MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Terex Genie Superlift Advantage Material Lift Service Manual

78 pages · Publication 32283

$69.61
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
Genie Superlift Advantage
Serial coverage
from SN 9594-101 to 5501-15094, from SLA02-15095 to SLA04-25258
Manual type
Service Manual
Pages
78
Publication
32283
Condition
Brand new
Terex Genie Superlift Advantage Material Lift Service Manual, publication 32283

What's inside

From the manual's own table of contents: 35 sections, 51 entries. See sample pages (PDF, 443 KB)

Important Information
General Safety Rules
Load Handling Attachments
Bolt Torque Specification
Introduction3 topics
  • Table A
  • Table B
  • Table C
Maintenance Inspection Report
Inspect the Operator's Manual
Inspect the Decals and Placards
Inspect for Damage, Loose or Missing Parts
Check the Winch Operation
Inspect the Columns for Damage
Inspect the Cable and Cable Pulleys
Check the Mast for Proper Sequencing
Inspect the Casters and Wheels
Inspect the Column Hold Down System
Inspect All Welds
Clean the Columns
Inspect and Lubricate the Winch
Inspect and Lubricate the Rotating Barrel Handler
Lubricate the Casters and Wheels
Inspect the Mast Assembly for Wear
Replace the Winch Friction Disks
Inspect the Safety Brake System
Inspect the Painted Surfaces
Show all 35 sections
Mast Will Not Sequence Properly
Carriage Will Not Raise, But Winch Will Operate
Winch Will Not Operate
How To Remove the Base - Standard Base
How To Remove the Base - Straddle Base
How to Disassemble the Mast Assembly
How to Replace the Lifting Cable
How to Replace a Lifting Pulley - Mast Installed
How To Disassemble the Winch - Single Speed
How To Disassemble the Winch - Two Speed
How To Order Parts13 topics
  • Figure 7-A Decals and Paint (Rev A; August 2007)
  • Figure 7-B Number 1 Mast Attached Parts (Rev A; August 2007)
  • Figure 7-C Standard Base Components (Rev A; August 2007)
  • Figure 7-D Straddle Base Components (Rev A; August 2007)
  • Figure 7-E Mast Components - View 1 (Rev C; October 2006)
  • Figure 7-F Mast Components - View 2 (Rev B; August 2007)
  • Figure 7-G Mast Components - Pulleys and Cable (Rev C; August 2007)
  • Figure 7-H Load Handling Attachments - Forks
  • Figure 7-I Load Handling Attachments - Boom, Pipe Cradle and Load Platform
  • Figure 7-J Load Handling Attachments - Vertical Barrel Stacker
  • Figure 7-K Load Handling Attachments - Rotating Barrel Handler
  • Figure 7-L Single Speed Winch (Rev B; July 2007)
  • Figure 7-M Two Speed Winch (Rev B; July 2007)

Inside this manual

Real pages from this service manual (78 pages). Open the sample pages (PDF, 443 KB)

Sample pages from the Terex Genie Superlift Advantage Material Lift Service Manual: Specifications, Troubleshooting
  • Specifications, page 7: Section 2 - Specifications
  • Troubleshooting, page 24: Section 5 - Troubleshooting Flow Charts

This is a service manual

Here's how it compares to the other manual types.

This manual

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

Engine service manuals are sometimes sold separately, since certain machine models were offered with more than one engine option.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 78 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).