Linde E 14-02, E 16-02, E 16 C-02, E 18 C-02, E 16 P- 02, E 18 P-02, E 20 P-02 Electric Forklift Operator's Manual
123 pages · Publication 335-804-3001
Added to your cart. View cart
- Models
- E 14-02, E 16-02, E 16 C-02, E 18 C-02, E 16 P- 02, E 18 P-02, E 20 P-02 Electric
- Manual type
- Operator's Manual
- Pages
- 123
- Publication
- 335-804-3001
- Condition
- Brand new
What's inside
From the manual's own table of contents: 186 topics. See sample pages (PDF, 862 KB)
- Description
- Approved applications
- Technical note
- Truck takeover
- Type plates
- Technical data
- Noise emissions levels
- Frequency characteristic for human body vibrations
- Technical description
- Drive
- Steering
- Hydraulic system
- Operation
- Brakes
- Handbrake
- Brush monitor
- Electrical system
- General view of truck
- Controls and indicators
- Combined instrument
- Hour meter
- Battery discharge indicator
- Beginning operation
- Safety rules
Show all 186 topics
- Important safety information
- Handling fluids and lubricants
- Accident prevention check
- Operation of industrial trucks in the plant area
- Running-in instructions
- the truck
- Daily checks
- Daily checks and servicing before operation
- Opening the overhead guard
- First lock-in position: Servicing position
- Second lock-in position: Battery change
- Closing the overhead guard
- Checking the battery charge
- Charging the battery
- Connecting the battery to a suitable external charger
- specific gravity
- Battery change
- Battery removal with a crane
- Checking the brake fluid level
- Check tyre pressure on combined steer axle
- Check tyre pressure on close coupled steer axle
- Pull the emergency isolator button
- Adjusting armrest of the driver’s seat
- Adjusting the driver’s seat
- Applying the seat belt
- Opening the seat belt
- Driving
- Travel in the forward direction
- Travel in the reverse direction
- Reversing the direction of travel
- Malfunctions during operation
- Single-pedal model
- Steering system
- Braking system
- Service brake, electric brake
- Foot brake
- Operating the electric motor brake (LBC)
- Engaging the handbrake
- Releasing the handbrake
- and attachments
- Tilting the mast forward
- Tilting the mast back
- Raising the fork carriage
- Lowering the fork carriage
- Operating the attachments
- Operating the sideshift
- Operating the clamp
- attachments
- Installation of additional equipment
- Turning on the front working lights
- Turning on the rear working lights
- Turning on the front windscreen wiper
- Turning on the rear windscreen wiper
- Switching on the lights
- Switching on the hazard warning light
- Turning on the directional indicators
- Electric heater
- Heater controls
- Data Logger
- Operating the horn
- Removing, installing the rubber cover (E 14)
- Fuses
- Checking, renewing the fuses
- Fuses (option)
- Before loading
- Loading
- Positioning the forks
- Transporting the load
- Unloading
- Before leaving the lift truck unattended
- Tow coupling
- cable faulty
- Transport, Hoisting the truck
- Transporting the truck on a lorry or low-bed trailer
- Hoisting the truck with a crane
- Hoisting the truck with the eyebolts*
- Wheel change
- Changing the rear wheels
- Changing the front wheels
- Mast removal
- Towing instructions
- Towing procedure
- Tilting the mast manually
- Lowering the forks manually
- Emergency exit for trucks with rear windscreen
- windscreen (special equipment)
- Taking the truck out of operation
- Measures before taking the truck out of operation
- Putting the truck back into operation
- Maintenance
- General information
- Maintenance intervals
- Mast versions
- Work on the mast and on the front part of the truck
- Securing the mast against tilting back
- Standard mast
- Securing the raised standard mast
- Duplex mast
- Securing the raised duplex mast
- Triplex mast
- Securing the raised triplex mast
- Services after the first 50 hours of operation
- Inspection and maintenance chart
- as required
- Check seat belt for condition and operation
- Clean the lift truck
- Clean and spray the lift chain
- Tighten the wheel nuts
- Check the tyres for damage and foreign objects
- Renew the carbon brushes
- and tilt cylinder bearings
- Other cleaning and greasing work
- or 1000 hours or annually
- Clean the closed-coupled steer axle
- Clean the combined steer axle
- Lubricate the combined steer axle
- Checking the hydraulic oil level
- steering and working hydraulics pump motor
- Inspect the joystick boot
- Clean the traction and pump motor fans
- Clean the digital control
- Lubricate the mast and tilt cylinder pivots
- Sideshift: Clean, grease and check the mounting
- connections for condition and tightness
- Check the braking system
- Check the brake linings
- Check the working and steering hydraulics for leaks
- and steer axle
- Grease the overhead guard pivots
- Check and lubricate other pivots and joints
- mounting and function
- with chain spray
- if attachments are fitted
- pivots and overhead guard lock
- Retighten the mast fastening bolts
- Check the fork quick-releases and fork stops
- Check the contactors
- Change the wheel drive oil
- motor brushes
- Check the condition of the antistatic ribbon
- Renew the breather filter
- Renew the pressure filter
- Renew the suction filter
- Check the wheel drives for oil leaks
- hours or every 2 years
- Renew the hydraulic oil
- Renew the brake fluid
- Change the wheel drive oil (with wheels mounted)
- Change the wheel drive oil (with wheels removed)
- Inspection and maintenance specifications
- Lubricant recommendations
- Hydraulic oil
- Bio hydraulic oil
- Gear oil
- Lubricating grease
- Battery grease
- Chain spray
- Brake fluid
- Troubleshooting guide (hydraulic system)
- Wiring diagram - LDC control
- Wiring diagram (options)
- hydraulics
Inside this manual
Real pages from this operator's manual (123 pages). Open the sample pages (PDF, 862 KB)
- Controls and operation, page 17: Toggle switch for additional functions*
- Specifications, page 43: Check the load capacity diagram (1) before picking up a load.
- Maintenance, page 66: Open the overhead guard to the 2nd lock-in position.
- Color page, page 114: EFHIJHKLMNOPONHKQ
- Color page, page 102: D=+/)-+-.+ -/0*1 53EF 2.+3 F50 )/+ 63 -.+ 35/4)E 5=+/)-637 =596-653: G++= .)389
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 123 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).