Komatsu WA100MS Wheel Loader Operation & Maintenance Manual
269 pages · Publication VEAM280201
Added to your cart. View cart
- Models
- WA100MS
- Serial coverage
- H50051 and up
- Manual type
- Operation & Maintenance Manual
- Pages
- 269
- Publication
- VEAM280201
- Condition
- Brand new
What's inside
From the manual's own table of contents: 7 sections, 203 entries. See sample pages (PDF, 408 KB)
Introduction25 topics
- Product publications information
- Foreword
- EU Directives
- Safety information
- Introduction
- Intended use
- Breaking-in the machine
- Location of plates
- Machine identification plate (PIN)
- Engine name-plate
- Axle serial no. plate
- Transmission serial no. plate
- ROPS/FOPS-Cab serial no. plate
- Seat operator serial no. plate
- Table to enter serial no. and distributor
- Emission Control Warranty
- Emission control warranty statement (Applies to Canada only)
- Garantie sur le contrôle des émissions
- Énoncé de garantie sur le contrôle des émissions (applicable au Canada seulement)
- Dimensions, weights and operating data
- 1.10.CE-conforming equipment
- CE-conforming equipment – part 1
- CE-conforming equipment – part 2
- Manufacturer-supplied CE-conforming equipment
- 1.11.Loading and securing
Safety111 topics
- General safety measures
- Safety instructions
- Safety devices
- Emergency exit
- Clothing and personal protection
- Machine modifications
- Before you leave the driver’s seat
- Mounting and dismounting
- Fire prevention and fire fighting
- Protection against asbestos dust
- Protection against injuries
- Working at high temperatures
- Roll-over protection system (ROPS)
- Attachment for protection against falling objects (FOPS)
- Attachments
- Battery
- Safety precautions during operation
- Prior to daily starting up
- Machine operation
- Transport
- Precautions for maintenance
- Personnel
- Before carrying out maintenance
- During maintenance
- Tyres
- Safety labels on the machine
- Positions and order numbers of information labels
- Positions and order numbers of safety labels
- Operation
- General view
- General view of the machine
- Controls and indicators
- Overall view
- Switches, controls and warning lights
- Description of the individual elements
- Instrument panel
- Warning lights
- Control lamps
- Measuring indicators
- Switches
- Control levers and pedals
- Articulated steering catch
- Traction device
- Door unlocking system
- Alarm horn for reverse driving – option
- Fuses
- Slow-blowing fuses
- Adjusting the heater and ventilation system
- Air-conditioning
- Operation
- Pre-start checks
- Visual inspection
- Pre-start checks
- Adjustments prior to machine start
- Adjusting the driver’s seat
- Starting the engine
- Warming up the engine
- Driving with the machine
- Start-up
- Limiting the maximum speed
- Changing the driving direction
- Turning and steering
- Braking
- Stopping the machine
- Operating the work equipment
- Multifunctional lever
- Control lever for special equipment
- Switching lever of bucket
- Working with the wheel loader
- Tyre-appropriate operation
- Switching on the 100 % differential lock (if equipped)
- Loading work
- Removal work
- Excavation work
- Precautions for special operations
- Adjusting the position of the work equipment
- Parking the machine
- Switching off the engine
- Check after stopping the engine
- Locking
- Tyre handling
- Transporting the machine
- Securing the articulated steering
- Lifting the machine
- Driving the machine onto loading area of transport vehicle
- Securing the machine during the transport
- After transport
- Cold weather operation
- Before the cold season
- Precautions after completion of work
- After the cold season
- Long-term storage
- Before storage
- During storage
- After storage
- Troubleshooting
- Towing the machine
- Starting the engine with a booster cable
- For insufficient braking effect
- Checking the service brake
- Checking the parking brake function
- Emergency steering properties
- Emergency lowering
- Other troubles
- Electrical system
- Engine
- Hydraulic system
- Brakes
- Steering
- Axles
- Driver’s cab
Maintenance50 topics
- Maintenance guide
- Guidelines
- Maintenance basics
- Oil, fuel and coolant specifications
- Fuel
- Coolant
- Grease
- Storing oil and fuel
- Filters
- Biodegradable hydraulic oil and lubricants
- Specifications of the electrical system
- Wearing parts list
- Lubricants, fuels and filling capacities
- Lubrication chart
- Tools and standard tightening torques (bolts, nuts)
- Introduction of recommended tools
- Torque list
- Periodical replacement of safety-critical parts
- Maintenance schedule chart
- Service procedure
- Pre-start checklist
- Cooling system – checking the coolant level, topping up coolant
- Maintenance upon demand
- Maintenance after the first 50 operating hours
- Maintenance after the first 250 operating hours
- Maintenance every 10 operating hours
- Maintenance every 50 operating hours
- Maintenance every 250 operating hours
- Maintenance every 500 operating hours
- Transfer box gearing – checking the oil level
- Maintenance every 1000 operating hours
- V-Belt, generator – checking and adjusting the tension
- Service Brake - Checking and adjusting oil
- Checking and adjusting system pressures
- Have the system pressures checked and adjusted at an authorised Komatsu garage
- Hydraulics – Exchanging the venting filters
- Hydraulic system, replacing the filter insert
- Maintenance every 1500 operating hours
- Front and rear axle – oil change
- Transfer box gearing – changing oil
- Maintenance every 2000 operating hours
- Cooling system – exchanging coolant and cleaning the system
- Checking and adjusting the valve clearance
- Hydraulic system, oil change
- Ventilating the hydraulic oil tank
- Checking the fuel pump
- Checking the fuel and coolant tubes, replacing the tubes (if required)
- Checking the water pump
- Maintenance every 4000 operating hours
- Lubrication, universal joint
Technical data3 topics
- Noise emission levels
- Vibration levels
- Limit values for slopes
Special equipment and attachments7 topics
- E.C.S.S
- Structure and functioning principle of the E.C.S.S
- Precautionary measures for switching on the E.C.S.S
- Operating the E.C.S.S
- Switching ON the E.C.S.S
- Switching OFF the E.C.S.S
- Precautions when handling the accumulator
Inside this manual
Real pages from this operation & maintenance manual (269 pages). Open the sample pages (PDF, 407 KB)
- Controls and operation, page 125: 3.3. Operation
- Maintenance, page 217: 5.7.7. Maintenance every 250 operating hours
- Specifications, page 249: 6.1. Technical data
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 269 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).