Komatsu PC490LCi-11 Hydraulic Excavator Operation & Maintenance Manual
381 pages · Publication CEAM032400
Added to your cart. View cart
- Models
- PC490LCi-11
- Serial coverage
- PC490LCi-11 A45001 and up
- Manual type
- Operation & Maintenance Manual
- Pages
- 381
- Publication
- CEAM032400
- Condition
- Brand new
What's inside
From the manual's own table of contents: 19 sections, 96 entries. See sample pages (PDF, 466 KB)
FOREWORD5 topics
- BEFORE READING THIS MANUAL
- SAFETY INFORMATION
- INTRODUCTION
- intelligent Machine Control
- MAIN USE OF MACHINE
SAFETY7 topics
- SAFETY LABELS
- LOCATION OF SAFETY LABELS
- PRECAUTIONS FOR OPERATION
- START ENGINE
- PRECAUTIONS RELATED TO CONTROL BOX
- PRECAUTIONS RELATED TO SEMI-AUTO MODE
- PRECAUTIONS FOR TRANSPORTATION
OPERATION24 topics
- GENERAL VIEW
- MACHINE EQUIPMENT NAME
- CAB EQUIPMENT NAMES
- EXPLANATION OF COMPONENTS
- EXPLANATION OF MACHINE MONITOR EQUIPMENT
- SWITCH
- CONTROL LEVERS AND PEDALS
- INTELLIGENT MACHINE CONTROL SYSTEM
- OTHER EQUIPMENT
- MACHINE OPERATIONS AND CONTROLS
- CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
- METHOD FOR STARTING ENGINE
- METHOD FOR STOPPING ENGINE
- METHOD FOR PARKING MACHINE
- HANDLING RADIO
- TRANSPORTATION
- REMOVE AND INSTALL GNSS ANTENNA
- REMOVE AND INSTALL HANDRAIL
- REMOVE AND INSTALL GNSS ANTENNA AND ANTENNA FOR NETWORK MODEM
- PRECAUTIONS FOR LONG-TERM STORAGE
- STARTING MACHINE AFTER LONG-TERM STORAGE
- TROUBLES AND ACTIONS
- IF ERROR INFORMATION IS DISPLAYED ON CONTROL BOX
- OTHER TROUBLE
MAINTENANCE4 topics
- MAINTENANCE SCHEDULE
- MAINTENANCE SCHEDULE TABLE
- MAINTENANCE PROCEDURE
- EVERY 500 HOURS MAINTENANCE
SPECIFICATIONS1 topic
- SPECIFICATIONS:PC490LCI-11
ATTACHMENTS AND OPTIONS2 topics
- RECOMMENDED ATTACHMENT OPERATIONS
- HYDRAULIC BREAKER
SETTING3 topics
- INTELLIGENT MACHINE CONTROL SETTINGS
- CONTROL BOX
- METHOD FOR DISPLAYING MAIN MENU
MACHINE MONITOR1 topic
- MC SETTING
MODE3 topics
- PRECAUTIONS FOR REPLACING PARTS AND FAILURES
- WORKING MODE
- MODE SETTINGS
TRAVEL MODE5 topics
- TRAVEL MODE SETTINGS
- DISPLAY OF TRAVEL MODE
- OFFSET MENU OF SURFACE
- TEMPORARY DESIGN MENU
- TARGET SURFACE SETTINGS
ROUGH DIGGING MODE1 topic
- METHOD FOR SETTING ROUGH DIGGING SCREEN
FINE DIGGING MODE1 topic
- METHOD FOR SETTING FINE DIGGING MODE SCREEN
TARGET SURFACE SETTINGS2 topics
- TARGET SURFACE SETTING MENU
- METHOD FOR SETTING TARGET SURFACE
BUCKET EDGE POSITION3 topics
- DISPLAY BUCKET EDGE POSITION
- METHOD FOR COMPARING WITH BENCHMARK
- METHOD FOR CORRECTING BUCKET EDGE POSITION
DAILY CALIBRATION1 topic
- CHECKS OF INTELLIGENT MACHINE CONTROL EQUIPMENT
CHECK GNSS COMMUNICATION STATUS8 topics
- METHOD FOR CHECKING GNSS COMMUNICATION STATUS
- METHOD FOR CHECKING NUMBER OF SATELLITES AND ERROR OF POSITIONING
- METHOD FOR DISPLAYING BUCKET EDGE COORDINATES
- METHOD FOR SETTING SATELLITE POSITION DISPLAY AND ELEVATION ANGLE
- METHOD FOR DISPLAYING GNSS RECEIVER INFORMATION
- METHOD FOR CHEKING EXPECTANCY OF EDGE ACCURANCY
- METHOD FOR SETTING GLONASS SATELLITE
- METHOD FOR SETTING TILT SENSOR
USE OF TOPO SURVEY3 topics
- METHOD FOR PERFORMING TOPO SURVEY MANUALLY
- METHOD FOR PERFORMING AUTO-TOPO SURVEY
- METHOD FOR CANCELING TOPOGRAPHIC SURVEYS
TROUBLESHOOTING3 topics
- CONTROL BOX SCREEN DISPLAY
- MODE
- WORKING ACCURACY
Inside this manual
Real pages from this operation & maintenance manual (381 pages). Open the sample pages (PDF, 465 KB)
- Specifications, page 63: To raise the front of the seat, apply your weight to the rear
- Maintenance, page 108: MAINTENANCE PROCEDURE
- Controls and operation, page 318: This control operates for the slope design data (A) of angle
- Color page, page 191: Perform the layout setting of the working screen.
- Color page, page 175: METHOD FOR SETTING SOUND VOLUME
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 381 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Binder not included
Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).