Linde E20C/600, E25C/600, E30C, E30C/600 Electric Forklift Operator's Manual
93 pages · Publication 347-804-2501
Added to your cart. View cart
- Models
- E20C/600, E25C/600, E30C, E30C/600 Electric
- Manual type
- Operator's Manual
- Pages
- 93
- Publication
- 347-804-2501
- Condition
- Brand new
What's inside
From the manual's own table of contents: 209 topics. See sample pages (PDF, 511 KB)
- Linde - Your Partner
- Your Linde lift trucks
- Approved applications
- Safe operation
- Description
- Technical note
- Truck commissioning
- Truck specifications
- Identification plates
- Technical description
- Model Basic Capacity
- Steering
- Hydraulic system
- Operation
- Drive
- Brush monitor
- Brakes
- Parking Brake
- Electrical system
- General view of truck
- Controls and indicators
- Error / Fault codes
- Hour meter
- Battery level indicator lights
Show all 209 topics
- General Status and Fault Code Instructions
- Foreword
- Parts and Service
- Safety
- Safety Decals
- Operator Warning Decal
- Do Not Lift Personnel Decal
- Don’t Stand Or Walk Under The Forks Decal
- Tip Over
- Tip-Over Decal
- Non Tip-Over
- Operational Warnings
- Lug Nut Warning
- Parking Brake Warning Decal
- No Step Warning Decal
- Test / Service Warning Decal
- Auto-Braking Disabled Warning Decal
- Crushed Fingers Warning Decal
- Safety rules
- Before Raising Hood Caution Decal
- Accident prevention check
- Operation of industrial trucks in the plant area
- Check for leaks
- Handling fluids and lubricants
- Battery
- Preparing a new truck for operation
- Checks and services
- Operator Care and Maintenance
- Operator's Daily Visual Inspection
- before operation
- Check the tightness of the wheel nuts
- Check wheels and tires
- Check overhead guard
- Check tilt cylinders
- Check Mast
- Check mast lift cylinder and hoses
- Check mast lift chains
- Check carriage and backrest extension
- Check forks
- Check fork locking pins/latches
- Check seat and seat belt
- Check hydraulic oil level
- Check hood latch
- Check battery connectors and cables
- Check battery retention
- Check battery
- Check warning decals
- Check data plate and capacity plate
- Operator's Daily Operational Inspection
- Push the emergency battery disconnect
- Pull the emergency battery disconnect
- Check instrumentation
- Charging the battery
- Connecting the battery to a suitable external charger
- of the battery
- Battery change
- Battery removal and installation with a crane
- Adjusting armrest of the driver’s seat
- Adjusting the driver’s seat
- Fastening the seat belt
- Opening the seat belt
- Check seat switch
- Driving
- Configuration
- Travel in the forward direction
- Travel in the reverse direction
- Reversing the direction of travel
- Malfunctions during operation
- Optional Single-Pedal Operation
- Reversing direction
- Steering system
- Braking systems
- Auto brake (regenerative brake, or plugging)
- Service brake / Foot brake
- Engaging the Parking Brake
- Releasing the Parking Brake
- Tilting the mast forward
- attachments
- Tilting the mast back
- Raising the fork carriage
- Lowering the fork carriage
- Operating the attachments
- Operating the sideshift (if so equipped)
- Operating the clamp (if so equipped)
- Joystick Functional Combinations
- Back-Up Alarm
- Turning on the front working lights
- Turning on the rear working lights
- Turning on the dome light
- Turning on the operators compartment fan
- Operating the horn
- Optional alarms and lights
- Before loading
- Loading
- Positioning the forks
- Transporting the load
- Transporting the load, unloading
- Unloading
- Before leaving the lift truck unattended
- Tow coupling
- Taking the truck out of operation
- Measures before taking the truck out of operation
- Putting the truck back into operation
- General information
- Maintenance
- Towing instructions
- Towing procedure
- Wheel change
- Jack locations
- Changing the rear wheels
- Changing the front wheels
- manually
- Tilting the mast manually
- Lowering the forks manually
- Mast versions
- Work on the mast and on the front part of the truck
- Securing the mast against tilting back
- Standard mast
- Function
- Securing the raised standard mast
- Duplex mast
- Securing the raised duplex mast
- Triplex mast
- Securing the raised triplex mast
- Services after the first 50 hours of operation
- Inspection and maintenance chart
- Check seat belt for condition and operation
- Clean the lift truck
- Clean and lubricate motor controller connectors
- Clean and spray the lift chain
- Renew the carbon brushes
- Tighten the wheel bolts
- foreign objects
- Lubricate the steer axle, mast and tilt cylinder bearings
- Opening the electrical compartment cover
- Closing the electrical compartment cover
- Checking, renewing the fuses
- Main circuit (power) fuses
- 500-hour inspection and maintenance
- Clean the steering axle
- Lubricate the steering axle
- hydraulics pump motors
- emergency battery disconnect switch
- Clean the digital controls
- Lubricate the mast and tilt cylinder pivots
- Retighten the mast fastening bolts
- Sideshifter*
- Clean, grease and check the mounting
- Check the braking system
- Visual check of the motor brushes
- steering hydraulics for leaks
- overhead guard and steering axle
- mounting and function
- Adjust the lift chain length
- Lubricate the lift chain with chain spray
- Adjust the lift chain length*
- Check the fork quick-releases and fork stops
- attachments are fitted
- Check the hydraulic oil level
- Check and oil the pedal and travel control linkage pivots
- Check and lubricate other pivots and joints
- Check the contactor
- Change the drive axle gear oil
- connections for condition and tightness
- 1500-hour inspection and maintenance
- Renew the breather filter
- Renew the suction strainer
- Change the pressure filter element
- Check the drive axle for oil leaks
- Renew the hydraulic oil
- 3000-hour inspection and maintenance
- Lubricate the horn brush contacts
- Change the oil in wheel drive
- Hydraulic oil
- Lubricants recommendations
- Gear oil
- Lubricating grease
- Battery grease
- Chain spray
- Troubleshooting guide
- Wiring diagram - LDC controller
- Cable colors
- Wiring diagram (options)
- Color code
- and steering hydraulics
Inside this manual
Real pages from this operator's manual (93 pages). Open the sample pages (PDF, 512 KB)
- Controls and operation, page 13: Controls and indicators
- Specifications, page 35: Battery change
- Maintenance, page 66: Lubricate the mast and tilt cylinder pivots
- Color page, page 25: Operator's Manual: 347
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the E30C are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 93 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).