Komatsu MX352 Hydraulic Excavator Operation & Maintenance Manual
274 pages · Publication SEAM061600T
Added to your cart. View cart
- Models
- MX352
- Serial coverage
- MX352 6Y6069 and up
- Manual type
- Operation & Maintenance Manual
- Pages
- 274
- Publication
- SEAM061600T
- Condition
- Brand new
What's inside
From the manual's own table of contents: 212 topics. See sample pages (PDF, 358 KB)
- FOREWORD
- SAFETY INFORMATION
- INTRODUCTION
- DIRECTIONS OF MACHINE
- PRODUCT INFORMATION
- PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
- ENGINE SERIAL NUMBER PLATE AND ITS LOCATION
- EMISSION CONTROL INFORMATION LABEL AND ITS LOCATION
- SERVICE METER LOCATION
- YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
- SAFETY LABELS
- LOCATION OF SAFETY LABELS
- SAFETY MACHINE OPERATION
- STARTING ENGINE
- OPERATION
- TRANSPORTATION
- BATTERY
- TOWING
- LIFTING OBJECTS WITH BUCKET
- SAFETY MAINTENANCE INFORMATION
- MACHINE VIEW ILLUSTRATIONS
- OVERALL MACHINE VIEW
- CONTROLS AND GAUGES
- DETAILED CONTROLS AND GAUGES
Show all 212 topics
- MONITORING SYSTEM
- Emergency Monitors
- Meter Display Portion
- Pilot Lamps
- Monitor Switches Portion
- SWITCHES
- CONTROL LEVERS AND PEDALS
- WINDSHIELD
- SLIDING DOOR
- SLIDING WINDOW
- EMERGENCY ESCAPE HAMMER
- COVER WITH LOCK
- Opening and Closing Covers with Lock
- ENGINE REAR COVER
- COOLING COVER
- MUD COVER
- METHOD OF OPENING (TILTING) FLOOR
- FUSE
- BLOCK FUSE
- OPERATION MANUAL STORAGE
- TOOL BOX
- GREASE GUN HOLDER
- ASHTRAY
- MACHINE OPERATIONS AND CONTROLS
- BEFORE STARTING ENGINE
- Walk-around Checks
- Checks Before Starting
- Adjustment
- Seat Belt
- Operations Before Starting Engine
- Normal Starting
- Starting Engine in Cold Weather
- AFTER STARTING ENGINE
- Breaking-in the New Machine
- Warming-up Operation
- STOPPING THE ENGINE
- MACHINE OPERATION
- Preparations for Moving the Machine Off
- Moving Machine Forward
- Moving Machine Backward
- Stopping Machine
- STEERING THE MACHINE
- Steering
- SWINGING
- WORK EQUIPMENT CONTROLS AND OPERATIONS
- PROHIBITED OPERATIONS
- GENERAL OPERATION INFORMATION
- TRAVELING ON SLOPES
- ESCAPE FROM MUD
- Stuck One Side of Track
- Stuck Both Sides of Tracks
- WORK POSSIBLE USING COMPACT HYDRAULIC EXCAVATOR
- Backhoe work
- Ditching work
- Loading work
- Smoothing work
- Side ditching work
- BUCKET REPLACEMENT
- PARKING MACHINE
- MACHINE INSPECTION AFTER DAILY WORK
- Before stop engine
- After stop engine
- LOCKING
- RUBBER SHOES AND ROAD LINERS
- Rubber Shoes and Road Liners Information
- Warranty for Rubber Shoes and Road Liners
- Using Rubber Shoes and Road Liners
- Long Life Operations
- TRANSPORTATION PROCEDURE
- LOADING AND UNLOADING WITH TRAILER
- Loading
- Securing Machine
- Unloading
- LIFTING MACHINE
- COLD WEATHER OPERATION
- COLD WEATHER OPERATION INFORMATION
- Fuel and Lubricants
- Cooling System Coolant
- CAB HEATER IN COLD WEATHER
- AFTER DAILY WORK COMPLETION
- AFTER COLD WEATHER SEASON
- LONG TERM STORAGE
- BEFORE STORAGE
- DURING STORAGE
- AFTER STORAGE
- TROUBLES AND ACTIONS
- RUNNING OUT OF FUEL
- PHENOMENA THAT ARE NOT FAILURES
- TOWING THE MACHINE
- SEVERE JOB CONDITION
- DISCHARGED BATTERY
- Battery Removal and Installation
- Battery Charges
- Starting Engine with Booster Cables
- OTHER TROUBLE
- Electrical System
- Chassis
- Engine
- MAINTENANCE INFORMATION
- LUBRICANTS, COOLANT AND FILTERS
- HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
- Fuel
- Grease
- Carrying Out KOWA (Komatsu Oil Wear Analysis)
- Oil and Fuel Storage
- Filters
- ELECTRIC SYSTEM MAINTENANCE
- HANDLING HYDRAULIC SYSTEM
- WEAR PARTS
- WEAR PARTS LIST
- LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS
- TIGHTENING TORQUE SPECIFICATIONS
- TIGHTENING TORQUE LIST
- SAFETY CRITICAL PARTS
- SAFETY CRITICAL PARTS LIST
- MAINTENANCE SCHEDULE
- MAINTENANCE SCHEDULE CHART
- MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
- MAINTENANCE PROCEDURE
- WHEN REQUIRED
- CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
- CLEAN INSIDE OF COOLING SYSTEM
- CHECK LEVEL OF BATTERY ELECTROLYTE
- CLEAN WATER SEPARATOR ELEMENT
- DRAIN WATER AND SEDIMENT FROM FUEL TANK
- CHECK AND TIGHTEN TRACK SHOE BOLTS
- CHECK AND ADJUST TRACK TENSION
- CHECK, RUBBER SHOES OR ROAD LINERS
- CHECK AND ADJUST RUBBER SHOE TENSION
- REPLACE RUBBER SHOES
- REPLACE ROAD LINERS
- REPLACE BUCKET TEETH
- CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
- CHECK, CLEAN AND LUBRICATE CAB SLIDE DOOR RAIL AND ROLLER
- LUBRICATING
- BLEEDING AIR FROM HYDRAULIC SYSTEM
- CHECK BEFORE STARTING
- EVERY 500 HOURS MAINTENANCE
- CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE
- REPLACE FUEL FILTER CARTRIDGE
- CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL
- CLEAN AND INSPECT RADIATOR FINS AND OIL COOLER FINS
- CHECK AND ADJUST COOLING FAN BELT TENSION
- EVERY 1000 HOURS MAINTENANCE
- REPLACE HYDRAULIC OIL FILTER ELEMENT
- CHANGE OIL IN FINAL DRIVE CASE
- CHECK ENGINE VALVE CLEARANCE, ADJUST
- EVERY 2000 HOURS MAINTENANCE
- CHANGE OIL IN HYDRAULIC TANK, CLEAN STRAINER
- CHECK ALTERNATOR, STARTING MOTOR
- SPECIFICATIONS
- ATTACHMENTS AND OPTIONS - GENERAL INFORAMTION
- SAFETY FIRST
- ATTACHMENT INSTALLATION
- BUCKET WITH HOOK
- AIR CONDITIONER
- CONTROL PANEL AND COMPONENTS
- AIR CONDITIONER CONTROLS
- AIR CONDITIONER MAINTENANCE
- Every 250 Hours Maintenance
- RADIO
- CONTROL PANEL
- CONTROLS OF RADIO
- Listening to radio
- Automatic Tuning
- Manual Tuning
- Preset Station Buttons
- Using auto memory
- Time Adjustment
- Automatic selection of reception for monaural/stereo
- Antenna
- CARE FOR RADIO
- WINDSHIELD WASHER
- WINDSHIELD WASHER OPERATION
- MACHINE READY FOR ATTACHMENT
- LOCATIONS
- HYDRAULIC CIRCUIT
- Hydraulic Circuit Connection
- ATTACHMENT OPERATIONS
- When Using Breaker
- When Using General Attachment Such as Crusher
- CHANGING MACHINE CONTROL PATTERN (IF PATTERN CHANGE VALVE EQUIPPED)
- CONTROL PATTERN CHANGE PROCEDURE
- MACHINE CONTROL PATTERNS
- ATTACHMENT GUIDE
- ATTACHMENT COMBINATIONS
- RECOMMENDED ATTACHMENT OPERATIONS
- HYDRAULIC BREAKER
Inside this manual
Real pages from this operation & maintenance manual (274 pages). Open the sample pages (PDF, 357 KB)
- Controls and operation, page 77: DETAILED CONTROLS AND GAUGES
- Maintenance, page 221: MAINTENANCE
- Specifications, page 237: SPECIFICATIONS
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the MX352 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 274 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).