New Holland Boomer 30, 35 Compact Tractor Operator's Manual
129 pages · Publication 52112803
Added to your cart. View cart
What's inside
From the manual's own table of contents: 138 topics. See sample pages (PDF, 668 KB)
- GENERAL NOTICES FOR SAFETY
- BEFORE USING THE TRACTOR
- SAFETY PRECAUTIONS (READ THIS FOR SAFETY BEFORE USING)
- (1) NOTICES BEFORE USING THE TRACTOR
- (2) NOTICES WHEN STARTING ENGINE
- (3) NOTICES WHILE OPERATING/USING THE TRACTOR
- (4) NOTICES WHEN CONNECTING IMPLEMENT
- (5) NOTICES WHEN TOWING THE TRACTOR
- (6) NOTICES WHEN TRANSPORTING THE TRACTOR
- (7) NOTICES WHEN SERVICING THE TRACTOR AFTER WORK
- (8) NOTICES WHEN HANDLING DIESEL FUEL
- (9) NOTICES WHEN LEAVING THE TRACTOR
- (10) NOTICES RELATING TO TOXIC SUBSTANCES
- LONG-TERM
- (1) PREPARATION FOR STORAGE
- (2) CHECK & MAINTENANCE DURING STORAGE
- (3) PREPARATION FOR REUSE
- NOTICES FOR "USE & DISPOSAL" RELATED TO THE ENVIRONMENT
- SYMBOLS
- SAFETY DECALS
- (1) HANDLING AND MAINTENANCE OF SAFETY DECALS
- (2) SAFETY DECALS AND ATTACHING POSITION
- INSTRUCTION FOR SAFE
- (1) THE NAME OF EACH PART
Show all 138 topics
- BOARDING AND EXITING THE
- (1) BOARDING THE TRACTOR
- (2) DRIVER'S SEAT (HST TYPE)
- (3) SEAT ADJUSTMENT
- (4) TILT STEERING WHEEL
- (5) SEAT BELT
- (6) EXITING THE TRACTOR
- SAFETY
- (1) HOOD (BONNET)
- (2) FENDER
- (3) PTO SAFETY COVER AND PROTECTION CAP
- (4) FOLDABLE SAFETY FRAME (ROPS) (OPTIONAL)
- INSTRUMENTS AND CONTROLS
- INSTRUMENT PANEL AND FRONT
- (1) INSTRUMENT PANEL
- (2) KEY SWITCH
- (3) TURN SIGNAL LIGHT SWITCH
- (4) LIGHT SWITCH
- (5) HORN SWITCH
- (6) HAZARD WARNING LIGHT SWITCH
- (7) CRUISE CONTROL SWITCH (HST TYPE)
- (8) PTO SWITCH
- (9) GRILLE WORK LIGHT SWITCH (IF FITTED)
- (10) CLUTCH PEDAL (MECHANICAL)
- (11) SHUTTLE LEVER (MECHANICAL)
- (12) THROTTLE LEVER
- (13) THROTTLE PEDAL (MECHANICAL)
- (14) BRAKE PEDALS
- (15) HST FORWARD/REVERSE PEDAL (HST TYPE)
- LEFT / RIGHT-HAND CONTROLS
- (1) MAIN GEAR SHIFT LEVER (MECHANICAL)
- (2) DIFFERENTIAL LOCK PEDAL
- (3) REAR WORK LIGHT SWITCH
- (4) RANGE GEAR SHIFT LEVER
- (5) PTO GEAR LEVER (IF FITTED)
- (6) MIDDLE PTO LEVER (IF FITTED)
- (8) PARKING BRAKE LEVER
- HYDRAULIC SYSTEM
- (1) SAFETY PRECAUTIONS
- (2) STEERING SYSTEM
- (3) HYDRAULIC LIFT CONTROL
- (4) DOWN SPEED CONTROL KNOB
- (5) REMOTE CONTROL LEVER AND QUICK COUPLER (OPTIONAL)
- (6) JOYSTICK LEVER (OPTIONAL)
- (7) HYDRAULIC SYSTEM DIAGRAM
- OPERATION AND WORK
- ENGINE START AND (1) ENGINE START
- (2) START IN COLD WEATHER
- (3) ENGINE STOP
- HOW TO DRIVE AND HOW TO STOP
- (1) HOW TO DRIVE
- (2) CHANGING SPEED
- (3) EMERGENCY STOP
- (4) STOPPING TRACTOR
- (5) DRIVING TRACTOR ON THE ROAD
- (6) PARKING
- HOW TO HANDLE NEW
- (1) CHECK POINTS
- (2) NOTICES IN HANDLING NEW TRACTOR
- ATTACHING IMPLEMENT
- (1) 3-POINT LINKAGE
- (2) POWER TAKE-OFF (PTO) SHAFT
- (3) HITCH AND DRAWBAR (OPTIONAL)
- (4) 7-POLE CONNECTOR (OPTIONAL)
- (5) TECHNICALLY MAXIMUM PERMISSIBLE MASS
- (6) TIRES AND LOAD CAPACITY
- (7) ADJUSTING WHEEL TRACKS AND TIRE REPLACEMENT
- (8) USING FRONT-END LOADER (OPTIONAL)
- (9) ADJUSTING STEERING ANGLE
- (10) RECOMMENDED MAXIMUM SPECIFICATION OF IMPLEMENTS
- DRIVING SPEED
- LUBRICATION AND MAINTENANCE 5-1. ACCESS FOR MAINTENANCE
- MAINTENANCE CHART
- LUBRICANTS AND CAPACITY
- FIRST 50 HOUR CHECK
- CHECK BEFORE STARTING (DAILY CHECK)
- (1) ENGINE OIL
- (2) FUEL TANK
- (3) INSTRUMENT PANEL & INDICATORS
- (4) TURN SIGNAL LIGHTS, LIGHTS AND HORN
- (5) ENGINE COOLANT
- (6) AIR CLEANER (DRY TYPE)
- (7) CLEANING OF RADIATOR AND RADIATOR SCREEN
- (8) TIRE AIR PRESSURE AND DAMAGE
- (9) TIGHTENING STATE OF BOLTS AND NUTS OF EACH PART
- (10) ADJUSTMENT OF CLUTCH PEDAL PLAY
- (11) ADJUSTING HST CONTROL LINKAGE (HST TYPE)
- (12) ADJUSTMENT OF BRAKE PEDAL PLAY
- FIRST 50 HOUR
- (1) LUBRICATING GREASE NIPPLE
- (2) CLEANING OF RADIATOR AND RADIATOR SCREEN
- (3) CHECKING TRANSMISSION OIL
- (4) CHECKING FRONT AXLE OIL
- (5) BATTERY CHECK
- (7) HYDRAULIC HOSES AND LEAKAGE
- EVERY 300 HOUR
- (1) REPLACING ENGINE OIL AND FILTER
- (2) REPLACING HYDRAULIC OIL FILTER
- (3) TENSION ADJUSTMENT OF FAN BELT
- (4) REPLACING AIR CLEANER ELEMENT (DRY TYPE)
- EVERY 600 HOUR
- (1) CHANGING FRONT AXLE OIL
- (2) CHANGING TRANSMISSION OIL
- (3) REPLACING FUEL FILTER CARTRIDGE
- (4) ADJUSTING ENGINE VALVE CLEARANCE
- (5) CHECKING NOZZLE INJECTION PRESSURE
- EVERY 2-YEAR
- (1) REPLACEMENT OF ENGINE COOLANT
- GENERAL MAINTENANCE (WHEN REQUIRED)
- (1) AIR-BLEEDING FROM FUEL SYSTEM
- (2) FUSE & MAIN FUSE
- (3) BATTERY HANDLING AND NOTICES
- TROUBLESHOOTING
- DIMENSION AND SPECIFICATION
Inside this manual
Real pages from this operator's manual (129 pages). Open the sample pages (PDF, 667 KB)
- Controls and operation, page 36: 3. Instruments and Controls
- Specifications, page 84: (10) Recommended maximum specification of implements
- Maintenance, page 93: - Replace engine oil filter. (⇒Refer to Every 300 hour check. See page 5-18)
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 129 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).