Snorkel SR626 - Yanmar Stage 5 Telehandler Operator's and Maintenance Manual
173 pages · Publication 159-0003-001
Added to your cart. View cart
- Models
- SR626 - Yanmar Stage 5
- Manual type
- Operator's and Maintenance Manual
- Pages
- 173
- Publication
- 159-0003-001
- Condition
- Brand new
What's inside
From the manual's own table of contents: 90 topics. See sample pages (PDF, 531 KB)
- GENERAL INFORMATION
- PRELIMINARY INFORMATION
- THE MANUFACTURER
- THE DEALER
- CE CERTIFICATION
- OPERATOR TRAINING
- MACHINE IDENTIFICATION
- NOISE
- VIBRATION
- TECHNICAL SPECIFICATIONS
- REGULATORY REFERENCES
- SAFETY
- INTENDED USE OF THE MACHINE
- UNINTENDED USE
- LIMITS OF USE
- GENERAL REGULATIONS FOR USE
- WORKING ON SITE
- MANEUVERING ON UNEVEN GROUND
- MANEUVERING ON A TRANSVERSAL SLOPE
- MANEUVERING ON A LONGITUDINAL SLOPE
- IN CASE OF TIPPING OVER
- PREPARING TO DRIVE
- OPENING THE BACK WINDOW
- HEATING AND AIR CONDITIONING
Show all 90 topics
- SAFETY DECALS
- LOAD CHART
- SYSTEM
- TRANSPORTING THE MACHINE
- GENERAL SAFETY WARNINGS
- CHECKING ENGINE START UP
- MOVEMENT IN REVERSE DRIVE
- REFUELLING THE MACHINE
- STORING THE MACHINE
- MACHINE DEMOLITION
- USING THE MACHINE
- ROAD CIRCULATION
- CONTROLS AND GENERAL REGULATIONS
- DESCRIPTION OF THE CONTROLS
- DESCRIPTION OF THE RIGHT FRONT DASHBOARD
- OPERATING WITH MACHINE
- START UP
- FORWARD DRIVE OR REVERSE DRIVE
- STEERING
- SELECTING THE DRIVING MODE
- ACCESSORY COUPLING AND RELEASE
- STACKING
- LIMITS OF MACHINE USE
- WHAT TO DO AND NOT DO
- HOW TO VERIFY THAT THE ANTI-TIP DEVICE WORKS CORRECTLY
- TOWING THE MACHINE
- STAGE V MAINTENANCE
- GENERAL INFORMATION
- THERMAL RISK
- PRESSURISED LIQUIDS
- EXHAUST GAS
- HANDLE THE BATTERY WITH CARE
- START-UP USING AN EXTERNAL BATTERY
- IN CASE OF FIRE
- MAINTENANCE WITH THE ENGINE OFF
- MAINTENANCE WITH THE ENGINE ON
- RESPECT THE ENVIRONMENT
- MAINTENANCE SCHEDULE
- ENGINE
- HEAT EXCHANGER
- CHECKING THE HYDRAULIC OIL LEVEL
- CHANGING THE HYDRAULIC OIL
- VISUAL INSPECTION FOR OIL LEAKS IN THE HYDRAULIC SYSTEM
- CLEANING OR REPLACING THE OIL TANK VENT CARTRIDGE (UNTIL SEPTEMBER 2021)
- REPLACING THE OIL TANK VENT CARTRIDGE (VALIDITY FROM SEPTEMBER 2021)
- REPLACING THE OIL TANK VENT CARTRIDGE (FROM SEPTEMBER 2021)
- REPLACING THE HYDROSTATIC PUMP OIL CARTRIDGE/FILTER
- CLEANING AND REPLACING THE ENGINE AIR FILTER CARTRIDGE
- REPLACING THE CABIN AIR FILTER
- GREASING – LUBRICATION
- LUBRICANT/LIQUID CHARACTERISTICS
- AXLES
- TORQUE OF THE SCREWS AND GREASING THE CARDAN SHAFT CROSS
- RECHARGING THE AIR CONDITIONING
- CHECKING THE TIRE PRESSURE AND TORQUE OF THE NUTS
- INSPECTING, CHARGING AND REPLACING THE BATTERY
- FUSE HOLDER CARD
- TRANSMISSION ERRORS LIST
- ENGINE ERRORS
- ELECTRICAL SYSTEM DIAGRAM
- REQUEST FOR THE ELECTRICAL WIRING DIAGRAM
- HYDRAULIC SYSTEM DIAGRAM
- REQUEST FOR HYDRAULIC SYSTEM DIAGRAM
- SCHEDULED MAINTENANCE COUPONS
- IMPLEMENTED SCHEDULED MAINTENANCE COUPONS
- MACHINE RECEIPT CARD
Inside this manual
Real pages from this operator's and maintenance manual (173 pages). Open the sample pages (PDF, 530 KB)
- Specifications, page 27: GENERAL REGULATIONS FOR USE
- Controls and operation, page 51: DESCRIPTION OF THE CONTROLS
- Maintenance, page 107: MAINTENANCE SCHEDULE
- Color page, page 120: Model: Snorkel SR626
- Color page, page 138: Model: Snorkel SR626
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 173 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).