New Holland EH30.B, EH35.B Mini Excavator Operator's Manual
128 pages · Publication 87054147
Added to your cart. View cart
What's inside
From the manual's own table of contents: 126 topics. See sample pages (PDF, 341 KB)
- CHAPTER
- GENERAL INFORMATION
- TO THE OWNER
- IDENTIFICATION NUMBERS
- SAFETY, AND DECALS
- SAFETY RULES
- PERSONAL SAFETY
- SAFETY AREA
- UTILITY SAFETY
- OPERATOR PRECAUTIONS
- SAFETY DECALS
- INSTRUMENTS AND CONTROLS
- CAB (IF EQUIPPED)
- STEPS AND ACCESS HANDLES
- OPERATOR'S COMPARTMENT CONTROLS AND ACCESSORIES
- INSTRUMENT PANEL
- SWITCHES
- CONTROL LEVERS
- ACCESS COVERS AND OPERATOR'S SEAT ADJUSTMENT
- SEAT BELT
- OPERATING INSTRUCTIONS
- BEFORE OPERATING THE MACHINE
- OPERATING THE MACHINE
- PERIOD
Show all 126 topics
- STARTING THE
- BRINGING THE MACHINE UP TO OPERATING TEMPERATURE
- ENGINE OPERATION
- STOPPING THE ENGINE
- OPERATING THE MACHINE IN COLD WEATHER
- OPERATING THE MACHINE IN HOT WEATHER
- OPERATION
- MACHINE TRAVEL
- TRANSPORTING THE MACHINE
- OPERATING THE MACHINE IN WATER
- PARKING THE MACHINE
- OPERATING THE MACHINE ON SLOPING GROUND
- MOVING A DISABLED MACHINE
- LOWERING THE ATTACHMENT IN THE EVENT OF A MACHINE FAILURE
- OPERATING THE BUCKET
- MACHINE STORAGE
- LUBRICATION, FILTERS, AND FLUIDS
- SERVICING INSTRUCTIONS
- PERSONNEL
- GENERAL
- MOUNTING AND DISMOUNTING PRECAUTIONS
- STARTING AND STOPPING PRECAUTIONS
- OPERATING PRECAUTIONS
- MAINTENANCE PRECAUTIONS
- FUEL HANDLING PRECAUTIONS
- BURN PREVENTION
- HAZARDOUS CHEMICAL PRECAUTIONS
- TRANSPORTING PRECAUTIONS
- PROTECTIVE STRUCTURE
- FIRE EXTINGUISHER
- SEAT BELT PRECAUTIONS
- SPECIFIC PRECAUTIONS TO THIS MACHINE
- DECALS
- CAB DOOR
- WINDSHIELD
- FRONT WINDSHIELD (LOWER)
- WINDOW (RIGHT-HAND SIDE)
- CAB LAMP
- WINDSHIELD WASHER FLUID
- ACCESS COVERS AND GUARDS
- OPENING
- LOCKING
- OPERATOR'S SEAT ADJUSTMENT
- FASTENING AND UNFASTENING
- AFTER THE FIRST 50 HOURS
- AFTER THE FIRST 500 HOURS
- STARTING THE ENGINE
- BRINGING THE ENGINE UP TO OPERATING TEMPERATURE
- BRINGING THE HYDRAULIC FLUID UP TO OPERATING TEMPERATURE
- BATTERY
- FUEL
- ENGINE OIL
- HYDRAULIC FLUID
- COOLANT SOLUTION
- FORWARD, REVERSE, AND STOPPING
- RIGHT-HAND TURN (FORWARD TRAVEL)
- TURN (FORWARD TRAVEL)
- TURN (REVERSE TRAVEL)
- RIGHT-HAND TURN (REVERSE TRAVEL)
- RIGHT-HAND PIVOT TURN
- PIVOT TURN
- BY RAIL
- ON A TRUCK OR TRAILER
- LIFTING PROCEDURES FOR THE MACHINE
- FILLING
- EXCAVATING METHOD
- PREPARATION FOR STORAGE
- PERIODICAL CHECKS
- STARTING UP AFTER STORAGE
- HOURMETER
- FLUIDS AND LUBRICANTS
- CAPACITIES AND SPECIFICATIONS
- TRANSMISSION COMPONENT OIL
- GREASE
- ENVIRONMENT
- DAILY INSPECTIONS
- LUBRICATION AND MAINTENANCE CHART
- GREASE FITTINGS AND LUBRICATION POINTS
- MACHINE POSITION FOR LUBRICATION
- LUBRICATION - AS REQUIRED
- LUBRICATION - 50 HOURS
- LUBRICATION - 250 HOURS
- LUBRICATION - 2000 HOURS
- SERVICE SPECIFICATIONS
- ENGINE OIL LEVEL
- ENGINE OIL AND FILTER CHANGE
- COOLING SYSTEM
- CLEANING RADIATOR CORES
- RADIATOR CAP
- COOLANT LEVEL
- CHECKING COOLING SYSTEM HOSES AND CLAMPS
- DRAINING THE COOLING SYSTEM
- CLEANING THE COOLING SYSTEM
- FILLING THE COOLING SYSTEM
- FUEL SYSTEM
- CHECKING FUEL LEVEL
- FILLING THE FUEL TANK
- BLEEDING AIR FROM THE FUEL SYSTEM
- DRAINING AND CLEANING THE WATER SEPARATOR
- REPLACING THE FUEL FILTER
- DRAINING THE FUEL TANK
- RELEASING PRESSURE IN THE HYDRAULIC SYSTEM
Inside this manual
Real pages from this operator's manual (128 pages). Open the sample pages (PDF, 340 KB)
- Controls and operation, page 38: CHAPTER 3 - INSTRUMENTS AND CONTROLS
- Specifications, page 54: CHAPTER 4 - OPERATING INSTRUCTIONS
- Maintenance, page 70: Lubricating the Turntable (Swing) Bearing
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 128 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).