New Holland DC75, DC85, DC95 Crawler Operator's Manual
142 pages · Publication 6-39550
Added to your cart. View cart
What's inside
From the manual's own table of contents: 113 topics. See sample pages (PDF, 377 KB)
- CHAPTER
- GENERAL INFORMATION
- TO THE OWNER
- RIGHT, LEFT, FRONT, AND REAR OF THE MACHINE
- IDENTIFICATION NUMBERS
- MACHINE COMPONENTS
- SAFETY, DECALS, AND HAND SIGNALS
- SAFETY RULES
- BEFORE OPERATION
- PERSONAL SAFETY
- UTILITY SAFETY
- MACHINE OPERATION
- PARKING THE MACHINE
- FIRE EXTINGUISHER
- BURN PREVENTION
- HAZARDOUS CHEMICALS
- FIRE OR EXPLOSION PREVENTION
- MAINTENANCE DUCTILE IRON
- SAFETY DECALS
- INSTRUMENTS AND CONTROLS
- INSTRUMENT AND CONTROLS
- BRAKE, DECELERATOR AND FOOTREST
- PARKING BRAKES
- DIRECTION CONTROL LEVER,TRANSMISSION CONTROL, HAND THROTTLE
Show all 113 topics
- DOZER BLADE CONTROL LEVER
- CONTROL HANDLE POSITIONS
- RIPPER CONTROL LEVER
- OPERATORS SEAT
- OPERATORS SEAT BELT
- OPERATING INSTRUCTIONS
- ENGINE OPERATION
- CRAWLER OPERATION
- MOVING A DISABLED CRAWLER
- TRANSPORTING THE MACHINE
- OPERATING IN HOT WEATHER
- OPERATING IN COLD WEATHER
- BOOSTER BATTERY CONNECTION TO MACHINE BATTERY
- TILTING THE CAB
- DOZER OPERATION
- TRACK SYSTEMS
- FACTORS CONTROLLING UNDERCARRIAGE WEAR
- ISSUED 08-04 BUR I
- LUBRICATION, FILTERS AND FLUIDS
- LUBRICATION ANALYSIS PROGRAM
- PLASTIC AND RESIN PARTS
- ENGINE HOURMETER
- FLUIDS AND LUBRICANTS
- LUBRICATION AND MAINTENANCE CHART
- GREASE FITTINGS
- ACCESS DOORS
- ENGINE LUBRICATION
- ENGINE SERVICE
- AIR FILTER SYSTEM
- ENGINE COOLING SYSTEM
- DIESEL FUEL SYSTEM
- HYDRAULIC SYSTEM
- TRANSMISSION
- FINAL DRIVES
- MAINTENANCE AND ADJUSTMENTS
- REVERSIBLE FAN POSITIONS (IF EQUIPPED)
- PROTECTIVE STRUCTURE
- MACHINE CLEANING
- ADJUSTING THE RIPPER SHANKS
- DOZER BLADE PITCH ADJUSTMENT (IF EQUIPPED)
- FIRE EXTINGUISHER MOUNTING (IF EQUIPPED)
- FAN AND AIR CONDITIONING DRIVE BELT
- MACHINE STORAGE
- ELECTRICAL
- ELECTRICAL SYSTEM
- FUSES AND RELAYS
- INSTRUMENT CLUSTER
- SPECIFICATIONS
- TRACK SYSTEM
- TRANSPORT LENGTH AND WIDTH WITH BLADE FULLY ANGLED 25 DEGREES
- OPERATING DATA AND DIMENSIONS
- OPERATING DATA AND DIMENSIONS - RIPPER
- WEIGHTS
- INSTRUMENT PANEL
- SEAT CONTROLS
- TO FASTEN
- TO RELEASE
- PERIOD OF A NEW MACHINE
- BRAKE PEDAL
- TRACK SHOE BOLTS
- INSPECTION
- STARTING THE ENGINE
- ENGINE SPEED
- PARKING THE MACHINE AND STOPPING THE ENGINE
- BEFORE YOU START EACH DAY
- DIRECTION CONTROL LEVER
- TURNING
- STEERING GRADUAL TURN
- POWER TURN
- COUNTER-ROTATION
- ADJUSTING STEERING SENSITIVITY
- TRANSMISSION SPEED CONTROLS
- DECELERATOR PEDAL
- ONBOARD DIAGNOSTICS AND COMPUTER OPERATION
- DIGITAL DISPLAY AND DISPLAY
- ACTIVATING THE SERVICE REMINDER TO (AUTO)
- ACTIVATING THE SERVICE REMINDER TO (MANUAL)
- SETTING THE NEXT SERVICE TO (NONE)
- CLIMATE CONTROL SYSTEM
- OPENING THE PRESSURE RELIEF VALVES
- RELEASING THE BRAKES
- LIFTING THE
- ENGINE STARTING AIDS
- ENGINE COOLANT HEATER (IF EQUIPPED)
- ENGINE OIL HEATER (IF EQUIPPED)
- LOWERING THE ROPS CAB OR
- BLADE PITCH (OPTIONAL)
- COMPONENTS OF THE UNDERCARRIAGE
- WEAR FACTORS YOU CAN CONTROL
Inside this manual
Real pages from this operator's manual (142 pages). Open the sample pages (PDF, 375 KB)
- Controls and operation, page 28: CHAPTER 3 - INSTRUMENTS AND CONTROLS
- Maintenance, page 96: CHAPTER 5 - LUBRICATION, FILTERS, AND FLUIDS
- Specifications, page 134: CHAPTER 8 - SPECIFICATIONS
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 142 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).