MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Komatsu WA450-2 Wheel Loader Operation & Maintenance Manual

156 pages · Publication SEAM042KD200

$69.81
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
WA450-2
Serial coverage
WA450 A25001 and up
Manual type
Operation & Maintenance Manual
Pages
156
Publication
SEAM042KD200
Condition
Brand new
Komatsu WA450-2 Wheel Loader Operation & Maintenance Manual, publication SEAM042KD200

What's inside

From the manual's own table of contents: 85 sections, 214 entries. See sample pages (PDF, 204 KB)

General51 topics
  • GENERAL LOCATIONS AND SPECIFICATIONS
  • ENGINE
  • INSTRUMENTS AND CONTROLS
  • MONITOR PANEL
    • CHECK MONITOR GROUP
    • Engine Oil Level Monitor
    • Coolant Level Monitor
    • CAUTION MONITOR GROUP
    • Charge Monitor
    • Fuel Level Monitor
    • CAUTION MONITOR GROUP
    • Brake Line Failure Monitor
    • Engine Oil Pressure Monitor
    • Coolant Level Monitor
    • Air Pressure Monitor
    • Torque Convertor Oil Temperature Monitor
    • METER GROUP
    • Parking Brake Pilot Lamp
    • Pilot Lamp for Working Lamp
    • Transmission Cut-Off Selector Pilot Lamp
    • Air Pressure Gauge
    • Engine Cooling Water Temperature Gauge
    • Torque Converter Oil Temperature Gauge
    • Fuel Gauge
    • Turn Signal Pilot Lamp
    • High Beam Pilot Lamp
    • Speedometer
    • Service Meter
  • SWITCHES
    • TRANSMISSION CUT-OFF SELECTOR SWITCH
    • ETHER START SWITCH
    • HORN &lTON
    • HAZARD LAMP SWITCH
    • PARKING BRAKE SWITCH
    • WORKING LAMP SWITCH
    • STARTING SWITCH
    • LAMP SWITCHES
    • Lamp switch
    • Turn signal lever
    • Dimmer switch
    • ROOM LAMP SWITCH
    • CIGARETTE LIGHTER
    • KICKDOWN SWITCH
    • FRONT WIPER SWITCH
    • REAR WIPER SWITCH
  • LEVERS AND PEDALS
    • DIRECTIONAL LEVER
    • SPEED CONTROL LEVER
    • SPEED CONTROL LEVER STOPPER
    • STEERING COLUMN TILT LEVER
    • ACCELERATOR PEDAL
BRAKE PEDALS2 topics
  • Right brake peda
  • Left brake pedal
LIFT ARM CONTROL LEVER
SAFETY LOCK
AIR CLEANER SERVICE INDICATOR
WORK EQUIPMENT CONTROL LEVER (MdNO-iiVER T%)
OPERATOR’S SEAT
SEAT ANGLE ADJUSTMENT
SEAT CUSHION ADJUSTMENT
BACKREST ADJUSTMENT
SEAT HEIGHT ADJUSTMENT
FORWARD-BACKWARD ADJUSTMENT
ANGLE ADJUSTMENT
CHECK
CHECK MONITOR PANEL
CHECK AND REFILL COOLANT
CHECK OIL LEVEL AND REFILL IN ENGINE oit ‘PAN’
CHECK FUEL LEVEL AND REFILL FUEL
CHECK AIR CLEANER SERVICE INDICATOR
DRAIN WATER FROM AIR TANKS
SEPARATOR
FAN-INSPECTION5 topics
  • FAN DRIVE %EiT .-‘It&PECTIoti
  • BELT TENSION CHECK
  • BELT TENSION CHECK AND ADJUST
  • FAN DRIVE BELT ADJUST
  • ALTERNATOR DRIVE BELT AoJtiST
OPERATING YOUR MACHINE
CHECKS AFTER STARTING
Show all 86 sections
CHANGING GEAR SPEED
TURNING
PROPER BUCKET AND TIRE42 topics
  • ADJUSTMENT OF WORK EQUIPMENT
  • ADJUSTING BOOM KICKOUT
  • ADJUSTING BUCKET POSITIONER
  • BUCKET LEVEL INDICATOR
  • USING ACCUMULATORS
  • PRECAUTIONS FOR MAINTENANCE
  • HANDLING TIRES
  • PRECAUTIONS WHEN HANDLING TIRES
  • PRECAUTIONS WHEN DRIVING MACHINE
  • TIRE PRESSURE _
    • INFLATING TIRES
  • TOWING
  • TOWING THE MACHINE
    • WHEN ENGINE CAN BE USED
    • WHEN ENGINE CANNOT BE USED
  • RELEASING PARKING BRAKE
  • COLD WEATHER OPERATION
  • PREPARATION FOR LOW TEMPERATURE
    • FUEL AND LUBRICANTS
    • COOLANT
    • BATTERY
  • STARTING IN COLD WEATHER
  • CAUTIONS AFTER COMPLETION OF WORK
  • AFTER COLD WEATHER
  • MEMORANDA
  • PERIODIC MAINTENANCE
  • BLEEDING AIR FROM CIRCUIT
  • BLEEDING AIR FROM HYDRAULIC CIRCUIT
  • PERIODICAL REPLACEMENT OF SAFETY PARTS
  • MAINTENANCE TABLE
  • OIL FILLER AND LEVEL GAUGE POSITIONS
  • CHECK BEFORE STARTING
  • EVERY 50 HOURS SERVICE
  • FUELTANK
  • TIRE
  • EVERY 100 HOURS SERVICE
  • HYDRAULIC TANK
  • LUBRICATING
  • AIR CONDITIONER FILTER
  • INITIAL 250 HOURS SERVICE
  • TRANSMISSION OIL FILTER
  • EVERY 250 HOURS SERVICE
ENGINE OIL PAN AND FILTER
AIR INTAKE SYSTEM
CHECK ELECTROLYTE LEVEL IN BATrERY
FUEL FILTER
CORROSION RESISTOR (Coolant filter)
COOLANT ADDITIVE CONCENTRATION :““:: ‘
LUBRICATING
AIR CONDITIONER COMPRESS& BELT
WHEEL HUB NUTS
EVERY 500 HOURS SERVICE
TRANSMISSION OIL FILTER
AIR DRYER
EVERY 1000 HOURS SERVICE
TRANSMISSION CASE AND S+RA;NER :’ ‘. : ‘
TRANSMISSION CASE BREATHER
EVERY 1500 HOURS SERVICE
VALVES AND INJECTORS
EVERY 2000 HOURS SERVICE
HYDRAULIC TANK AND FILTER
AIR CONDITIONER FILTER
HYDRAULIC TANK BREATHER
AXLE
PPC CIRCUIT STRAINER
ALTERNATOR AND STARTING MOTOR
BRAKE DISC
INTERNAL PART OF AIR DRYER
ACCUMULATOR
EVERY 6000 HOURS SERVICE
INJECTORS
FUEL PUMP
TURBOCHARGER
AIR COMPRESSOR
WATER PUMP : ‘
FAN IDLER PULLEY
FAN HUB (BELT DRIVEN)
COOLANT CHANGE AND FLUSHING THE SYSTEM2 topics
  • COOLANT
  • DCA4 UNIT MAINTENANCE G;bE
WHEN REQUIRED
TURBOCHARGER MOUNTING NUTS
CHECK, CLEAN AND REPLACE AIR CLEANER EkMENT6 topics
  • CLEANlNd OR REPLACING OUTER ELEMENT
  • REPLACING INNER ELEMENT
  • CLEANING OUTER ELEMENT
  • With compressed air
  • With water
  • With cleaning agent
CHECK AND REFILL TRANSMISSION OIL9 topics
  • CLEAN RADIATOR FINS
  • CHECK AND REFILL AXLE OIL
  • CLEAN AXLE CASE BREATHER
  • CHASSIS
  • MACHINE AND ENGINE SERIAL NUMBERS
  • FUEL, COOLANT AND LUBRICANTS
  • BEFORE MAINTENANCE
  • DURING MAINTENANCE
  • MISCELLANEOUS
BUCKET OPERATION
EXCAVATION : : ‘
LEVELING
LOAD AND CARRY OPERATIONS3 topics
  • LOADING
  • CROSS DRIVE LOADING
  • LOADING ‘
OPERATING THE AIR CONDITIONER
EQUIPMENT ON CONTROL PANEL7 topics
  • FAN SWITCH
  • AIR CONDITIONER Siii~H~
  • AIR INTAKE SELECTOR LEVER
  • TEMPERATURE CONTROL LEVER
  • PRECAUTIONS FOR USING AIR CONDIiOiER
  • HANDLING THE AIR CONDITIONER IN SEASON
  • HANDLING THE AIR CONDITIONER IN OFF-SEASONS
OPERATING CAB HEATER
EQUIPMENT ON CONTROL PANEL2 topics
  • TEMPERATURE &JiRbi LiiER
  • AIR INJAKE SELECTOR LEVER
LOCKING CAP
HANDLING OF BAJJERY
PRECAUTIONS FOR CHARGING BiTTEiY
REMOVAL AND INSTALL4TION OF BATTERY
STARTING ENGINE WITH A BOOSTER CABLE
TRANSPORTATION
STORAGE
BEFORE STORAGE
DURING STORAGE
AFTER STORAGE
COOLANT AND LUBRICANTS

Inside this manual

Real pages from this operation & maintenance manual (156 pages). Open the sample pages (PDF, 205 KB)

Sample pages from the Komatsu WA450-2 Wheel Loader Operation & Maintenance Manual: Specifications, Controls and operation, Maintenance
  • Specifications, page 13: SECTION 1
  • Controls and operation, page 29: CIGARETTE LIGHTER
  • Maintenance, page 75: Clean the filter case and fill a new filter cartridge

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the WA450-2 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operation & Maintenance Manual SEAM042KD200$69.81
Other manuals for the WA450-2

Service manuals

Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 156 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).