Skyjack SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT Rough Terrain Scissor Lift Operation Manual
123 pages · Publication 221491AHA
Added to your cart. View cart
What's inside
From the manual's own table of contents: 9 sections, 133 entries. See sample pages (PDF, 517 KB)
Section 1 – About this Mobile Elevating Work Platform (MEWP)15 topics
- Read and heed
- 1.1-1 Mobile Elevating Work Platform (MEWP) definition
- 1.1-2 Purpose of equipment
- 1.1-3 Use of equipment
- 1.1-4 Operation manual
- 1.1-5 Operator
- 1.1-6 Service policy and warranty
- 1.1-7 Ownership of MEWP
- 1.1-8 Optional equipment
- 1.1-9 Scope of this manual
- Primary assemblies
- Serial number nameplate
- Maintenance responsibility
- 1.4-1 Operator
- 1.4-2 Maintenance and inspection schedule
Section 2 – General Safety Precautions5 topics
- Electrocution hazards
- 2.1-1 Minimum distance from electrical conductors
- Safety instructions
- Fall-protection
- Worksite inspection
Section 3 – Familiarization28 topics
- Overview of the MEWP
- Manual storage box
- Control functions
- 3.3-1 Main power disconnect switch
- 3.3-2 Base control console
- 3.3-3 Platform control console
- 3.3-4 Engine control console
- Features and devices
- 3.4-1 Lowered travel position and elevated travel position
- 3.4-2 Drive speed
- 3.4-3 Tilt switch
- 3.4-4 Brake release system
- 3.4-5 Freewheeling valve
- 3.4-6 Emergency-lowering system
- 3.4-7 Fall-protection anchorage
- 3.4-8 Platform load-sensing system
- 3.4-9 Maintenance support(s)
- 3.4-10 Propane cylinder (optional equipment)
- 3.4-11 Auto-level system (optional equipment)
- General components
- 3.5-1 AC power socket on the platform
- 3.5-2 Folding-guardrail system
- 3.5-3 Extension platform(s)
- 3.5-4 Motion alarm
- Optional equipment
- 3.6-1 Secondary Guarding Lift Enable (SGLE) push-button
- 3.6-2 Elevate™ telematics - access control unit
- 3.6-3 Cold Weather Start Kit Operation
Section 4 – Inspections Before Operation31 topics
- Operator’s responsibility
- Visual and daily maintenance inspections
- 4.2-2 Electrical
- 4.2-3 Hydraulic
- 4.2-4 Wheel/tire assembly
- 4.2-6 Hydraulic and base control side
- 4.2-8 Fuel tank side
- 4.2-9 Engine side
- 4.2-10 Platform assembly
- 4.2-11 Lift mechanism
- Function tests
- 4.3-1 Do a test of the main power disconnect switch
- 4.3-2 Do a test of the control module and load sensing module self-check
- 4.3-3 Do a test of the emergency-stop button on the base
- 4.3-4 Do a test of the off/base/platform key switch
- 4.3-5 Do a test of the base lift enable switch
- 4.3-6 Do a test of the emergency-lowering function
- 4.3-7 Do a test of the emergency-stop button on the platform
- 4.3-8 Do a test of the function-enable switch
- 4.3-9 Do a test of the steer function
- 4.3-10 Do a test of the drive function
- 4.3-11 Do a test of the anti-tiedown function
- 4.3-12 Do a test of the brakes
- 4.3-13 Do a test of the platform raise and lower functions
- 4.3-14 Do a test of the horn
- 4.3-15 Do a test of the elevated travel speed
- 4.3-16 Do a test of the outrigger interlocks (optional equipment)
- 4.3-17 Do a test of the generator (optional equipment)
- 4.3-18 Do a test of the SGLE switch (optional equipment)
- 4.3-19 Do a test of the positive air shutoff (optional equipment)
- Operator’s checklist
Section 5 – Operation13 topics
- Energize the base control console
- Raise or lower the platform with the base control console
- Energize the platform control console
- Raise or lower the platform with the platform control console
- Drive forward or rearward
- Steer
- Select the level-drive or inclined-drive mode
- Extend/retract the extension platform(s)
- Use the auto-level (optional equipment)
- Start and stop the generator (optional equipment)
- Raise and lower with the SGLE platform control console (optional equipment)
- Engage or disengage the differential lock
- MEWP shutdown
Section 6 – Additional Procedures18 topics
- Use the emergency-lowering function
- Push, Winch and Tow the MEWP
- Use the platform control console from the ground
- 6.3-1 Disconnect and remove the platform control console
- 6.3-2 Operate the MEWP from the ground
- Refuel
- 6.4-1 Refuel the MEWP with diesel or gasoline
- 6.4-2 Replace the propane cylinder (optional equipment)
- Move the MEWP for transport
- 6.5-1 Hoist the MEWP
- 6.5-2 Drive and tie-down the MEWP
- Use the maintenance support(s)
- 6.6-1 Deploy the maintenance support(s)
- 6.6-2 Store the maintenance support(s)
- Fold the guardrail
- 6.7-1 Fold the guardrail system down
- 6.7-2 Unfold the guardrail system
- Move the MEWP through a doorway
Section 7 – Specifications6 topics
- Standard and optional equipment
- Owner’s annual inspection record
- Specifications
- Environment
- Maximum platform capacities (evenly distributed)
- Floor loading pressure
Section 8 – Labels8 topics
- Base control labels
- Platform control labels
- 8.3-3 Right side
- 8.3-4 Front side
- 8.3-5 Engine compartment
- 8.3-6 Outriggers
- 8.3-7 Fall-protection anchorages
- 8.3-8 Cold/Arctic Package
Inside this manual
Real pages from this operation manual (123 pages). Open the sample pages (PDF, 515 KB)
- Controls and operation, page 63: Section 5 – Operation
- Maintenance, page 77: Section 6 – Additional Procedures
- Specifications, page 88: Floor loading pressure
- Color page, page 18: SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT
- Color page, page 90: SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 123 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).