Linde E 12-02, E 15-02, E 16-02 Electric Pallet Truck Operator's Manual
115 pages · Publication 324-804-3001
Added to your cart. View cart
- Models
- E 12-02, E 15-02, E 16-02 Electric
- Manual type
- Operator's Manual
- Pages
- 115
- Publication
- 324-804-3001
- Condition
- Brand new
What's inside
From the manual's own table of contents: 157 topics. See sample pages (PDF, 829 KB)
- Description
- Approved applications
- Technical note
- Truck takeover
- Type plates
- Technical data
- Technical description
- Drive
- Steering
- Hydraulic system
- Operation
- Brakes
- Handbrake
- Brush monitor
- Electrical system
- General view of truck
- Controls and indicators
- Composite instrument
- Hour meter
- Battery discharge indicator
- Beginning operation
- Safety rules
- Important safety information
- Handling fluids and lubricants
Show all 157 topics
- Accident prevention check
- Operation of industrial trucks in the plant area
- Noise emission level
- Frequency characteristics for human body vibrations
- Running-in instructions
- of the truck
- Daily checks
- Daily checks and servicing before operation
- Tighten the wheel fasteners
- Check the tyre inflation pressure
- Push, pull the emergency isolator button
- Checking the battery charge
- Charging the battery
- Opening, closing the battery cover
- Connecting the battery to a suitable external charger
- and specific gravity
- Battery change
- Battery removal with a crane
- Adjusting the adjustable steering column
- Adjusting the driver’s seat
- Applying, opening the seat belt
- Driving
- Travel in the forward direction
- Travel in the reverse direction
- Reversing the direction of travel
- Malfunctions during operation
- Single-pedal model
- Steering system
- Braking system
- Service brake, electric brake
- Foot brake
- Operating the electric motor brake (LBC)
- Engaging the handbrake
- Releasing the handbrake
- and attachments
- Tilting the mast forward
- Tilting the mast back
- Raising the fork carriage
- Lowering the fork carriage
- Operating the attachments
- Operating the sideshift
- Operating the clamp
- Operating the horn
- Turning on the directional indicators
- Switching on the hazard warning light
- Switching on the lights
- Turning on the working lights
- Turning on the windscreen wiper
- Fuses
- Checking, renewing the fuses
- Fuses (option)
- Before loading
- Positioning the forks
- Loading
- Transporting the load
- Unloading
- Before leaving the lift truck unattended
- Tow coupling
- Lifting point for wheel jack
- Hoisting the truck
- Hoisting the truck with a crane
- Hoisting the truck with lifting eyelets
- Mast removal
- Towing instructions
- Towing procedure
- Emergency exit for trucks with rear windscreen
- Taking the truck out of operation
- Measures before taking the truck out of operation
- Putting the truck back into operation
- Maintenance
- General information
- Mast versions
- Work on the mast and on the front part of the truck
- Securing the mast against tilting back
- Standard mast
- Securing the raised standard mast
- Duplex mast
- Securing the raised duplex mast
- Triplex mast
- Securing the raised triplex mast
- Services after the first 50 hours of operation
- Inspection and maintenance chart
- Inspection and maintenance as required
- Check seat belt for condition and operation
- Clean the lift truck
- Clean and spray the lift chain
- Check the tyres for damage and foreign objects
- Renew the motor brushes
- Lubricate the mast and tilt cylinder bearings
- Change contactor tips
- Clean the traction Controller fan
- 500-hour inspection and maintenance
- Clean the close-coupled steer axle
- Check oil level in reduction gearboxes
- Check reduction gearboxes for leaks
- Check the hydraulic oil level
- Clean the traction motor fan
- pump motor
- Check the working and steering hydraulics for leaks
- Sideshift: Clean, grease and check the mounting
- and connections for condition and tightness
- Clean the digital control
- Check the contactors
- Check the braking system
- Check the brake linings
- overhead guard and close-coupled steer axle
- Check and lubricate other bearings and joints
- Check the motor brushes, renew if necessary
- mounting and function
- with chain spray
- Check the fork quick-releases and fork stops
- linkage bearings
- attachments are fitted
- Retighten the mast fastening bolts
- 1500-hour inspection and maintenance
- Renew the hydraulic system breather filter
- 3000-hour inspection and maintenance
- Renew the hydraulic oil and suction filter
- Change the oil in the reduction gearboxes
- Inspection and maintenance specifications
- Lubricant recommendations
- Hydraulic oil
- Bio hydraulic oil
- Gear oil
- Lubricating grease
- Battery grease
- Chain spray
- Troubleshooting guide
- Wiring diagram for 24 Volt electrical system
- Wiring diagram for 48 Volt electrical system
- (options)
- Wiring diagram for E 16 electrical system (options)
- steering hydraulics
Inside this manual
Real pages from this operator's manual (115 pages). Open the sample pages (PDF, 828 KB)
- Controls and operation, page 16: Controls and indicators
- Specifications, page 37: Check the load capacity diagram (1) before picking up a load.
- Maintenance, page 57: 500-hour inspection and maintenance
- Color page, page 106: EFHIJHKLMNOPONHKQ
- Color page, page 94: D=+/)-+-.+ -/0*1 53EF 2.+3 F50 )/+ 63 -.+ 35/4)E 5=+/)-637 =596-653: G++= .)389
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 115 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).