MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Komatsu D65EX-15E0, D65PX-15E0 Bulldozer Operation & Maintenance Manual

277 pages · Publication EEAM024400

$69.71
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
D65EX-15E0, D65PX-15E0
Serial coverage
D65EX-15E0 69001 and up, D65PX-15E0 69001 and up
Manual type
Operation & Maintenance Manual
Pages
277
Publication
EEAM024400
Condition
Brand new
Komatsu D65EX-15E0, D65PX-15E0 Bulldozer Operation & Maintenance Manual, publication EEAM024400

What's inside

From the manual's own table of contents: 73 sections, 250 entries. See sample pages (PDF, 411 KB)

BEFORE READING THIS MANUAL
IMPORTANT SAFETY INFORMATION3 topics
  • Noise emission levels
  • Vibration levels
    • Guide to Reduce Vibration Levels on Machine
INTENDED USE6 topics
  • USE OF MACHINE
  • GENERAL VIEW AND DIRECTIONS OF MACHINE
  • VISIBILITY FROM OPERATOR'S SEAT
    • PROXIMITY VISIBILITY
    • 12M CIRCUMFERENCE VISIBILITY
  • BREAKING-IN THE NEW MACHINE
LOCATION OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR6 topics
  • PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
  • ENGINE SERIAL NO. PLATE POSITION
  • ADDITIONAL EPA NAMEPLATE
  • SERVICE METER POSITION
  • TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
  • MACHINE SERIAL NUMBER PLATE
SAFETY LABELS2 topics
  • POSITION FOR ATTACHING SAFETY LABELS
  • SAFETY LABELS
PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
PRECAUTIONS DURING OPERATION
PRECAUTIONS FOR MAINTENANCE
PRECAUTIONS FOR MACHINE
GENERAL VIEW1 topic
  • GENERAL VIEW OF MACHINE
GENERAL VIEW OF CONTROLS AND GAUGES
EXPLANATION OF COMPONENTS
FRONT PANEL7 topics
  • CHECK MONITOR SYSTEM
  • EMERGENCY CAUTION ITEMS
  • CAUTION ITEMS
  • METER GROUP
  • LAMPS
  • SWITCHES
  • METHOD OF USING MAINTENANCE MODE
SWITCHES
CONTROL LEVERS AND PEDALS
CIRCUIT BREAKER
FUSE
FUSIBLE LINK
ELECTRIC POWER TAKE-OUT ADAPTER2 topics
  • MACHINE EQUIPPED WITH CAB
  • MACHINE EQUIPPED WITH ROPS CANOPY
DOOR - OPEN LOCK
SASH GLASS INTERMEDIATE LOCK
DOOR POCKET
OPENING AND CLOSING ENGINE SIDE COVER
ASHTRAY
Show all 73 sections
CUP HOLDER
TOOL BOX
SHOVEL HOLDER
AIR CONDITIONER, HANDLING8 topics
  • GENERAL LOCATIONS AND FUNCTION OF CONTROL PANEL
  • METHOD OF OPERATION
  • PRECAUTIONS WHEN USING
  • SET SO THAT COLD AIR DOES NOT DIRECTLY BLOW ONTO THE GLASS SURFACE
  • INSPECTION DURING OFF-SEASON
  • PROCEDURE FOR REPLACING RECEIVER
  • CHECK COMPRESSOR BELT TENSION AND REFRIGERANT (GAS) LEVEL
  • CLEANING AIR FILTER
OPERATION
CHECK BEFORE STARTING ENGINE, ADJUST4 topics
  • CHECK
  • CHECK BEFORE STARTING
  • ADJUSTMENT
  • OPERATION AND CHECK BEFORE STARTING ENGINE
STARTING ENGINE2 topics
  • NORMAL STARTING
  • STARTING IN COLD WEATHER
OPERATIONS AND CHECKS AFTER STARTING ENGINE41 topics
  • WARMING UP OPERATIONS
    • STARTING IN COLD WEATHER
  • STOPPING ENGINE
  • MACHINE OPERATION
    • MOVING MACHINE
    • STOPPING MACHINE
  • SHIFTING GEARS
    • GEARSHIFTING OPERATION
    • GEARSHIFTING OPERATION USING PRESET MODE FUNCTION
    • AUTO DOWN SHIFT OPERATION
  • SHIFTING BETWEEN FORWARD AND REVERSE
  • STEERING MACHINE
    • NORMAL TURNING
  • PRECAUTIONS FOR OPERATION
    • PAY ATTENTION TO GAUGES
    • PERMISSIBLE WATER DEPTH
    • PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS
    • PRECAUTIONS ON SLOPES
    • METHOD OF USING BRAKES
    • IT IS PROHIBITED TO KEEP THE DOOR OPEN DURING OPERATIONS
    • PRECAUTIONS FOR BLIND SPOTS CAUSED BY CAB AND ROPS STRUCTURES
  • WORK POSSIBLE USING BULLDOZER
    • DOZING
    • SMOOTHING
    • CUTTING INTO HARD OR FROZEN GROUND OR DITCHING
    • FELLING TREES, REMOVING STUMPS
  • ADJUSTING POSTURE OF WORK EQUIPMENT
    • ADJUST ANGLE OF BLADE EDGE
    • ADJUSTING SHIMS IN ASSEMBLING WORK EQUIPMENT
    • ADJUSTING TENSION OF CENTER BRACE
    • ADJUST AMOUNT OF TILT
    • METHOD OF ANGLING BLADE
  • PARKING MACHINE
  • CHECK AFTER FINISHING WORK
    • BEFORE STOPPING ENGINE
    • AFTER STOPPING ENGINE
  • LOCKING
  • TIPS FOR LONGER UNDERCARRIAGE LIFE
    • OPERATION METHOD
    • INSPECTION AND ADJUSTMENT
    • INSPECTION AND REPAIR
TRANSPORTATION4 topics
  • TRANSPORTATION MEANS
  • REMOVING CAB
  • PRECAUTIONS WHEN REMOVING WORK EQUIPMENT
  • PRECAUTIONS WHEN REMOVING ROPS
LOADING, UNLOADING WORK
LIFTING MACHINE
TRAVELING ON ROADS
COLD WEATHER OPERATION
PRECAUTIONS FOR LOW TEMPERATURE
AFTER COMPLETION OF WORK
AFTER COLD WEATHER
STORAGE
BEFORE STORAGE
DURING STORAGE
AFTER STORAGE
TROUBLESHOOTING
AFTER RUNNING OUT OF FUEL1 topic
  • PROCEDURE FOR BLEEDING AIR
METHOD OF TOWING MACHINE
IF BATTERY IS DISCHARGED3 topics
  • REMOVE AND INSTALL BATTERY
  • PRECAUTIONS FOR BATTERY CHARGING
  • STARTING ENGINE WITH BOOSTER CABLE
OTHER TROUBLE4 topics
  • ELECTRICAL SYSTEM
  • MONITOR PANEL
  • CHASSIS
  • ENGINE
GUIDE TO MAINTENANCE
OUTLINE OF SERVICE
HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC6 topics
  • FUEL
  • COOLANT AND WATER FOR DILUTION
  • GREASE
  • CARRYING OUT KOWA (Komatsu Oil Wear Analysis)
  • STORING OIL AND FUEL
  • FILTERS
RELATING TO ELECTRIC SYSTEM
HANDLING HYDRAULIC SYSTEM
WEAR PARTS LIST
RECOMMENDED FUEL, COOLANT, AND LUBRICANT2 topics
  • USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
  • GENUINE OIL
STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS1 topic
  • TORQUE LIST
PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS1 topic
  • SAFETY CRITICAL PARTS
MAINTENANCE SCHEDULE CHART9 topics
  • WHEN REQUIRED
    • CHECK BEFORE STARTING
    • EVERY 50 HOURS SERVICE
    • EVERY 250 HOURS SERVICE
    • EVERY 500 HOURS SERVICE
    • EVERY 1000 HOURS SERVICE
    • EVERY 2000 HOURS SERVICE
    • EVERY 4000 HOURS SERVICE
    • EVERY 8000 HOURS SERVICE
SERVICE PROCEDURE30 topics
  • WHEN REQUIRED
    • CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
    • CLEAN INSIDE OF COOLING SYSTEM
    • CHECK TRACK SHOE TENSION, ADJUST
    • CHECK AND TIGHTEN TRACK SHOE BOLTS
    • REVERSE AND REPLACE END BITS AND CUTTING EDGES
    • COOLER
    • CHECK, ADJUST AIR CONDITIONER
    • GREASE DOOR HINGE
    • CHECK DOOR LOCK STRIKER
    • REPLACE DOOR DAMPER
    • CHECK DOOR LATCH
    • CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
    • REPLACE WIPER BLADE
    • CHECK IDLER OIL LEVEL, ADD OIL
    • ADJUST IDLER CLEARANCE
    • LUBRICATING UNIVERSAL JOINT
    • PROCEDURE FOR BLEEDING AIR IN HYDRAULIC SYSTEM
  • EVERY 50 HOURS SERVICE
    • DRAIN WATER, SEDIMENT FROM FUEL TANK
  • EVERY 250 HOURS SERVICE
    • LUBRICATING
    • GREASE EQUALIZER BAR SIDE PIN
    • GREASE EQUALIZER BAR CENTER PIN
  • CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL
  • CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL
  • CHECK LEVEL OF BATTERY ELECTROLYTE
  • CHECK, CLEAN ADDITIONAL FUEL STRAINER
  • CHECK BRAKE PERFORMANCE
  • CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER)
EVERY 500 HOURS SERVICE3 topics
  • CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE
  • REPLACE POWER TRAIN OIL FILTER ELEMENT
  • REPLACE FUEL PRE-FILTER CARTRIDGE
EVERY 1000 HOURS SERVICE8 topics
  • REPLACE FUEL MAIN FILTER CARTRIDGE
  • SCAVENGING PUMP STRAINER)
  • CHECK OIL LEVEL IN DAMPER CASE, ADD OIL
  • CHANGE OIL IN FINAL DRIVE CASE
  • CLEAN BREATHER
  • REPLACE CORROSION RESISTOR CARTRIDGE
  • CHECK FOR LOOSE ROPS MOUNT BOLTS
  • INSPECTION OF AFTER-COOLER CIRCUIT FOR LOOSENED BOLTS AND NUTS
EVERY 2000 HOURS SERVICE6 topics
  • CHANGE OIL IN HYDRAULIC TANK, REPLACE OIL FILTER ELEMENT
  • REPLACE HYDRAULIC TANK BREATHER ELEMENT
  • CIRCUIT)
  • CHANGE OIL IN DAMPER CASE
  • CHECK VIBRATION DAMPER
  • CHECK ENGINE VALVE CLEARANCE, ADJUST
EVERY 4000 HOURS SERVICE4 topics
  • REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT)
  • CHECK WATER PUMP
  • CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER
  • CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER
EVERY 8000 HOURS SERVICE2 topics
  • REPLACE HIGH-PRESSURE PIPING CLAMP
  • REPLACE FUEL SPLAY PREVENTION CAPS
SPECIFICATIONS
GENERAL PRECAUTIONS
PRECAUTIONS RELATED TO SAFETY
HANDLING HYDRAULIC RIPPER11 topics
  • GENERAL VIEW
  • EXPLANATION OF COMPONENTS
  • OPERATION
    • CHECK BEFORE STARTING ENGINE, ADJUST
    • PRECAUTIONS WHEN OPERATING
    • ADJUSTING POSTURE OF WORK EQUIPMENT
  • TROUBLESHOOTING
    • OTHER TROUBLE
  • MAINTENANCE
    • EVERY 250 HOURS SERVICE
  • SPECIFICATIONS
AIR SUSPENSION SEAT
DELUXE SEAT
HEADREST
EQUIPPING FIRE EXTINGUISHER AND FIRST-AID KIT

Inside this manual

Real pages from this operation & maintenance manual (277 pages). Open the sample pages (PDF, 411 KB)

Sample pages from the Komatsu D65EX-15E0, D65PX-15E0 Bulldozer Operation & Maintenance Manual: Controls and operation, Specifications, Maintenance
  • Controls and operation, page 58: GENERAL VIEW
  • Specifications, page 98: EXPLANATION OF COMPONENTS
  • Maintenance, page 230: SERVICE PROCEDURE

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the D65EX-15E0, D65PX-15E0 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operation & Maintenance Manual EEAM024400$69.71
Other manuals for the D65EX-15E0, D65PX-15E0

Service manuals

Details
Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 277 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Other editions and similar models

Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0Operation & Maintenance Manual · TEN00103-06 · $69.73Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0Operation & Maintenance Manual · TEN00276-02 · $69.87Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0Operation & Maintenance Manual · TEN00394-00 · $69.85

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).