Wacker Neuson 1403, 1503, 1903, 2203 Compact Excavator Operator's Manual
110 pages · Publication 1000147740
Added to your cart. View cart
What's inside
From the manual's own table of contents: 21 sections, 193 entries. See sample pages (PDF, 595 KB)
General2 topics
- Introduction
- Instructions for ordering spare parts
Guarantee and warranty1 topic
- Identification Plate
Safety2 topics
- Safety rules
- EC - Declaration of Conformity
Specifications60 topics
- Technical Data Compact Excavator 1403
- Principal Data 1403
- Driving and swiveling specifications 1403
- Hydraulic system 1403
- Dozer blade 1403
- Bucket (Standard) 1403
- Technical Data Compact Excavator 1503
- Principal Data 1503
- Driving and swiveling specifications 1503
- Hydraulic system 1503
- Dozer blade 1503
- Bucket (Standard) 1503
- Technical Data Compact Excavator 1903
- Principal Data 1903
- Driving and swiveling specifications 1903
- Hydraulic system 1903
- Dozer blade 1903
- Bucket (Standard) 1903
- Technical Data Compact Excavator 2203
- Principal Data 2203
- Driving and swiveling specifications 2203
- Hydraulic system 2203
- Dozer blade 2203
- Bucket (Standard) 2203
- Noise emissions
- Vibration levels
- Fire extinguisher
- Stickers
- Primary Dimensions
- Primary Dimensions 1403
- Primary Dimensions 1503
- Primary Dimensions 1903
- Primary Dimensions 2203
- Component designations
- Cab equipment and controls
- Functions at the instrument panel
- Work light
- Accelerator
- Driver's Seat
- Heater, Heating and Air Vents
- Windshield Wipers
- Hydraulic System
- Release of residual pressure
- Emergency Control for Working Equipment (1503-2203)
- Hydraulic oil level
- Hydraulic connections for additional attachments
- Safety Equipment
- Seat
- Lifting the Seat Bracket (Frame)
- Fuse box
- Order of fuses
- Swinging and swiveling the excavator equipment
- Left control lever
- Right control lever
- Excavator arm movements
- Dozer Blade
- Tilting the superstructure (only 2203)
- Widening and narrowing the track base
- Working with the telescopic traversing gear
- Changing attachments
Excavating options6 topics
- Digging
- Excavator arm swing angle
- Bulldozing
- Lifting
- Cab protection
- Stability
Transport instructions1 topic
- After loading
Things to check before starting the excavator6 topics
- Visual inspection
- Check motor oil
- Check hydraulic oil level
- Check coolant level
- Refuelling
- Check safety equipment
Starting the excavator2 topics
- Starting procedure
- Jump starts (with jumper cables)
Driving the Crawler Excavator37 topics
- Driving
- Travel on dangerous ground and on slopes
- Turning
- Traveling speeds
- Shutting down
- Care and Maintenance
- General
- Maintenance schedule
- Daily maintenance
- General visual inspection and leak check
- Engine
- Check motor oil
- Check coolant level
- Check fuel filter with water separator
- Clean air filter
- Refuelling
- Hydraulics
- Check hydraulic oil level
- Undercarriage and attachments
- Tracks
- Check attachments (bucket, grab, etc.)
- Lubrication points
- Weekly maintenance
- Check engine mounting
- Check fan belt tension
- Check fuel filter with water separator
- Clean radiator
- Hydraulic pump
- Clean hydraulic cooler (1402 RD Optional)
- Traversing Gear
- Check Crawler Tenison
- Traveling and swiveling drives
- Turntable
- Bearing system
- Cab heating
- Attachments
- Check windshield washer system
Maintenance every 50 operating hours6 topics
- Change oil
- Change oil filter
- Battery
- Check tappet clearance
- Change hydraulic oil filter
- Check the track rollers and wheels for play, also check track tension!
Maintenance every 250 operating hours4 topics
- Change oil and oil filter
- Replace fuel filter
- Check hydraulic oil and filter
- Electrical components
Maintenance every 500 operating hours10 topics
- Change air filter
- Check valves
- Check coolant system and hoses
- Check electrical connections
- Check glow plug
- Check thermostat
- Check primary valves
- Change hydraulic oil and filter (return filter)
- Traveling drive
- Change drive oil
Maintenance every 1,000 operating hours31 topics
- Check alternator and starter
- Clean fuel tank
- Check water pump
- Check tappet clearance
- Change hydraulic oil
- Check ventilation filter and sieve
- Traveling and slewing drives
- Check oil (Traveling drive)
- Change oil (Slewing drive)
- Annual Maintenance
- Change air filter
- Change oil and filter
- Change fuel filter
- Change hydraulic oil and hydraulic oil filter
- Gears
- Change gear oil
- Gear rim
- Maintenance during longer periods of inactivity
- Preparation for longer periods of inactivity
- Starting the excavator after periods of inactivity
- Maintenance of Yanmar Engine
- Engine lubrication system
- Check of oil level
- Refilling of motor oil
- Special safety instructions
- Engine and hydraulic cooling system
- V-belt
- Check of V-belt tension
- Retightening of V-belt
- Fuel system
- Preliminary fuel filter
Lift Capacity1 topic
- Lift capacity chart
Options1 topic
- Additional hydraulics actuated electrically
Option Theft Protection1 topic
- Hoisting Operation
A Safety instructions for the operation of earth-moving machinery1 topic
- dump trucks
Inside this manual
Real pages from this operator's manual (110 pages). Open the sample pages (PDF, 594 KB)
- Specifications, page 20: Specifications
- Controls and operation, page 44: Right control lever
- Maintenance, page 72: Maintenance every 250 operating hours
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 110 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).