Snorkel MHP14AT, MHP13AT Towable Boom Lift Operator's Manual
78 pages · Publication 13225A
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Added to your cart. View cart
What's inside
From the manual's own table of contents: 101 sections, 330 entries. See sample pages (PDF, 847 KB)
Electrical Hazard2 topics
- Electrical Hazard Warning i
- Minimum Safe Approach Distance ii
Introduction10 topics
- Standard MHP14AT / MHP13AT iii
- Options iii
- Operation Manual iii
- Photographs iii
- Safety Alerts iii
- Operation iv
- Maintenance iv
- Responsibilities of Parties iv
- In summary v
- Additional Information v
Safety16 topics
- Safe Operation 1-1
- Electrocution Hazards 1-1
- Minimum safe approach distance 1-1
- Pre-start Inspection 1-2
- Work Place Inspection and Practices 1-2
- Operation 1-3
- Tipover and Falling Hazards 1-3
- General Safety Precautions 1-4
- Hydraulic System Precautions 1-4
- Fire Prevention 1-4
- Engine and Fuel Handling Precautions 1-4
- Batteries 1-4
- Height Restriction 1-5
- Height Restriction on MHP13AT 1-5
- Metre Restriction Kit 1-5
- Safety Decals and Placards 1-5
Safety Devices15 topics
- Safety Device Information 2-1
- Emergency Stop Switches 2-1
- At ground control box 2-1
- At platform control box 2-1
- Other Safety Devices 2-1
- Lanyard anchor points 2-1
- Gravity gate 2-2
- Guardrails 2-2
- Height restriction on MHP13AT 2-2
- 10.9m height restriction kit (Option) 2-2
- Enable switch 2-2
- Enable switch (foot) - Optional 2-3
- Bubble level 2-3
- RCD/ELCB AC outlet (Option) 2-3
- Flashing light (Option) 2-3
Specifications6 topics
- General Specifications 3-1
- Specifications MHP14AT 3-1
- Specifications MHP13AT 3-2
- Engine Data 3-3
- Working Envelope - MHP14AT, MHP13AT 3-4
- Nomenclature 3-5
Gauges3 topics
- Hourmeter 4-1
- Level Bubble 4-1
- Hydraulic Oil Level 4-1
Shut-offs and Circuit Breakers3 topics
- RCD/ELCB Outlet (option) 5-1
- Main Circuit Breaker 5-1
- Stabilisers 5-1
Controls8 topics
- Controls Description 6-1
- Controls and Control Decal Locations 6-1
- Ground Control Box 6-2
- Lower controls / indicators: 6-2
- Platform Control Box 6-3
- Upper controls / indicators: 6-3
- Stabiliser Controls (Manual) 6-5
- Self Levelling Stabilisers (Option) 6-6
Pre-operational Inspection30 topics
- Pre-operational Inspection Table 7-1
- Engine Fuel Level 7-2
- Fuel Tank Cap 7-2
- Fuel Leaks 7-2
- Engine Oil Level 7-2
- Operator's Manual 7-2
- Wiring Harnesses 7-2
- Battery Terminals 7-3
- Battery Fluid Level 7-3
- Hydraulic Oil Level 7-3
- Hydraulic Oil Leaks 7-3
- Bolts and Fasteners 7-4
- Wheels and Tyres 7-4
- Tyre Pressure 7-4
- Structural Damage and Welds 7-5
- Lanyard Anchor Points 7-5
- Platform Gravity Gate 7-5
- Platform Guardrails 7-5
- Platform Access Ladder 7-5
- Flashing Light (option) 7-6
- Ground Control Switches 7-6
- Emergency Lower 7-6
- Ground Station 7-6
- Upper control box 7-6
- Platform Control Switches 7-7
- AC Outlet RCD/ELCB (option) 7-7
- Placards and Decals 7-7
- Standard placards and decals 7-7
- Decal list 7-8
- Decal inspection drawing 7-9
Operation17 topics
- Operating Procedures 8-1
- Control Stations 8-1
- Emergency Stopping 8-1
- Operation Considerations 8-1
- Stabiliser Operation 8-1
- Using the manual stabiliser valves 8-2
- Raising the manually operated stabilisers 8-2
- Self levelling stabilisers (Optional) 8-3
- Setting the stabilisers manually 8-3
- Unlocking the boom 8-3
- Starting From Ground Control Box 8-3
- Starting From Platform Control Box 8-4
- Moving The Platform 8-5
- From ground control box 8-5
- From platform control box 8-5
- Rotating the platform 8-6
- Securing for Day 8-6
Emergency Operation3 topics
- Emergency Operation Procedures 9-1
- Operation from platform control box 9-1
- Operation from ground control position 9-2
Stowing and Transporting5 topics
- Stowing 10-1
- The correct stowed position is shown here. 10-1
- Transporting 10-1
- Trailering 10-1
- Securing to a Transport Vehicle 10-1
Options27 topics
- Bi-Energy, Petrol/Diesel / 24V DC 11-1
- DC motor operation 11-1
- DC motor battery switch 11-1
- Setting the manual stabilisers 11-1
- Setting the automatic stabilisers 11-1
- Operation 11-2
- Batteries 11-2
- Battery charger 11-2
- Batteries - general maintenance 11-3
- Batteries - charging 11-3
- Bi-Energy, Petrol/Diesel / 240V AC 11-3
- AC motor operation 11-3
- AC power connection 11-4
- Operation 11-4
- Bi-Energy, Hydraulic Oil Tank 11-4
- Other Options 11-4
- Air Line To Platform 11-4
- Work Lights 11-4
- Flashing Light 11-4
- Battery Isolate Switch 11-4
- Alternative Power Options 11-4
- RCD/ELCB AC Outlet 11-4
- Self Levelling Stabiliser 11-5
- Spare Wheel 11-5
- Platform Foot Switch 11-5
- Metre Height Restriction Kit 11-5
- Platform Overload Protection 11-6
Fire Fighting and Chemical Control1 topic
- Hazardous Components 12-1
Operator's Troubleshooting2 topics
- Troubleshooting 13-1
- Operator Troubleshooting Chart 13-1
Appendix A. Glossary
metre restriction kit, 1-5
10.9m height restriction kit, 2-2
AC outlet RCD/ELCB, 7-7
Automatic Shut-offs3 topics
- Circuit Breakers
- Main Circuit Breaker, 5-1
- Stabilisers, 5-1
Automatic Stabilisers, 8-31 topic
- Setting Manually, 8-3
Battery fluid level, 7-3
Battery terminals, 7-3
Bolts and fasteners, 7-4
Show all 101 sections
Booms Identification, 3-5
Controls17 topics
- Control switches
- Booms/Stabiliser Selector, 8-4
- Emergency Lower, 6-4
- Enable Foot (option), 6-4
- Enable switch, 6-4
- Height Lockout, 6-3
- Lift Enable, 6-3
- Lift enable indicator, 6-4
- Master Key Switch, 7-1
- Platform/Ground Selector, 6-2, 8-3, 9-1
- Stabliser / Boom Secector Switch, 6-2
- Emergency Lower, 6-3
- Ground Control Box, 6-2
- Control switches, 6-2
- Platform Control Box
- Control switches, 6-3
- Platform Rotator, 6-5, 8-6
Controls and Control Decals Locations, 6-1
Electrical1 topic
- Electrocution, 1-3, 8-1
Electrical Hazard Warning1 topic
- see Electrical Hazard - page i
Emergency lower, 7-6
Emergency Lower Control, 6-3
Emergency Lowering From Ground2 topics
- Manual Valve Lower Boom, 9-2
- Manual Valve Upper Boom, 9-2
Emergency Operation, 9-13 topics
- Operation From Ground Control Box, 9-2
- Operation From Platform Control Box, 9-1
- Procedures, 9-1
Engine11 topics
- Cooling system, 3-3
- Displacement, 3-3
- Engine oil level, 7-2
- Fuel consumption, 3-3
- Fuel grade, 3-3
- Fuel leaks, 7-2
- Fuel Level, 7-2
- Fuel tank cap, 7-2
- Ignition system, 3-3
- Oil capacity, 3-3
- Oil grade, 3-3
Engine data, 3-3
Falling hazards, 1-3
Flashing light, 7-6
Gauges3 topics
- Hourmeter, 4-1
- Hydraulic Oil Level, 4-1
- Level Bubble, 4-1
General Specifications, 3-1
Ground Control Box, 6-2
Ground Control Switches, 7-6
Ground station, 7-6
Hazardous Components, 12-1
Hourmeter, 4-1
Hydraulic oil1 topic
- Filler cap, 7-3
Hydraulic oil leaks, 7-3
Hydraulic oil level, 7-3
Hydraulic Oil Level, 4-1
Inspection2 topics
- Operators pre-operational inspection, 7-1
- Inspection and Maintenance Table, 7-1
Insulation rating, 3-1, 3-2
Left side view of machine, 3-6
Level Bubble, 4-1
Light Flashing, 7-6
Main Circuit Breaker, 5-1
manual of responsibilities, A-iv
Manual Stabiliser Valves, 8-2
Maximum height to basket floor, 3-1, 3-2
Maximum outreach, 3-1, 3-2
Maximum rated axle capacity, 3-1, 3-2
Maximum towing speed, 3-1, 3-2
Minimum Safe Approach Distance1 topic
- see Electrical Hazard - page ii
Nomenclature And Serial Numbers, 3-5
Operating Procedures, 8-15 topics
- Control Stations, 8-1
- Emergency Stopping, 8-1
- Moving The Platform, 8-5
- Starting From Ground Control Box, 8-1
- Starting From Platform Control Box, 8-4
Operation, 8-1
Operators
Operator's Manual, 7-2
Other Safety Devices, 2-1
Placards and decals, 7-71 topic
- Standard placards and decals, 7-7
Platform1 topic
- Lanyard anchor points, 7-5
Platform Control Switches, 7-7
Platform Gravity Gate, 7-5
Platform Guardrails, 7-5
Pre-operational Inspection Table, 7-1
Pre-start Inspection, 1-2
RCD/ELCB Outlet (option), 5-1
Right side view of machine, 3-5
Safe Operation, 1-1
Safe working load, 3-1, 3-2
safety alerts, A-iii
Safety Decals and Placards, 1-5
Safety Devices10 topics
- Bubble level, 2-3
- Emergency Stop Switches, 2-1
- Enable switch, 2-2
- Enable switch (foot), 2-3
- Flashing light, 2-3
- Gravity gate, 2-2
- Guardrails, 2-2
- Lanyard anchor points, 2-1
- RCD/ELCB AC outlet, 2-3
- Safety Device Information, 2-1
Safety precautions2 topics
- Fuel Handling Precautions, 1-4
- Hydraulic Systems, 1-4
Securing for Day, 8-6
Stabiliser Controls, 6-52 topics
- Automatic Operation, 6-6
- Manual Operation, 6-5
Stabilisers, 5-1
Stowing2 topics
- Correct Stowed Position, 10-1
- Locking the Booms, 10-1
Stowing the MHP14AT, 10-12 topics
- Boom lock pin, 10-1
- Boom Restraint and Keeper, 10-1
Structural damage and welds, 7-51 topic
- Boom welds, 7-5
Tipover hazard, 1-34 topics
- Bolt, D-Clamp or attaching device, 10-2
- Jockey wheel, 10-2
- Latching mechanism, 10-2
- Road lights, 10-2
Trailer tongue weight, 3-1, 3-2
Transporting the MHP14AT, 10-12 topics
- Securing to a Transport Vehicle, 10-1
- Trailering, 10-1
Travelling height, 3-1, 3-2
Troubleshooting, 13-11 topic
- Operator Troubleshooting Chart, 13-1
Turntable rotation, 3-1, 3-2
Tyre Pressure, 7-4
Unlocking the Booms, 8-3
Warranty - Limited1 topic
- see inside front cover
Wheels and tyres, 7-4
Wiring harnesses, 7-21 topic
- Loose connections, 7-2
Work Place Inspection and Practices, 1-2
Working Envelope MHP14AT, 3-4
Inside this manual
Real pages from this operator's manual (78 pages). Open the sample pages (PDF, 846 KB)
- Specifications, page 25: K Recommended Hydraulic Oil
- Maintenance, page 40: 7. Pre-operational Inspection
- Controls and operation, page 57: Figure 9.5 - Platform Control Box
- Color page, page 19: MHP14AT & MHP13AT – 13225A
- Color page, page 34: 6. Controls
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the MHP14AT, MHP13AT are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
This manual: Operator's Manual 13225A$69.93
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
This manual
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 78 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).