Linde E 25-03 S, E 30-03 S, E 25/600-03 S, E 30/600-03 S Electric Forklift Operator's Manual
117 pages · Publication 336-804-3301
Added to your cart. View cart
- Models
- E 25-03 S, E 30-03 S, E 25/600-03 S, E 30/600-03 S Electric
- Manual type
- Operator's Manual
- Pages
- 117
- Publication
- 336-804-3301
- Condition
- Brand new
What's inside
From the manual's own table of contents: 177 topics. See sample pages (PDF, 854 KB)
- Description
- Approved applications
- Technical note
- Truck takeover
- Type plate
- Technical data
- Noise emission value
- Frequency characteristic for human body vibrations
- Technical description
- Drive
- Steering
- Hydraulic system
- Operation
- Brakes
- Handbrake
- Electrical system
- General view of truck
- Controls and indicators
- Composite instrument
- Hour meter
- Battery discharge indicator
- Beginning operation
- Safety rules
- Safety information
Show all 177 topics
- Handling fluids and lubricants
- Accident prevention check
- Operation of industrial trucks in the plant area
- Running-in instructions
- Daily checks
- Daily checks and servicing before operation
- Check the tyre inflation pressure
- Check the tightness of the wheel nuts
- Push the emergency stop button
- Pull the emergency stop button
- Opening the overhead guard
- First lock-in position: Servicing position
- Second lock-in position: Battery change
- Closing the overhead guard
- Check the battery charge
- Charging the battery
- Connecting the battery to a suitable external charger
- specific gravity of the battery
- Battery change
- Battery removal with a crane
- Adjusting armrest of the driver’s seat
- Adjusting the driver’s seat
- Applying the seat belt
- Opening the seat belt
- Driving
- Travel in the forward direction
- Travel in the reverse direction
- Reversing the direction of travel
- Malfunctions during operation
- Single-pedal model
- Steering system
- Braking system
- Service brake, regenerative brake
- Foot brake
- Operating the electric motor brake (LBC)
- Engaging the handbrake
- Releasing the handbrake
- and attachments
- Tilting the mast forward
- Tilting the mast back
- Raising the fork carriage
- Lowering the fork carriage
- Operating the attachments
- Operating the sideshift
- Operating the clamp
- Single control lever operation of mast and attachments
- Turning on the front working lights
- Turning on the rear working lights
- Turning on the front windscreen wiper and washer
- Turning on the rear windscreen wiper
- Turning on the lighting
- Turning on the hazard warning light
- Turning on the directional indicator lights
- Heater controls
- Data Logger
- Operating the horn
- Opening the electrical compartment cover
- Closing the electrical compartment cover
- Fuses
- Checking, renewing the fuses
- Automotive fuses
- Main circuit fuses
- Fuses (options)
- Before loading
- Positioning the forks
- Loading
- Transporting the load
- Unloading
- Before leaving the lift truck unattended
- Tow coupling
- Transport
- Transport with lorry or low-bed trailer
- Slinging the truck
- Slinging the truck with a crane
- Wheel change: Jack locations
- Changing the rear wheels
- Changing the front wheels
- Mast removal
- Towing instructions
- Towing procedure
- Tilting the mast manually
- Lowering the forks manually
- Emergency exit for trucks with rear windscreen
- rear windscreen
- Maintenance
- Taking the truck out of operation
- Measures before taking the truck out of operation
- Putting the truck back into operation
- General information
- Mast versions
- Work on the mast and on the front part of the truck
- Securing the mast against tilting back
- Standard mast
- Securing the raised standard mast
- Duplex mast
- Securing the raised duplex mast
- Triplex mast
- Securing the raised triplex mast
- Services after the first 50 hours of operation
- Inspection and maintenance chart
- Inspection and maintenance as required
- Check seat belt for condition and operation
- Clean the lift truck
- Clean and spray the lift chain
- Tighten the wheel nuts
- Check the tyres for damage and foreign objects
- Check the security of the hydraulic oil tank
- Lubricate the steer axle, mast and tilt cylinder bearings
- Other cleaning and greasing work
- 1000-hour inspection and maintenance
- Clean the steering axle
- Lubricate the steering axle
- Inspect the joystick boot
- power steering and working hydraulics pump motors
- lift and power module fans
- Clean the digital control
- Lubricate the mast and tilt cylinder pivots
- Retighten the mast fastening bolts
- Sideshift: Clean, grease and check the mounting
- Check the braking system
- Check the brake linings, lubricate the brake lever pivot
- Check the working and steering hydraulics for leaks
- for security
- Check the condition of the antistatic ribbon
- Check condition, mounting and function
- lubricate the lift chain with chain spray
- Check the fork quick-releases and fork stops
- are fitted
- Check the hydraulic oil level
- and overhead guard lock
- Grease the overhead guard pivots
- Check and lubricate other pivots and joints
- Check the contactor
- Change the wheel drive oil
- and connections for condition and tightness
- Renew the breather filter
- Renew the suction filter
- Change the pressure filter
- Check the wheel drives for oil leaks
- 3000-hour inspection and maintenance
- Renew the hydraulic oil
- Change the oil in wheel drive
- Inspection and maintenance specifications
- Lubricants recommendations
- Hydraulic oil
- Bio hydraulic oil
- Gear oil
- Lubricating grease
- Battery grease
- Chain spray
- Troubleshooting guide
- Wiring diagram - LDC controller
- Wiring diagram (options)
Inside this manual
Real pages from this operator's manual (117 pages). Open the sample pages (PDF, 853 KB)
- Controls and operation, page 31: Single-pedal model
- Specifications, page 42: Before loading
- Maintenance, page 66: Grease the overhead guard pivots
- Color page, page 108: EFHIJHKLMNOPONHKQ
- Color page, page 96: D=+/)-+-.+ -/0*1 53EF 2.+3 F50 )/+ 63 -.+ 35/4)E 5=+/)-637 =596-653: G++= .)389
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 117 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).