MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Komatsu PC130-7 Hydraulic Excavator Operation & Maintenance Manual

331 pages · Publication UEAM003604

$69.73
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
PC130-7
Serial coverage
PC130-7 72642 and up
Manual type
Operation & Maintenance Manual
Pages
331
Publication
UEAM003604
Condition
Brand new
Komatsu PC130-7 Hydraulic Excavator Operation & Maintenance Manual, publication UEAM003604

What's inside

From the manual's own table of contents: 97 sections, 284 entries. See sample pages (PDF, 381 KB)

FOREWORD
SAFETY INFORMATION
NOISE EMISSION LEVELS
VIBRATION LEVELS1 topic
  • GUIDE TO REDUCE VIBRATION LEVELS ON MACHINE
INTRODUCTION
DIRECTIONS OF MACHINE
BREAKING-IN THE NEW MACHINE
PRODUCT INFORMATION
PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
ENGINE SERIAL NUMBER PLATE AND ITS LOCATION
SERVICE METER LOCATION
YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
MACHINE SERIAL NUMBER PLATE
SAFETY LABELS
LOCATION OF SAFETY LABELS
SAFETY MACHINE OPERATION
STARTING ENGINE
OPERATION
TRANSPORTATION
BATTERY
TOWING
LIFTING OBJECTS WITH BUCKET
SAFETY MAINTENANCE INFORMATION
MACHINE VIEW ILLUSTRATIONS
Show all 97 sections
OVERALL MACHINE VIEW1 topic
  • CONTROLS AND GAUGES
DETAILED CONTROLS AND GAUGES37 topics
  • MONITORING SYSTEM
    • BASIC CHECK MONITORS
    • CAUTION MONITORS
    • EMERGENCY MONITORS
    • METER DISPLAY PORTION
    • MONITOR SWITCHES PORTION
  • SWITCHES
  • CONTROL LEVERS AND PEDALS
  • SUN ROOF
  • WINDSHIELD
  • EMERGENCY EXIT FROM OPERATOR'S CAB
  • DOOR LOCK
  • CAP WITH LOCK
  • HOT AND COOL BOX
  • MAGAZINE BOX
  • ASHTRAY
  • AIR CONDITIONER CONTROLS
    • AIR CONDITIONER CONTROL PANEL
    • METHOD OF OPERATION
    • USE AIR CONDITIONER WITH CARE
    • INSPECTION AND MAINTENANCE OF AIR CONDITIONER EQUIPPED MACHINE
    • OTHER FUNCTIONS
  • CAB RADIO CASSETTE
    • CONTROLS OF RADIO CASSETTE
    • PRECAUTIONS WHEN USING
  • AUXILIARY ELECTRIC POWER
    • 24V POWER SOURCE
    • 12V POWER SOURCE
  • FUSE
  • FUSIBLE LINK
  • CONTROLLERS
  • TOOL BOX
  • GREASE GUN HOLDER
  • HANDLING GREASE GUN
  • REFUELLING PUMP
  • ACCUMULATOR
    • RELEASING HYDRAULIC PRESSURE WITH ACCUMULATOR
MACHINE OPERATIONS AND CONTROLS8 topics
  • BEFORE STARTING ENGINE
    • CHECKS
    • CHECKS BEFORE STARTING
    • ADJUSTMENT
    • SEAT BELT
    • OPERATIONS BEFORE STARTING ENGINE
  • NORMAL STARTING
  • STARTING ENGINE IN COLD WEATHER
AMBIENT TEMPERATURE RANGE FOR OPERATION
AFTER STARTING ENGINE2 topics
  • WARMING-UP OPERATION
  • IN COLD WEATHER AREAS
STOPPING THE ENGINE
MACHINE OPERATION4 topics
  • PREPARATIONS FOR MOVING THE MACHINE OFF
  • MOVING MACHINE FORWARD
  • MOVING MACHINE BACKWARD
  • STOPPING MACHINE
STEERING THE MACHINE1 topic
  • STEERING
SWINGING
WORK EQUIPMENT CONTROLS AND OPERATIONS
WORKING MODE
PROHIBITED OPERATIONS
GENERAL OPERATION INFORMATION
TRAVELING ON SLOPES
ESCAPE FROM MUD2 topics
  • STUCK ONE SIDE OF TRACK
  • STUCK BOTH SIDES OF TRACKS
RECOMMENDED APPLICATIONS4 topics
  • BACKHOE WORK
  • SHOVEL WORK
  • DITCHING WORK
  • LOADING WORK
BUCKET REPLACEMENT AND INVERSION2 topics
  • REPLACEMENT
  • INVERSION
PARKING MACHINE
CHECK AFTER SHUT OFF ENGINE
MACHINE INSPECTION AFTER DAILY WORK
LOCKING
OVERLOAD WARNING DEVICE
TRANSPORTATION PROCEDURE
LOADING AND UNLOADING WITH TRAILER3 topics
  • LOADING
  • SECURING MACHINE
  • UNLOADING
LIFTING MACHINE
COLD WEATHER OPERATION
COLD WEATHER OPERATION INFORMATION5 topics
  • FUEL AND LUBRICANTS
    • COOLING SYSTEM COOLANT
    • BATTERY
  • AFTER DAILY WORK COMPLETION
  • AFTER COLD WEATHER SEASON
LONG TERM STORAGE4 topics
  • BEFORE STORAGE
  • DURING STORAGE
  • AFTER STORAGE
  • STARTING MACHINE AFTER LONG-TERM STORAGE
TROUBLES AND ACTIONS14 topics
  • RUNNING OUT OF FUEL
  • PHENOMENA THAT ARE NOT FAILURES
  • TOWING THE MACHINE
  • LIGHTWEIGHT TOWING HOLE
  • SEVERE JOB CONDITION
  • DISCHARGED BATTERY
    • BATTERY REMOVAL AND INSTALLATION
    • BATTERY CHARGES
    • STARTING ENGINE WITH BOOSTER CABLES
  • OTHER TROUBLE
    • ELECTRICAL SYSTEM
    • CHASSIS
    • ENGINE
    • ELECTRONIC CONTROL SYSTEM
MAINTENANCE INFORMATION
LUBRICANTS, COOLANT AND FILTERS8 topics
  • HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
    • FUEL
    • COOLING SYSTEM COOLANT
    • GREASE
    • CARRYING OUT KOWA (KOMATSU OIL WEAR ANALYSIS)
    • OIL AND FUEL STORAGE
    • FILTERS
  • ELECTRIC SYSTEM MAINTENANCE
WEAR PARTS1 topic
  • WEAR PARTS LIST
LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS1 topic
  • PROPER SELECTION
TIGHTENING TORQUE SPECIFICATIONS
TIGHTENING TORQUE LIST
SAFETY CRITICAL PARTS
SAFETY CRITICAL PARTS LIST
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE CHART
MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
MAINTENANCE PROCEDURE
INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
INITIAL 1000 HOURS MAINTENANCE (ONLY AFTER THE FIRST 1000 HOURS)
WHEN REQUIRED14 topics
  • CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
  • CLEAN INSIDE OF COOLING SYSTEM
  • CHECK AND TIGHTEN TRACK SHOE BOLTS
  • CHECK AND ADJUST TRACK TENSION
  • CHECK ELECTRICAL INTAKE AIR HEATER
  • REPLACE BUCKET TEETH (VERTICAL PIN TYPE)
  • REPLACE BUCKET TEETH (HORIZONTAL PIN TYPE)
  • ADJUST BUCKET CLEARANCE
  • CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
  • CHECK AND ADJUST AIR CONDITIONER
  • WASH WASHABLE FLOOR
  • BLEEDING AIR FROM HYDRAULIC SYSTEM
  • METHOD FOR RELEASING INTERNAL PRESSURE IN HYDRAULIC CIRCUIT
  • CHECK NITROGEN GAS CHARGE PRESSURE IN ACCUMULATOR (CONTROL CIRCUIT)
CHECK BEFORE STARTING
EVERY 100 HOURS MAINTENANCE2 topics
  • LUBRICATING
  • CHECK SWING MACHINERY CASE OIL, ADD OIL
EVERY 250 HOURS MAINTENANCE2 topics
  • CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL
  • CHECK LEVEL OF BATTERY ELECTROLYTE
EVERY 500 HOURS MAINTENANCE10 topics
  • REPLACE FUEL FILTER CARTRIDGE
  • CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE
  • CHECK SWING PINION GREASE LEVEL, ADD GREASE
  • LUBRICATE SWING CIRCLE
  • RADIATOR CORE AND FINS - CHECK/CLEAN
  • CLEAN AIR CONDITIONER FRESH/RECIRC FILTERS
  • REPLACE HYDRAULIC OIL FILTER ELEMENT
  • REPLACE BREATHER ELEMENT IN HYDRAULIC TANK
  • CHECK AND ADJUST COOLING FAN BELT TENSION
  • CHECK, ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION
EVERY 1000 HOURS MAINTENANCE15 topics
  • CHANGE OIL IN SWING MACHINERY CASE
    • CHANGE OIL IN FINAL DRIVE CASE
    • CHECK ALL TIGHTENING PARTS OF TURBOCHARGER
    • CHECK PLAY TURBOCHARGER ROTOR
    • CHECK NITROGEN GAS CHARGE PRESSURE IN ACCUMULATOR (FOR BREAKER)
  • EVERY 2000 HOURS MAINTENANCE
    • CHECK PTO GEAR CASE, ADD OIL
    • CLEAN HYDRAULIC TANK STRAINER
    • CLEAN, CHECK TURBOCHARGER
    • CHECK ALTERNATOR, STARTING MOTOR
    • CHECK ENGINE VALVE CLEARANCE, ADJUST
  • EVERY 4000 HOURS MAINTENENCE
    • CHECK WATER PUMP
  • EVERY 5000 HOURS MAINTENANCE
    • CHANGE OIL IN HYDRAULIC TANK
SPECIFICATIONS2 topics
  • EXPLANATION OF LIFTING CAPACITY CHART (PC130-7 1- PC BOOM)
  • EXPLANATION OF LIFTING CAPACITY CHART (PC130-7 2-PC BOOM)
GENERAL PRECAUTIONS FOR SAFETY7 topics
  • HYDRAULIC QUICK COUPLER PIPING
    • LOCATIONS
    • OPERATION
  • PRECAUTIONS WHEN SELECTING
  • READ THE INSTRUCTION MANUAL THOROUGHLY
  • PRECAUTIONS WHEN REMOVING OR INSTALLING
  • PRECAUTIONS WHEN USING
BUCKET WITH HOOK2 topics
  • HOOK CONDITION
  • PROHIBITED OPERATIONS
MACHINE READY FOR ATTACHMENT9 topics
  • LOCATIONS
  • HYDRAULIC CIRCUIT
    • HYDRAULIC CIRCUIT CONNECTION
  • ATTACHMENT REMOVAL AND INSTALLATION
    • ATTACHMENT REMOVAL
    • ATTACHMENT INSTALLATION
  • ATTACHMENT OPERATIONS
    • WHEN USING BREAKER
    • WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER
CRUSHER CONTROL FOR ROTATION
ACCUMULATOR1 topic
  • HYDRAULIC SYSTEM - PRESSURE RELEASE
ATTACHMENT GUIDE
OTHER ATTACHMENTS
ATTACHMENT COMBINATIONS
TRACK SHOES SELECTION
BUCKET TEETH SELECTION2 topics
  • TEETH SELECTION
  • SELECTION GUIDE FOR HORIZONTAL OR VERTICAL PIN TYPE TOOTH
HANDLING OF RUBBER PAD SHOE AND ROAD LINER6 topics
  • WORKING ENVIRONMENT
  • WORKING CONDITIONS
  • STORAGE, PROTECTION
  • EXTENT OF DAMAGE TO RUBBER
  • CHECK ROAD LINER
  • REPLACE ROAD LINER
RECOMMENDED ATTACHMENT OPERATIONS
HYDRAULIC BREAKER
BOOM
FEATURES OF 2-PIECE BOOM & ARM3 topics
  • BEFORE STORAGE POSTURE WHEN LEAVING MACHINE
  • TESTING AND ADJUSTING
  • PERODIC MAINTENANCE
HANDLING MACHINES EQUIPPED WITH KOMTRAX1 topic
  • BASIC PRECAUTIONS
SUPER LONG FRONT BOOM AND ARM
OPERATION INSTRUCTION
WORKING MODES
CHECKS BEFORE STARTING
USING SUPER LONG FRONT
METHOD OF WORK1 topic
  • WHEN TRAVELLING
CONTROL LEVERS, PEDALS12 topics
  • SAFETY LOCK LEVER (1)
  • TRAVEL LEVERS (WITH PEDAL, AUTO-DECELERATION MECHANISM) (2)
  • LEFT WORK EQUIPMENT CONTROL LEVER (3)
  • RIGHT WORK EQUIPMENT CONTROL LEVER (4)
  • PRECAUTIONS FOR OPERATION OF SUPER LONG FRONT
  • TRANSPORT & STORAGE OF SUPER LONG FRONT MACHINE
    • INSTALLATION OF SUPPORTING LINK
  • TRANSPORTATION OF SUPER LONG FRONT MACHINE
  • WORKING RANGE OF SUPER LONG FRONT
  • LIFTING CAPACITY PC130 SUPER LONG FRONT
  • MAINTENANCE
    • SPECIAL SERVICE REQUIREMENTS FOR SUPER LONG FRONT WORK EQUIPMENT

Inside this manual

Real pages from this operation & maintenance manual (331 pages). Open the sample pages (PDF, 381 KB)

Sample pages from the Komatsu PC130-7 Hydraulic Excavator Operation & Maintenance Manual: Controls and operation, Maintenance, Specifications
  • Controls and operation, page 161: MACHINE OPERATIONS AND CONTROLS
  • Maintenance, page 256: MAINTENANCE
  • Specifications, page 276: SPECIFICATIONS

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the PC130-7 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operation & Maintenance Manual UEAM003604$69.73
Other manuals for the PC130-7

Service manuals

Details
Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 331 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Binder not included

Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.

Other editions and similar models

Komatsu PC130-7Operation & Maintenance Manual · TEN00166-03 · $69.51

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).