Wacker Neuson 501s, 701s, 701sp Compact Loader Operator's Manual
156 pages · Publication 1000151639
Added to your cart. View cart
What's inside
From the manual's own table of contents: 44 sections, 260 entries. See sample pages (PDF, 622 KB)
General216 topics
- Important information on this Operator's Manual
- Machine overview
- Brief description
- Travelling drive
- Work hydraulics
- Cooling system
- Cab (ROPS and FOPS)
- Fields of application, attachments
- Use: attachment
- Regulations
- EC Declaration of Conformity version 501s
- EC Declaration of Conformity version 701s
- EC Declaration of Conformity version 701sp (option)
- Type labels and component numbers
- Other signs and symbols
- on the outside of the machine
- inside the cab
- Fire extinguisher
- Duty to wear ear protectors
- Identification of warnings and dangers
- Warranty
- Designated use and exemption from liability
- General conduct and safety instructions
- Organisational measures
- Selection and qualification of staff, basic responsibilities
- Safety instructions regarding operation
- Normal operation
- Applications with lifting gear
- Trailers and attachments
- Transport
- Safety instructions for maintenance
- Warning of special hazards
- Electrical energy
- Gas, dust, steam, smoke
- Hydraulics
- Noise
- Oil, grease and other chemical substances
- Battery
- Tyres
- Cab, model 501s with mechanical pilot control: overview
- Cab, model 501s with mechanical pilot control (legend)
- Cab, model 501s with hydraulic pilot control: overview
- Cab, model 501s with hydraulic pilot control (legend)
- Cab, model 701s: overview
- Cab, model 701s (legend)
- Instrument panel overview
- Instrument panel legend
- Putting into operation
- Safety instructions
- Putting the machine into operation for the first time
- Running-in period
- Check lists
- Start-up checklist
- Operation checklist
- Parking checklist
- Driving the loader
- Preheating start switch: overview
- Throttle lever: overview
- Parking brake
- Parking brake (option 501 with hydraulic pilot control)
- Telltales and warning lights: overview
- Before starting the engine
- Starting the engine: general
- Procedure
- Starting with the drive interlock (option)
- Starting at low temperatures
- Jump-starting the engine (supply battery)
- When the engine has started
- Engine warm-up
- Special instructions for driving on public roads
- Preparing the machine for driving on public roads
- Moving off
- Control lever
- Drive lever (model 501)
- Left-hand side drive lever, model 501 with hydraulic pilot control/701
- Hydrostatic service brake
- Hydrostatic parking brake
- Driving on slopes
- Specific safety instructions
- Driving on rough terrain
- Parking the machine
- Parking the machine on slopes
- Light system
- Lights (road travel option)
- Turn indicators (road travel option)
- Hazard warning system (road travel option)
- Rear working light (option)
- Interior light
- Rotating beacon (option)
- Ventilation (fully-glazed cab option)
- Cab heating and ventilation
- Summer/winter operation
- Seat adjustment, safety bar and seat belt
- Seat adjustment
- Comfort seat weight adjustment
- Horizontal adjustment
- Safety bar
- Seat belt
- Cab and engine cover
- Emergency exit
- Engine cover
- Tilting the cab
- Cab entry and exit
- Cab access and exit (fully-glazed cab option)
- Washer system
- Tank for washer system
- Towing and transporting the machine
- Towing the loader
- Towing
- Crane handling the machine
- Crane-handling bracket (option)
- Loading and transporting the machine
- Tying down the machine
- Working with the machine
- General safety instructions
- Control levers: overview
- Locking the work hydraulics (option 501 with hydraulic pilot control)
- Right-hand side control lever, model 501 with hydraulic pilot control/701
- Control levers (model 501)
- control/701
- Lowering the loader unit with the engine switched off (model 501)
- Releasing the pressure on the quick couplers on the loader unit
- Re-equipping the loader unit
- Fitting attachments onto the quickhitch
- Connections for auxiliary hydraulics
- 3rd control circuit (option for model 701sp)
- Couplings
- Auxiliary hydraulics pedal
- Locking the auxiliary hydraulics pedal
- Transporting with a full bucket
- Parallel bucket lift (option for model 501)
- Attachments
- Standard Bucket
- Excavation bucket
- Multipurpose Bucket
- Lightweight Material Bucket
- 4-in-1” Bucket
- 4-in-1” Bucket with Teeth
- Rotary Broom
- Multipurpose Bucket
- Agricultural grab
- Pallet Forks
- Engine trouble
- Introduction
- Fuel system
- Specific safety instructions
- Refuelling
- Stationary fuel pumps
- Diesel fuel specification
- Bleeding the fuel system
- Fuel prefilter with water separator
- Engine lubrication system
- Checking the oil level
- Filling up engine oil
- Engine and hydraulics cooling system
- Specific safety instructions
- Checking/filling up coolant
- Air filter
- Replacing the filter
- V-belt
- Checking V-belt tension
- Retightening the V-belt
- Hydraulic system
- Checking the hydraulic oil level
- Filling up hydraulic oil
- After changing the hydraulic oil
- Important information for the use of biodegradable oil
- Checking hydraulic pressure lines
- Stabilisers (option for model 701)
- Extending the stabilisers
- Retracting the stabilisers
- Tyre maintenance
- Tyre check
- Wheel change
- Raising and jacking up the machine
- Removing the wheels
- Mounting the wheels
- Airboss tyres
- Travelling drive
- Checking the oil level and filling up oil
- Draining oil
- Maintenance of attachments
- Electrical system
- Service and maintenance work at regular intervals
- Instructions concerning specific components
- Alternator
- Battery
- General maintenance work
- Cleaning
- General instructions for all areas of the machine
- Inside the cab
- Under the cab
- Exterior of the machine
- Engine compartment
- Rear window
- Screw connections and attachments
- Pivots and hinges
- Maintenance strut of loader unit
- Fluids and lubricants
- Maintenance plan (overview)
- Maintenance label
- Explanation of symbols on the maintenance label
- Chassis
- Engine
- Brakes
- Work hydraulics
- Pilot control
- Additional control circuit + 3rd control circuit
- Fuse box in instrument panel
- Main fuse box with relays
- Relays
- Tyres
- Noise levels
- Vibration
- Coolant compound table
- Dimensions
Show all 45 sections
Inside this manual
Real pages from this operator's manual (156 pages). Open the sample pages (PDF, 621 KB)
- Controls and operation, page 97: BA 5701 En – Edition 2.2 *5701b340.fm
- Maintenance, page 139: BA 5701 En – Edition 2.2 *5701b530.fm
- Specifications, page 147: BA 5701 En – Edition 2.2 *5701b610.fm
- Color page, page 47: BA 5701 En – Edition 2.2 *5701b320.fm
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 156 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).