Komatsu Galeo PC300-7, PC300LC-7, PC350-7, PC350LC-7 Hydraulic Excavator Operation & Maintenance Manual
364 pages · Publication TEN00056-02
Added to your cart. View cart
- Models
- Galeo PC300-7, PC300LC-7, PC350-7, PC350LC-7
- Serial coverage
- PC300 45001 and up, PC300LC 45001 and up, PC350 25001 and up, PC350LC 25001 and up
- Manual type
- Operation & Maintenance Manual
- Pages
- 364
- Publication
- TEN00056-02
- Condition
- Brand new
What's inside
From the manual's own table of contents: 190 topics. See sample pages (PDF, 396 KB)
- FOREWORD
- SAFETY INFORMATION
- INTRODUCTION
- DIRECTIONS OF MACHINE
- BREAKING-IN OPERATION
- PRODUCT INFORMATION
- PRODUCT IDENTIFICATION NUMBER (PIN), MACHINE SERIAL NO. PLATE
- ENGINE SERIAL NUMBER PLATE AND ITS LOCATION
- SERVICE METER LOCATION
- YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
- POSITION FOR ATTACHING SAFETY LABELS
- SAFETY LABELS
- SAFETY MACHINE OPERATION
- STARTING ENGINE
- OPERATION
- TRANSPORTATION
- BATTERY
- TOWING
- LIFTING OBJECTS WITH BUCKET
- SAFETY MAINTENANCE INFORMATION
- GENERAL VIEW
- GENERAL VIEW OF MACHINE
- GENERAL VIEW CONTROLS AND GAUGES
- EXPLANATION OF COMPONENTS
Show all 190 topics
- MACHINE MONITOR
- BASIC CHECK ITEMS
- SWITCHES
- CONTROL LEVERS, PEDALS
- CEILING WINDOW
- FRONT WINDOW
- EMERGENCY EXIT FROM OPERATOR'S CAB
- DOOR LOCK
- CAP, COVER WITH LOCK
- HOT AND COOL BOX
- MAGAZINE BOX
- ASHTRAY
- AIR CONDITIONER CONTROLS
- CAR RADIO
- FUSE
- FUSIBLELINK
- CONTROLLER (COMPUTER)
- TOOLBOX
- GREASE GUN HOLDER
- HANDLING ACCUMULATOR
- MACHINE OPERATIONS AND CONTROLS
- BEFORE STARTING ENGINE
- AFTER STARTING ENGINE
- IN COLD AREAS (AUTOMATIC WARMING-UP OPERATION)
- STOPPING THE ENGINE
- CHECK AFTER SHUT OFF ENGINE
- MACHINE OPERATION
- STEERING THE MACHINE
- SWINGING
- WORK EQUIPMENT CONTROLS AND OPERATIONS
- OPERATING WORKING MODE
- PROHIBITED OPERATIONS
- GENERAL OPERATION INFORMATION
- TRAVELING ON SLOPES
- ESCAPE FROM MUD
- RECOMMENDED APPLICATIONS
- REPLACEMENT AND INVERSION OF BUCKET
- PARKING MACHINE
- CHECK AFTER FINISHING WORK
- LOCKING
- TRANSPORTATION PROCEDURE
- LOADING AND UNLOADING WITH TRAILER
- LIFTING MACHINE
- COLD WEATHER OPERATION
- COLD WEATHER OPERATION INFORMATION
- AFTER DAILY WORK COMPLETION
- AFTER COLD WEATHER SEASON
- LONG TERM STORAGE
- BEFORE STORAGE
- DURING STORAGE
- AFTER STORAGE
- TROUBLESHOOTING
- AFTER RUNNING OUT OF FUEL
- PHENOMENA THAT ARE NOT FAILURES
- TOWING THE MACHINE
- LIGHTWEIGHT TOWING HOLE
- SEVERE JOB CONDITION
- DISCHARGED BATTERY
- OTHER TROUBLE
- MAINTENANCE INFORMATION
- OUTLINE OF SERVICE
- HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
- ELECTRIC SYSTEM MAINTENANCE
- HANDLING HYDRAULIC SYSTEM
- WEAR PARTS LIST
- RECOMMENDED FUEL, COOLANT AND LUBRICANTS
- USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- PRODUCTS OTHER THAN KOMATSU GENUINE OIL
- TIGHTENING TORQUE SPECIFICATIONS
- TIGHTENING TORQUE LIST
- PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- SAFETY CRITICAL PARTS
- MAINTENANCE SCHEDULE
- MAINTENANCE SCHEDULE CHART
- MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
- MAINTENANCE PROCEDURE
- INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
- INITIAL 1000 HOURS MAINTENANCE (ONLY AFTER THE FIRST 1000 HOURS)
- WHEN REQUIRED
- CHECK BEFORE STARTING
- EVERY 50 HOURS MAINTENANCE
- EVERY 100 HOURS MAINTENANCE
- EVERY 250 HOURS MAINTENANCE
- EVERY 500 HOURS MAINTENANCE
- EVERY 1000 HOURS MAINTENANCE
- EVERY 2000 HOURS MAINTENANCE
- EVERY 4000 HOURS MAINTENENCE
- EVERY 5000 HOURS MAINTENANCE
- SPECIFICATIONS
- GENERAL PRECAUTIONS
- PRECAUTIONS RELATED TO SAFETY
- PRECAUTIONS WHEN INSTALLING ATTACHMENTS
- HANDLING BUCKET WITH HOOK
- CHECKING FOR DAMAGE TO BUCKET WITH HOOK
- MACHINES READY FOR ATTACHMENTS
- HYDRAULIC CIRCUIT
- ATTACHMENT MOUNTING/DISMOUNTING PROCEDURE
- LONG-TERM STORAGE
- HANDLING SCSH BUSHING
- ATTACHMENT GUIDE
- COMBINATIONS OF WORK EQUIPMENT
- SELECTING TRACK SHOE
- RECOMMENDED ATTACHMENT OPERATIONS
- HYDRAULIC BREAKER
- MONITOR
- SAFETY RULES
- IF ABNORMALITIES ARE FOUND
- WORKING WEAR AND PERSONAL PROTECTIVE ITEMS
- FIRE EXTINGUISHER AND FIRST AID KIT
- SAFETY EQUIPMENT
- KEEP MACHINE CLEAN
- KEEP OPERATOR'S COMPARTMENT CLEAN
- LEAVING OPERATOR'S SEAT WITH LOCK
- HANDRAILS AND STEPS
- MOUNTING AND DISMOUNTING
- NO PERSONS ON ATTACHMENTS
- BURN PREVENTION
- FIRE PREVENTION AND EXPLOSION PREVENTION
- ACTION IF FIRE OCCURS
- WINDSHIELD WASHER FLUID
- FALLING OBJECTS, FLYING OBJECTS AND INTRUDING OBJECTS PREVENTION
- ATTACHMENT INSTALLATION
- ATTACHMENT COMBINATIONS
- CAB WIDOW GLASSES
- UNAUTHORIZED MODIFICATIONS
- SAFETY AT JOBSITE
- WORKING ON LOOSE GROUND
- DISTANCE TO HIGH VOLTAGE CABLES
- ENSURE GOOD VISIBILITY
- VENTILATION FOR ENCLOSED AREA
- SIGNALMAN'S SIGNAL AND SIGNS
- ASBESTOS DUST HAZARD PREVENTION
- CHECKS BEFORE STARTING ENGINE
- SAFETY RULES FOR STARTING ENGINE
- STARTING ENGINE IN COLD WEATHER
- CHECKS AFTER STARTING ENGINE
- SAFETY RULES FOR CHANGING MACHINE DIRECTIONS
- SAFETY RULES FOR TRAVELING
- OPERATIONS ON SLOPES
- OPERATIONS ON SNOW
- SHIPPING THE MACHINE
- BATTERY HAZARD PREVENTION
- STARTING ENGINE WITH BOOSTER CABLES
- SAFETY RULES FOR TOWING
- SAFETY RULES FOR LIFTING OBJECTS
- WARNING TAG
- KEEP WORK PLACE CLEAN AND TIDY
- APPOINT LEADER WHEN WORKING WITH OTHERS
- STOP ENGINE BEFORE CARRYING OUT MAINTENANCE
- TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING
- PROPER TOOLS
- ACCUMULATOR
- PERSONNEL
- ATTACHMENTS
- WORK UNDER THE MACHINE
- NOISE
- WHEN USING HAMMER
- WELDING WORKS
- REMOVING BATTERY TERMINALS
- SAFETY FIRST WHEN USING HIGH-PRESSURE GREASE TO ADJUST TRACK TENSION
- DO NOT DISASSEMBLE RECOIL SPRINGS
- SAFETY RULES FOR HIGH-PRESSURE OIL
- SAFETY HANDLING HIGH-PRESSURE HOSES
- WASTE MATERIALS
- AIR CONDITIONER MAINTENANCE
- COMPRESSED AIR
Inside this manual
Real pages from this operation & maintenance manual (364 pages). Open the sample pages (PDF, 396 KB)
- Controls and operation, page 72: EXPLANATION OF COMPONENTS
- Maintenance, page 212: MAINTENANCE PROCEDURE
- Specifications, page 292: ATTACHMENTS AND OPTIONS
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the PC300LC-7, PC350-7, PC350LC-7 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 364 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Binder not included
Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).