAUTHORIZED MODIFICATIONS
GENERAL SAFETY AT JOB SITE
WORKING ON LOOSE GROUND
SAFETY FEATURES
PERSONAL PROTECTIVE EQUIPMENT
FIRE AND EXPLOSION PREVENTION
FIRE CAUSED BY FUEL OR OIL
FIRE CAUSED BY ACCUMULATION OF FLAMMABLE MATERIAL
FIRE FROM ELECTRICAL SYSTEM

Show all 551 topics

FIRE FROM HYDRAULIC LINE
WINDSHIELD WASHER FLUID
ACTION IF FIRE OCCURS
DUST HAZARDS
BLAST ZONE HAZARD
KEEP OPERATOR'S CAB CLEAN
LEAVING OPERATOR’S COMPARTMENT
PARKING BRAKE AND EQUIPMENT LOCKS
PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
WHEN STANDING UP FROM OPERATOR'S SEAT
WHEN LEAVING MACHINE
MOUNTING AND DISMOUNTING
CRUSH OR PINCH POINT DANGERS
FIRE EXTINGUISHER AND FIRST AID KIT
INSIDE OPERATOR’S COMPARTMENT
PRECAUTIONS WHEN USING ROPS
PRECAUTIONS FOR OPERATION
IN COLD AREAS
PRECAUTIONS FOR BLADE AUTOMATIC CONTROL
PRECAUTIONS BEFORE STARTING OPERATIONS
PRE-OPERATIONAL CHECKS
STARTING YOUR WORK OPERATIONS
WORK SITE HAZARDS
AVOIDING DANGEROUS SITUATIONS
HIGH VOLTAGE LINES
RULES FOR ROAD TRAVEL
PRECAUTIONS WHEN TRAVELING
USING BRAKES
RULES FOR TRAVELING IN REVERSE
TRAVELING ON ICY OR SNOW-COVERED SURFACES
WORKING ON LOOSE OR UNSTABLE GROUND
TRAVEL ON SLOPES
PARKING THE MACHINE
PRECAUTIONS DURING MAINTENANCE OPERATIONS
WARNING TAGS
EQUIPMENT STORAGE
WORKING UNDER THE MACHINE
USING DROP LAMPS
KEEPING THE MACHINE CLEAN
KEEP WORKPLACE CLEAN AND TIDY
APPOINT LEADER WHEN WORKING WITH OTHERS
STOP ENGINE BEFORE CARRYING OUT MAINTENANCE
RUNNING THE MACHINE DURING MAINTENANCE
RULES FOR REFUELING THE MACHINE
COOLING SYSTEM PRECAUTIONS
WORK UNDER THE MACHINE
PRECAUTIONS WHEN USING HAMMER
TURN THE BATTERY DISCONNECT SWITCH TO THE OFF POSITION
REPAIR WELDING
ENGINE SYSTEM HIGH VOLTAGE
BATTERY PRECAUTIONS
STARTING THE MACHINE
HIGH PRESSURE HOSES
HANDLING HIGH-PRESSURE HOSES
PRECAUTION FOR HIGH FUEL PRESSURE
HIGH TEMPERATURE AREAS
ROTATING PARTS
DISPOSAL OF WASTE MATERIALS
MERCURY CONTAINING COMPONENT(S)
USING HIGH-PRESSURE GREASE TO ADJUST TRACK TENSION
DO NOT DISASSEMBLE RECOIL SPRING
ACCUMULATOR AND GAS SPRING
CRITICAL PARTS
PRECAUTIONS FOR CHECK AND MAINTENANCE
PRECAUTIONS FOR iB GNSS ANTENNA
TRANSPORTING THE MACHINE
LOADING AND SECURING THE MACHINE
TOWING THE MACHINE
GENERAL VIEWS
VIEW OF MACHINE
VIEW OF CONTROLS AND GAUGES
MACHINE MONITOR SYSTEM
MONITOR LAYOUT
BASIC OPERATION OF MONITOR PANEL
CHECK MONITOR SYSTEM
MONITOR CHECK ITEMS
EMERGENCY ALERTS
ENGINE OIL PRESSURE CAUTION LAMP
ENGINE COOLANT TEMPERATURE CAUTION LAMP
HYDRAULIC OIL TEMPERATURE CAUTION LAMP
HST CHARGE PRESSURE CAUTION LAMP
CHARGE FILTER CLOG CAUTION LAMP
WARNING ALERTS
BATTERY CHARGE CAUTION LAMP
AIR CLEANER CLOGGING CAUTION LAMP
WATER IN FUEL LAMP
MAINTENANCE CAUTION LAMP
CONSOLE CONTROL SWITCHES
SWITCH LAYOUT VIEW
LAMP SWITCH
BUZZER CANCEL SWITCH
INFORMATION SWITCH
HEATER SWITCH
IGNITION SWITCH
HORN SWITCH
WIPER SWITCH
CAB LAMP SWITCH
CIGARETTE LIGHTER
ACCESSORY SOCKET
METER DISPLAY
ENGINE COOLANT TEMPERATURE GAUGE
HYDRAULIC OIL TEMPERATURE GAUGE
DISPLAY PANEL (A)
FUEL LEVEL GAUGE
REVERSE TRAVEL SPEED SET SWITCH
SHIFT MODE SWITCH
ENGINE INTAKE AIR PRE-HEAT PILOT LAMP
DISPLAY PANEL (B)
FAN ROTATION SELECTOR SWITCH
FLOAT MODE MONITOR
WARNING LAMP VIEW
WARNING LAMP (1)
USING FAILURE CODE DISPLAY
USING MAINTENANCE MODE
METHOD OF SELECTING EACH MODE
USING OIL AND FILTER MAINTENANCE MODE
USING ADJUSTMENT MODE
CONTROL LEVERS AND PEDALS
LEVER LAYOUT VIEW
LOCK LEVERS
JOYSTICK (STEERING, DIRECTIONAL AND GEAR
SHIFT LEVER)
BLADE CONTROL LEVER
ANGLING CONTROL
WORK EQUIPMENT LOCK LEVER
FUEL CONTROL DIAL
DECELERATOR PEDAL
BRAKE PEDAL
PARKING BRAKE LEVER
DOOR AND WINDOW SYSTEM
DOOR - OPEN LOCK
SASH GLASS INTERMEDIATE LOCK
SAFETY LOCKS AND SECURITY
DOOR LOCK
CAP, COVER WITH LOCK
METHOD OF OPENING OR CLOSING HYDRAULIC TANK CAP
OPEN AND CLOSE FUEL FILLER PORT CAP
OPEN
CLOSE
METHOD OF OPENING AND CLOSING COVER WITH LOCK
TO OPEN THE COVER (LOCKED COVER)
TO LOCK THE COVER
LOCKABLE AREAS
SEAT POCKET
ADDITIONAL FEATURES AND ACCESSORIES
AIR CONDITIONER AND FEET HEATER
GENERAL DESCRIPTION OF CONTROL PANEL
MODE SELECTOR SWITCH
BLOWER SPEED SELECTOR SWITCH
TEMPERATURE CONTROL SWITCH
PRECAUTIONS WHEN USING AIR CONDITIONER
FEET HEATER
RADIO
EXPLANATION OF FEATURES
POWER SWITCH/VOLUME
AUTO-STORE/PRESET SCAN BUTTON
BASS CONTROL KNOB
TREBLE CONTROL KNOB
LOUDNESS BUTTON
TIME/RADIO DISPLAY SELECTOR BUTTON
TAPE EJECT BUTTON
CASSETTE DOOR
FAST FORWARD, REWIND BUTTONS
PRESET BUTTONS
METAL TAPE BUTTON
MANUAL TUNING BUTTONS
SEEK TUNING BUTTONS
BAND SELECTOR BUTTON
METHOD OF OPERATION
LISTENING TO RADIO
LISTENING TO A CASSETTE TAPE
REVERSING TAPE
PRECAUTION WHEN USING
ASHTRAY
LUNCH BOX HOLDER STRAP
CUP HOLDER
TOOL BOX
GREASE PUMP HOLDER
ELECTRICAL POWER ADAPTER
BATTERY DISCONNECT SWITCH
FUSES
FUSE CAPACITIES AND CIRCUIT NAMES
PRECAUTIONS BEFORE STARTING WORK OPERATIONS
WALK-AROUND CHECKS
CHECKS BEFORE STARTING
ADJUSTMENTS BEFORE OPERATION
ADJUST ARMREST
FASTENING AND REMOVING SEAT BELT
ADJUSTING MIRROR
OPERATIONS AND CHECKS BEFORE
STARTING ENGINE
STARTING THE ENGINE
NORMAL OR COLD START PROCEDURES
COLD WEATHER STARTS
OPERATIONS AND CHECKS AFTER STARTING ENGINE
BREAKING IN THE MACHINE
WARMING UP ENGINE
STARTING IN COLD WEATHER
STOPPING THE ENGINE
MOVING, STEERING, STOPPING AND PARKING THE MACHINE
PREPARATIONS FOR MOVING THE MACHINE
MOVING MACHINE FORWARD OR REVERSE
CHANGING SPEED RANGES
STEERING THE MACHINE
NORMAL TURN
MAKING A LEFT OR RIGHT TURN
MAKING A PIVOT TURN
TURNING WHILE DESCENDING A SLOPE
COUNTER-ROTATION TURN
STOPPING THE MACHINE
PARKING MACHINE
CHECK AFTER FINISHING WORK
CHECK AFTER SHUTTING OFF ENGINE
OPERATING THE MACHINE
PAY ATTENTION TO GAUGES
PERMISSIBLE WATER DEPTH
METHOD OF USING BRAKES
WHEN TRAVELING UP OR DOWN HILLS
PRECAUTIONS ON SLOPES
BE AWARE OF FUEL LEVEL
PRECAUTIONS WHEN ENGINE STOPS ON A SLOPES
ALWAYS KEEP THE DOORS CLOSED DURING OPERATIONS
DO NOT MODIFY THE CAB GLASS IN ANY WAY
PRECAUTIONS FOR BLIND SPOTS CAUSED BY CAB STAYS
CUTTING A GRADE
DOZING
BACK GRADING A SURFACE
CUTTING HARD OR FROZEN GROUND OR DITCHING
FELLING TREES, REMOVING STUMPS
SIDE-CUTTING OPERATIONS
UNDERCARRIAGE CARE
OPERATION METHOD
INSPECTION AND ADJUSTMENT
INSPECTION AND REPAIR
MEASURING LINK PITCH
MEASURING HEIGHT OF GROUSER
MEASURING OUTSIDE DIAMETER OF TRACK ROLLER
LOADING OR UNLOADING A TRAILER
PRE-TRANSPORTATION PROCEDURES
SECURING MACHINE
UNLOADING THE MACHINE
LIFTING THE MACHINE
FOR BASE MACHINE
FOR MACHINE EQUIPPED WITH RIPPER
COLD WEATHER OPERATION
FUEL AND LUBRICANTS
COOLING SYSTEM COOLANT
BATTERY
PRECAUTIONS ON PARTICULAR JOBSITES
DISCHARGED BATTERY
REMOVE AND INSTALL BATTERY
BATTERY CHARGES
STARTING ENGINE WITH BOOSTER CABLES
GENERAL TROUBLESHOOTING
AFTER RUNNING OUT OF FUEL
WHEN IT IS POSSIBLE TO START ENGINE
WHEN ENGINE DOES NOT START
RELEASING THE BRAKES
CONNECTING PUMP TO MACHINE
AFTER TOWING MACHINE
ELECTRICAL SYSTEM PROBLEMS
MONITOR PANEL
CHASSIS PROBLEMS
ENGINE PROBLEMS
LONG TERM STORAGE
BEFORE STORAGE
DURING STORAGE
AFTER STORAGE
MACHINES EQUIPPED WITH KOMTRAX SYSTEMS
BASIC PRECAUTIONS
MAINTENANCE INFORMATION
SERVICE METER READING
KOMATSU GENUINE REPLACEMENT PARTS
KOMATSU GENUINE LUBRICANTS
FRESH AND CLEAN LUBRICANTS
CHECK DRAINED OIL AND USED FILTER
FUEL STRAINER
WELDING INSTRUCTIONS
DO NOT DROP THINGS INSIDE MACHINE
DUSTY JOBSITE
AVOID MIXING LUBRICANTS
HYDRAULIC SYSTEM - AIR BLEEDING
HYDRAULIC HOSE INSTALLATION
CHECKS AFTER INSPECTION AND MAINTENANCE WORKS
LOCKING THE INSPECTION COVER
OPENING OR CLOSING RADIATOR GRILL
LUBRICANTS, COOLANT AND FILTERS
OUTLINE OF SERVICE
HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
FUEL
GREASE
CARRYING OUT KOWA (KOMATSU OIL WEAR ANALYSIS)
OIL AND FUEL STORAGE
FILTERS
ELECTRIC SYSTEM MAINTENANCE
HANDLING HYDRAULIC SYSTEM
WEAR PARTS LIST
RECOMMENDED FUEL, COOLANT, AND LUBRICANT
RECOMMENDED PRODUCTS OTHER THAN KOMATSU GENUINE OILS
LUBRICANT AND COOLANT SUPPLIER RECOMMENDATIONS
TIGHTENING TORQUE SPECIFICATIONS
PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
SAFETY RELATED CRITICAL PARTS
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE CHART
WHEN REQUIRED
CLEANING THE MACHINE
CLEAN TIPS
CLEANING THROUGH ACCESS AREAS
CHECK ELECTRICAL INTAKE AIR HEATER
CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
CLEANING OR REPLACING OUTER ELEMENT
REPLACING INNER ELEMENT
CLEAN COOLING SYSTEM
FLUSHING THE COOLING SYSTEM
TRACK SYSTEM MAINTENANCE
CHECK AND TIGHTEN TRACK SHOE BOLTS
CHECKING AND ADJUSTING TRACK TENSION
IDLER GUIDE CLEARANCE
REVERSING OR REPLACING END BITS AND CUTTING EDGES
CHECKING IDLER OIL LEVEL
ADJUST PLAY IN CENTER BALL
ADJUST PLAY IN PITCH BALL
MECHANICAL PITCH ROD (ADJUSTABLE)
ADJUSTMENT
SPECIFICATIONS
ADJUSTMENT OF PITCH ANGLE
DOOR HINGES
CHECKING WINDOW WASHER FLUID LEVEL
MIXTURE RATIO OF PURE WASHER FLUID AND WATER
CHECKING AIR CONDITIONER
CHECK LEVEL OF REFRIGERANT
OPERATING AIR CONDITIONER OFF-SEASON
REPLACE WIPER BLADE
REPLACEMENT
RELEASING INTERNAL PRESSURE ON HYDRAULIC SYSTEM
BLEEDING AIR FROM HYDRAULIC SYSTEM
BLEEDING AIR FROM PUMP
BLEEDING AIR FROM CYLINDERS
CLEAN, CHECK RADIATOR FINS
CLEANING BY ROTATING COOLING FAN IN REVERSE DIRECTION
CLEANING WITH COMPRESSED AIR
CLEAN HYDRAULIC TANK BREATHER
CLEAN FUEL TANK BREATHER
INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
REPLACE FUEL PRE-FILTER CARTRIDGE
INITIAL 500 HOURS SERVICE (ONLY AFTER THE FIRST 500 HOURS)
REPLACE MAIN FUEL FILTER CARTRIDGE
EVERY 50 HOURS MAINTENANCE
LUBRICATE
DRAINING SEDIMENT FROM FUEL TANK
EVERY 250 HOURS MAINTENANCE
CHECK OIL LEVEL IN FINAL DRIVE CASE
CHECKING FINAL DRIVE OIL LEVEL
LUBRICATING
CHECK LEVEL OF BATTERY ELECTROLYTE
CHECK BRAKE PERFORMANCE
AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER)
EVERY 500 HOURS MAINTENANCE
EVERY 1000 HOURS MAINTENANCE
CHANGE OIL IN FINAL DRIVE CASE
CHECK ALTERNATOR BELT TENSION
CHECK FOR LOOSE ROPS MOUNT BOLTS
REPLACE PRE AND MAIN FUEL FILTER CARTRIDGES
REPLACE BREATHER ELEMENT IN FUEL TANK
REPLACE BREATHER ELEMENT IN HYDRAULIC TANK
EVERY 2000 HOURS MAINTENANCE
CHANGE OIL IN HYDRAULIC TANK, REPLACE OIL FILTER CARTRIDGE
CHECK ALTERNATOR, STARTING MOTOR
CHECK ENGINE VALVE CLEARANCE, ADJUST
CHECK CHARGE PRESSURE ACCUMULATOR (CONTROL CIRCUIT)
FUNCTION OF ACCUMULATOR
CHECKING FUNCTION OF ACCUMULATOR
RELEASING PRESSURE IN HYDRAULIC CIRCUIT
CHECKING PIVOT SHAFT OIL LEVEL
EVERY 4000 HOURS MAINTENANCE
CHECK WATER PUMP
CHECK VIBRATION DAMPER
REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT)
CHECK FOR MISSING FUEL SPRAY CAP, HARDENING OF RUBBER
OPERATING WEIGHT
MACHINE DIMENSIONS AND WEIGHTS
MACHINE SYSTEMS SPECIFICATIONS
ENGINE
TRANSMISSION
STEERING SYSTEM
SERVICE REFILL CAPACITIES
UNDERCARRIAGE
AUTHORIZED OPTIONAL EQUIPMENT
AIR SUSPENSION SEAT
FORESTRY KIT
CABIN POLYCARBONATE PANEL FRONT
EQUIPPING FIRE EXTINGUISHER AND FIRST-AID KIT
HANDLING HYDRAULIC RIPPER
GENERAL VIEW
EXPLANATION OF COMPONENTS
RIPPER CONTROL LEVER
OPERATION
CHECK BEFORE STARTING ENGINE, ADJUST
PRECAUTIONS WHEN OPERATING
ADJUSTING POSTURE OF WORK EQUIPMENT
REPLACEMENT OF POINT
TROUBLESHOOTING
OTHER TROUBLE
MAINTENANCE
EVERY 250 HOURS SERVICE
GENERAL VIEW OF MACHINE
RELATED DEVICES LOCATED OUTSIDE OF MACHINE
GENERAL VIEW OF CONTROLS AND GAUGES
iB MONITOR
AUTO/MANUAL SWITCH
WHEN TURNING THE AUTOMATIC CONTROL OF BLADE ON
WHEN TURNING THE AUTOMATIC CONTROL OF BLADE OFF
TURNED OFF
iB GNSS ANTENNA
MACHINE OPERATIONS AND CONTROLS
CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
RESET CYLINDER STROKE END
RESET STROKE END OF LIFT CYLINDER
RESET STROKE END OF TILT CYLINDER
RESET STROKE END OF ANGLE CYLINDER
STOPPING ENGINE
PREPARATIONS FOR BLADE AUTOMATIC CONTROL
PREPARATIONS CONFORM TO EACH SITE CONDITION
PREPARATIONS IN CONFORMITY TO EACH SITE CONDITION
SET BASE STATION
CONFIGURE RADIOS
PROJECT FILE SETTING
INPUT PITCHING ROD LENGTH
INPUT WEAR AMOUNT OF BLADE EDGE AND TRACK SHOE
SET BASE POINT FOR CHECKING BLADE ELEVATION
CHECK BLADE ELEVATION, ADJUST
HANDLING AUTOMATIC BLADE CONTROL
ACTIVATE AUTOMATIC BLADE CONTROL
WHEN AUTOMATIC BLADE CONTROL IS ACTIVATED
DEACTIVATE AUTOMATIC BLADE CONTROL
MODE SETTING
DOZING MODE SETTING
BLADE LOAD MODE SETTING
SMOOTH START
RECOMMENDED APPLICATIONS
RECOMMENDED APPLICATIONS AND MODES
DIGGING WORK
NATURAL GROUND SCRAPING OPERATION
CUTTING AND CARRY OPERATION
SPREADING OPERATION
RAISING GROUND LEVEL OPERATION (PUSHING UP SOILS)
PUSH AND TURN OPERATION
NATURAL GROUND SIDE-CUTTING OPERATION
LEVELING WORK
FINISHING OPERATION OF BANK SOIL
SUPER ELEVATION OPERATION
TRANSPORTATION
PRECAUTIONS WHEN INSTALLING WORK EQUIPMENT
LONG-TERM STORAGE
TROUBLES AND ACTIONS
KEYBOARD FUNCTIONS
ALPHANUMERIC KEYBOARD
NUMERIC KEYBOARD
MAIN MENU
FILE MENU OPTIONS
COPYING AND SETTING PROJECT FILES
CREATING A PROJECT FILE
IMPORTING PROJECT FILES
EXPORTING PROJECT FILES
CONTROL POINT FILES
IMPORTING CONTROL POINT FILES
LAYERS
IMPORTING LAYERS
POINTS
SURFACE FILES
SURFACE FILE TYPES
IMPORTING SURFACE FILES
CREATING FLAT OR SLOPING SURFACE FILES
CREATING CROWN ROAD SURFACE FILES
CREATING TRIANGULATED SURFACES FROM ATOPO SURVEY FILE
SELECTING AN ACTIVE SURFACE FILE
SELECTING AN ACTIVE ALIGNMENT FILE
SETTING AN ACTIVE AS-BUILT VIEW
EXIT 3DMC
CONTROL MENU OPTIONS
SETTING MACHINE SETUP
SETTING AS-BUILT CONTROL OPTIONS
SETTING BLADE CONTROL
AUTOMATIC BEST-FIT BLADE CONTROL
SETTING STEER INDICATION OPTIONS
BLADE WEAR ADJUSTMENT
SETTING DOZING CONTROL
BLADE HEIGHT ADJUSTMENT
BLADE CALIBRATION
TOOLS MENU OPTIONS
CONFIGURING THE RADIO
CHECKING THE BLADE'S POSITION
NAVIGATING POINTS
NAVIGATING TO POINTS USING THE NAVIGATE TO POINT CONTEXT MENU
PERFORMING TOPOGRAPHIC SURVEYS
USING SUPERVISOR MODE
CHANGING THE PASSWORD
LOCKING MENUS, BUTTONS AND SCREEN ITEMS
VIEW MENU OPTIONS
CHANGING MAIN WINDOW DISPLAY VIEWS
CHANGING LEFT WINDOW DISPLAY
CHANGING THE GRADE INDICATOR SCALE
CHANGING THE RIGHT WINDOW DISPLAY
CHANGING THE LOWER WINDOW DISPLAY
DISPLAY OPTIONS
WORKING SURFACE DISPLAY OPTIONS
ALIGNMENT DISPLAY OPTIONS
AS-BUILT SURFACE DISPLAY OPTIONS
POINTS DISPLAY OPTIONS
SHORTCUTS DISPLAY OPTIONS
SHORTCUT FUNCTIONS ON THE MAIN SCREEN
PANNING OF THE MAIN MAP VIEW
EXTENDED STATUS TEXT OPTIONS IN PLAN/PROFILE/SECTION VIEWS
BACKGROUND COLOR DISPLAY OPTIONS
UNITS DISPLAY OPTIONS
VIEWING 3DMC INFORMATION
MAIN SCREEN DISPLAY OPTIONS
ELEVATION CONTROL KEY
SLOPE CONTROL KEY
VIEWING GPS INFORMATION
ADJUSTING CUT/FILL OFFSETS
CHANGING THE CUT/FILL OFFSETS USING THE SET-POINTS POP-UP MENU
STEERING/GRADING TO POLYLINE
STEERING TO POLYLINE
GRADING TO POLYLINE
ISOLATE SURFACE

Inside this manual

Real pages from this operation & maintenance manual (443 pages). Open the sample pages (PDF, 494 KB)

Sample pages from the Komatsu D51EXi-22, D51PXi-22 Crawler Dozer Operation & Maintenance Manual: Specifications, Maintenance, Controls and operation, Color page, Color page

Specifications, page 242: MAINTENANCE
Maintenance, page 260: MAINTENANCE
Controls and operation, page 326: IB OPERATION
Color page, page 424: HANDLING IB MONITOR
Color page, page 399: HANDLING IB MONITOR

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the D51EXi-22, D51PXi-22 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operation & Maintenance Manual KEAM019301$69.61

Service manuals

Service Manual KEBM028602 · 1,589 pagesCovers D51EXi-22, D51PXi-22Serial: B13500 and up$159.57Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 443 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Binder not included

Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).