New Holland E80BMSR Hydraulic Excavator Operator's Manual
252 pages · Publication S2LF00013ZE01
Added to your cart. View cart
- Models
- E80BMSR
- Serial coverage
- from PIN LF06-04501 and higher
- Manual type
- Operator's Manual
- Pages
- 252
- Publication
- S2LF00013ZE01
- Condition
- Brand new
What's inside
From the manual's own table of contents: 132 topics. See sample pages (PDF, 521 KB)
- GENERAL INFORMATION
- TO THE OWNER
- RIGHT, LEFT, FRONT, AND REAR OF THE MACHINE
- MACHINE COMPONENTS
- IDENTIFICATION NUMBERS
- CHAPTER
- SAFETY, DECALS, AND HAND SIGNALS
- SAFETY RULES
- PERSONAL SAFETY
- OPERATOR PRECAUTIONS
- DECALS
- LOCATION OF WARNING LABELS AND DECALS
- HAND SIGNALS
- INSTRUMENTS AND CONTROLS
- OPERATOR CAB
- OPERATOR SEAT
- OPERATOR CAB CONTROLS AND ACCESSORIES
- OPERATING INSTRUCTIONS
- BEFORE OPERATING THE MACHINE
- OPERATING THE MACHINE
- STARTING AND STOPPING ENGINE
- MACHINE WARM UP
- OPERATING AND TRAVEL CONTROLS DECAL
- MACHINE OPERATION
Show all 132 topics
- MACHINE ATTACHMENT AND SWING CONTROLS
- PRACTICES TO IMPROVE EFFICIENCY
- OPTIONAL EQUIPMENT
- PROHIBITED WORK IN USE OF BREAKER
- PROHIBITED WORK IN USE OF NIBBLER
- PRECAUTION FOR BREAKERS FROM DIFFERENT MANUFACTURERS
- USE OF AN ACCUMULATOR
- PROPORTIONAL HAND CONTROL (EXTRA, NIBBLER, AND BREAKER)
- PROPORTIONAL HAND CONTROL (NIBBLER AND BREAKER)
- PROPORTIONAL HAND CONTROL (EXTRA)
- HANDLING SUSPENDED LOADS
- TRANSPORTATION
- TRANSPORTING THE MACHINE
- SECURING THE MACHINE
- LIFTING THE MACHINE
- INSTALLATION AND REMOVAL OF MIRRORS
- MACHINE STORAGE
- GENERAL SAFETY
- LUBRICANT, FUEL AND COOLANT SPECIFICATIONS
- MAINTENANCE PARTS
- INSPECTION AND MAINTENANCE CHART
- WHEN REQUIRED MAINTENANCE DAILY (8 HOUR) INSPECTION AND MAINTENANCE 50 HOUR (WEEKLY) MAINTENANCE 100 HOUR MAINTENANCE 12
- ELECTRICAL
- FUSES AND RELAY BOX
- FUSIBLE LINK (FOR STARTER)
- MECHATRO-CONTROLLER (CPU) AND ENGINE
- BATTERY
- ALTERNATOR
- STARTER MOTOR
- SPECIFICATIONS
- GENERAL SPECIFICATIONS
- SHOE TYPES
- WORKING RANGES
- BUCKET AND ARM COMBINATIONS
- LIFTING CAPACITIES
- TORQUE SPECIFICATIONS
- SAFETY AREA
- UTILITY SAFETY
- PERSONNEL
- GENERAL
- MOUNTING AND DISMOUNTING PRECAUTIONS
- STARTING AND STOPPING PRECAUTIONS
- OPERATING PRECAUTIONS
- MAINTENANCE PRECAUTIONS
- FUEL HANDLING PRECAUTIONS
- BURN PREVENTION
- HAZARDOUS CHEMICAL PRECAUTIONS
- TRANSPORTING PRECAUTIONS
- PROTECTIVE STRUCTURE (IF EQUIPPED)
- SEAT BELT PRECAUTIONS
- EMERGENCY EXIT HAMMER
- FIRE EXTINGUISHER
- FIRE PREVENTION
- SPECIFIC PRECAUTIONS TO THIS MACHINE
- DO NOT USE COUNTERWEIGHT LIFTING EYES DECAL
- WORKING ABOVE GROUND DECAL
- PRESSURIZED HOT OIL DECAL
- SWING DECAL
- BOOSTER CABLE DECAL
- BATTERY CABLE DECAL
- HOT COOLANT DECAL
- ENGINE STOP DECAL
- ROTATING AND HOT PARTS DECAL
- HOT PARTS DECAL
- ADJUSTING TRACK TENSION DECAL
- HOT PARTS DECAL
- HANDLING BATTERY
- PREVENT BATTERY EXPLOSIONS DECAL
- HANDLING BATTERY DECAL
- CALIFORNIA PROPOSITION 65 DECAL
- HANDLING BATTTERY DECAL
- HANDLING GREASE GUN DECAL
- TRAVEL SPEED, ADJUSTING TRACK TENSION, LEAVING MACHINE, READ OPERATOR'S MANUAL, POWER BOOST SWITCH
- ENGINE STOP, BUCKET TO CAB CONTACT, ELECTRICAL POWER LINES LEAVING MACHINE DECAL
- DO NOT INSERT HAND IN THE MOVING PART DECAL
- LOCK FRONT WINDOW AT THE HOUSED POSITION DECAL
- SWING BRAKE RELEASE SWITCH DECAL
- OPERATION BY FOOT PEDAL DECAL
- HANDLING CHANGE LEVER AND SELECTOR VALVE DECAL
- DOCUMENT STORAGE COMPARTMENT
- LOCKING/UNLOCKING CAB DOOR
- RELEASING DOOR LOCK FROM INSIDE
- OPENING AND CLOSING FRONT WINDOW
- REMOVING AND STORING LOWER FRONT WINDOW
- CAB DOME LIGHT
- EMERGENCY ESCAPE
- CUP HOLDER
- GREASE GUN HOLDER
- SEAT FRONT AND REAR HEIGHT ADJUSTMENT
- SEAT BACK RECLINING ADJUSTMENT
- ARMREST ADJUSTMENT
- CONTROL LEVER STAND ADJUSTMENT
- SEAT BELT
- LEVERS AND PEDALS
- GAUGE CLUSTER
- LCD DISPLAY
- BATTERY CHARGING SYSTEM DISPLAY
- NIBBLER AND BREAKER MODE DISPLAY
- SWITCH AND METER LOCATIONS
- RADIO
- CLOCK
- ANTENNA
- CLIMATE CONTROL SYSTEM/AIR CONDITIONER
- CAP FOR OPTIONAL SWITCH
- VOLT POWER SUPPLY
- HORN SWITCH
- HOUR METER
- SWING PARKING BRAKE RELEASE SWITCH
Inside this manual
Real pages from this operator's manual (252 pages). Open the sample pages (PDF, 519 KB)
- Specifications, page 22: CHAPTER 2 - SAFETY, DECALS, AND HAND SIGNALS
- Controls and operation, page 121: CHAPTER 4 - OPERATING INSTRUCTIONS
- Maintenance, page 184: 250 HOUR MAINTENANCE
- Color page, page 107: CHAPTER 4 - OPERATING INSTRUCTIONS
- Color page, page 41: CHAPTER 3 - INSTRUMENTS AND CONTROLS
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the E80BMSR are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 252 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).