Komatsu WA470-8 Wheel Loader Operation & Maintenance Manual
446 pages · Publication TEN00674-01
Added to your cart. View cart
- Models
- WA470-8
- Serial coverage
- 100001 and up
- Manual type
- Operation & Maintenance Manual
- Pages
- 446
- Publication
- TEN00674-01
- Condition
- Brand new
What's inside
From the manual's own table of contents: 28 sections, 184 entries. See sample pages (PDF, 457 KB)
INTRODUCTION3 topics
- MAIN USE OF MACHINE
- DIRECTIONS OF MACHINE
- VISIBILITY FROM OPERATOR'S SEAT
PRODUCT INFORMATION4 topics
- LOCATION OF PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
- LOCATION OF EPA REGULATIONS, ENGINE NUMBER PLATE
- SERVICE METER LOCATION
- YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
SAFETY LABELS2 topics
- LOCATION OF SAFETY LABELS
- CONTENTS OF SAFETY LABELS
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE9 topics
- PRECAUTIONS BEFORE STARTING OPERATION
- PREPARATIONS FOR SAFE OPERATION
- PRECAUTIONS TO PREVENT FIRE
- PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
- DO NOT GET CAUGHT IN WORK EQUIPMENT
- PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
- UNAUTHORIZED MODIFICATION
- PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
- PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
PRECAUTIONS FOR OPERATION5 topics
- PRECAUTIONS FOR JOBSITE
- START ENGINE
- PRECAUTIONS FOR OPERATION
- PRECAUTIONS FOR TRANSPORTATION
- TOWING AND BEING TOWED
PRECAUTIONS FOR MAINTENANCE3 topics
- PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
- PRECAUTIONS FOR INSPECTION AND MAINTENANCE
- TIRES
PRECAUTIONS FOR AdBlue/DEF5 topics
- GENERAL CHARACTER AND PRECAUTIONS FOR HANDLING
- PRECAUTIONS FOR ADDING
- PRECAUTIONS FOR STORING
- PRECAUTIONS FOR FIRE HAZARD AND LEAKAGE
- OTHER PRECAUTIONS
GENERAL VIEW3 topics
- MACHINE EQUIPMENT NAME
- CONTROLS AND GAUGES NAMES
- OTHER EQUIPMENT NAME
EXPLANATION OF COMPONENTS4 topics
- EXPLANATION OF MACHINE MONITOR EQUIPMENT
- SWITCHES
- CONTROL LEVERS AND PEDALS
- OTHER EQUIPMENT
MACHINE OPERATIONS AND CONTROLS38 topics
- CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
- METHOD FOR STARTING ENGINE
- METHOD FOR OPERATIONS AND CHECKS AFTER STARTING ENGINE
- METHOD FOR STOPPING ENGINE
- AND STOPPING MACHINE
- METHOD FOR STEERING MACHINE
- METHOD FOR OPERATING WORK EQUIPMENT
- METHOD FOR CHECKING BUCKET ANGLE
- RECOMMENDED APPLICATIONS
- REMOTE POSITIONER
- METHOD FOR PARKING MACHINE
- METHOD FOR CHECKING AFTER FINISHING WORK
- LOCK
- HANDLE TIRE
- HANDLE AIR CONDITIONER
- EXPLANATION OF AIR CONDITIONER EQUIPMENT
- METHOD FOR OPERATING AIR CONDITIONER
- HANDLE RADIO
- EXPLANATION OF RADIO EQUIPMENT
- METHOD FOR CONTROLLING RADIO
- TRANSPORTATION
- TRANSPORTATION PROCEDURE
- LOADING AND UNLOADING WITH TRAILER
- METHOD FOR LIFTING MACHINE
- COLD WEATHER OPERATION
- COLD WEATHER OPERATION INFORMATION
- PRECAUTIONS AFTER DAILY WORK COMPLETION
- PRECAUTIONS IN COLD WEATHER
- AFTER COLD WEATHER SEASON
- PRECAUTIONS FOR LONG-TERM STORAGE
- PREPARATION FOR LONG-TERM STORAGE
- MAINTENANCE DURING LONG-TERM STORAGE
- STARTING MACHINE AFTER LONG-TERM STORAGE
- TROUBLES AND ACTIONS
- ACTIONS WHEN RUNNING OUT OF FUEL
- PRECAUTIONS FOR TOWING MACHINE
- PRECAUTIONS FOR DISCHARGED BATTERY
- OTHER TROUBLE
MAINTENANCE21 topics
- PRECAUTIONS FOR MAINTENANCE
- CHECK SERVICE METER READING
- KOMATSU GENUINE REPLACEMENT PARTS
- KOMATSU GENUINE LUBRICANTS
- ALWAYS USE CLEAN WASHER FLUID
- FRESH AND CLEAN LUBRICANTS
- CHECK DRAINED OIL AND USED FILTER
- PRECAUTIONS FOR REFILLING OIL OR FUEL
- PRECAUTIONS FOR ADDING AdBlue/DEF
- WELDING INSTRUCTIONS
- DO NOT DROP THINGS INSIDE MACHINE
- PRECAUTIONS FOR KDPF
- PRECAUTIONS FOR SCR ASSEMBLY
- DUSTY JOBSITES
- AVOID MIXING OIL
- LOCK INSPECTION COVERS
- BLEED AIR FROM HYDRAULIC CIRCUIT
- PRECAUTIONS WHEN INSTALLING HYDRAULIC HOSES
- CHECKS AFTER INSPECTION AND MAINTENANCE
- FUEL AND LUBRICANTS TO MATCH THE AMBIENT TEMPERATURE
- CLOSE ENGINE SIDE COVER SECURELY
OUTLINE OF MAINTENANCE2 topics
- HANDLE OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
- HANDLE ELECTRICAL COMPONENTS
MAINTENANCE SCHEDULE1 topic
- MAINTENANCE SCHEDULE TABLE
MAINTENANCE PROCEDURE14 topics
- INITIAL 10 HOURS MAINTENANCE (ONLY FOR THE FIRST 100 HOURS)
- INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
- WHEN REQUIRED
- CHECKS BEFORE STARTING
- EVERY 50 HOURS MAINTENANCE
- EVERY 100 HOURS MAINTENANCE
- EVERY 250 HOURS MAINTENANCE
- EVERY 500 HOURS MAINTENANCE
- EVERY 1000 HOURS MAINTENANCE
- EVERY 2000 HOURS MAINTENANCE
- EVERY 4000 HOURS MAINTENANCE
- EVERY 4500 HOURS MAINTENANCE
- EVERY 8000 HOURS MAINTENANCE
- EVERY 9000 HOURS MAINTENANCE
Show all 28 sections
HANDLE JOYSTICK STEERING SYSTEM22 topics
- EXPLANATION OF COMPONENTS IN JOYSTICK STEERING SYSTEM
- JOYSTICK ON/OFF SWITCH
- UPSHIFT SWITCH
- DOWNSHIFT SWITCH
- JOYSTICK DIRECTIONAL SELECTOR SWITCH
- JOYSTICK STEERING LEVER
- HI / LO SELECTOR SWITCH
- HORN SWITCH
- JOYSTICK CONSOLE LOCK CANCEL KNOB
- JOYSTICK CONSOLE FORE-AND-AFT POSITION ADJUSTER KNOB
- ARMREST ADJUSTER KNOB
- JOYSTICK CONSOLE HORIZONTAL POSITION ADJUSTER KNOB
- JOYSTICK PILOT LAMP
- ARMREST LEFT-RIGHT POSITION ADJUSTER BOLT
- FUNCTION AND STRUCTURE OF JOYSTICK STEERING SYSTEM
- PRECAUTIONS FOR HANDLING JOYSTICK STEERING SYSTEM
- METHOD FOR HANDLING JOYSTICK STEERING SYSTEM
- SELECTION OF OPERATION WITH JOYSTICK STEERING LEVER AND STEERING WHEEL
- METHOD FOR GETTING ON OR OFF TO OPERATOR'S CAB
- METHOD FOR ADJUSTING JOYSTICK CONSOLE
- METHOD FOR ADJUSTING OPERATOR'S SEAT
- METHOD FOR REMOVING AND INSTALLING HEADREST
HANDLE MULTIFUNCTION MONO-LEVER12 topics
- EXPLANATION OF EQUIPMENT ON MULTIFUNCTION MONO-LEVER
- MULTIFUNCTION MONO-LEVER
- KICKDOWN SWITCH
- HOLD SWITCH
- DIRECTIONAL SELECTER SWITCH ON MULTIFUNCTION MONO-LEVER
- PCS(PROPORTIONAL CONTROL SWITCH)
- LCD UNIT
- OILFLOW CONTROL MODE DISPLAY LAMP (FIXED OILFLOW MODE)
- OILFLOW CONTROL MODE DISPLAY LAMP (PROPORTIONAL OILFLOW MODE)
- DETENT OPERATION PILOT LAMP
- ATTACHMENT OILFLOW LEVEL
- METHOD FOR SETTING PCS
REPLACEMENT PARTS8 topics
- PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
- DEFINED LIFE PARTS LIST
- CONSUMABLE PARTS
- CONSUMABLE PARTS LIST
- RECOMMENDED FUEL, COOLANT, AND LUBRICANT
- LUBRICATION CHART
- TURE
- RECOMMENDED BRANDS AND QUALITIES OTHER THAN KOMATSU GENUINE OILS
Inside this manual
Real pages from this operation & maintenance manual (446 pages). Open the sample pages (PDF, 456 KB)
- Controls and operation, page 170: CONTROL LEVERS AND PEDALS
- Specifications, page 284: During auto operation, the air flow is automatically adjusted.
- Maintenance, page 362: EVERY 100 HOURS MAINTENANCE
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the WA470-8 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 446 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Binder not included
Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).