Wacker Neuson 50z3, 6003 Track Excavator Operator's Manual
198 pages · Publication 1000127717
Added to your cart. View cart
What's inside
From the manual's own table of contents: 33 sections, 208 entries. See sample pages (PDF, 583 KB)
General174 topics
- Important information on this Operator's Manual
- Machine overview
- Brief description
- Fields of application, attachments
- Regulations
- EC declaration of conformity version 50Z ³ up to serial number AH00578
- EC declaration of conformity version 50Z ³ from serial number AH00579
- EC declaration of conformity version 6003 up to serial number AH00578
- EC declaration of conformity version 6003 from serial number AH00579
- Type labels and component numbers
- Other signs and symbols
- Fire extinguisher
- Identification of warnings and dangers
- Warranty
- Designated use and exemption from liability
- General conduct and safety instructions
- Safety instructions regarding operation
- Safety instructions for maintenance
- Warning of special hazards
- 50Z3 controls
- controls
- Putting into operation
- Check lists
- Start-up checklist
- Operation checklist
- Parking checklist
- Driving the excavator
- Preheating start switch
- Throttle
- Automatic revs setting (option)
- Telltales and warning lights: overview
- Before starting the engine
- Starting the engine: general
- Procedure
- Jump-starting the engine (supply battery)
- Special instructions for driving on public roads
- Starting at low temperatures
- When the engine has started
- Engine warm-up
- Moving off
- Drive levers
- High speed
- Hydraulic brake
- Mechanical brake
- Driving on slopes
- Stabiliser blade operation
- Parking the machine
- Parking the machine on slopes
- Light system
- Working light
- Roof lights (option)
- Interior light
- Rotating beacon (option)
- Cab heating and ventilation
- Summer/winter operation (up to serial number AD04650)
- Heating controls (from serial number AD04651)
- Washer system
- Tank for washer system
- Air conditioning (option)
- Recirculated air mode
- Seat adjustment
- Weight adjustment
- Height adjustment
- Horizontal adjustment
- Backrest adjustment
- Seat belt
- Emergency exit
- Front window
- Door
- Engine cover
- Battery master switch
- Tilting the cab
- Exit through the door
- Adjusting the left-hand side armrest
- Towing the track excavator
- Towing
- Crane handling the machine
- Loading and transporting the machine
- Tying down the machine
- Working with the machine
- Control levers/ISO controls: overview
- Changeover valve for SAE/ISO controls (option)
- Control lever with proportional controls (option): overview
- Control lever if equipped with 3rd control circuit (option): overview
- Vario (option)
- Releasing the pressure on the work hydraulics
- Re-equipping attachments
- Powertilt (option)
- Re-equipping
- Mounting the Powertilt unit
- Removing the Powertilt unit
- Port
- Operation
- Right-hand side control lever (Powertilt)
- Enabling the 3rd control circuit
- Connections for auxiliary hydraulics
- Grab couplings
- Attachments
- Hose burst valve” safety feature (option)
- Working with the standard bucket
- Inadmissible work
- Excavator work position
- Bucket position when digging
- Excavating trenches
- Loading
- Grading
- Excavating trenches sideways
- Grading
- Working alongside trenches
- Stabiliser blade at rear
- Safe load indicator (option)
- Engine trouble
- Engine error codes
- Malfunctions of the Powertilt unit
- Introduction
- Fuel system
- Specific safety instructions
- Refuelling
- Fuel-filling pump (option)
- Stationary fuel pumps
- Diesel fuel specification
- Bleeding the fuel system
- Fuel prefilter with water separator
- Engine lubrication system
- Checking the oil level
- Filling up engine oil
- Engine and hydraulics cooling system
- Specific safety instructions
- Checking/filling up coolant
- Air filter
- Replacing the filter
- V-belt
- Checking V-belt tension
- Retightening the V-belt
- Checking the V-belt of the air conditioning system
- Tightening the V-belt of the air conditioning system
- Hydraulic system
- Specific safety instructions
- Checking the hydraulic oil level
- Filling up hydraulic oil
- Pilot valve
- Tracks
- Travelling drive
- Electrical system
- General maintenance work
- Maintenance if the machine is out of service for a longer period of time
- Fluids and lubricants
- Maintenance plan (overview)
- Maintenance label
- Chassis
- Engine
- Hydraulic system
- Undercarriage and swivel unit
- Stabiliser blade
- Work hydraulics
- Electrical system
- Noise levels
- Vibration
- Coolant compound table
- Powertilt
- Dimensions model 50Z ³
- Dimensions model 6003
- Lift capacity table 50Z ³
- Lift capacity table 50Z ³ counterweight (option)
- Lift capacity table 50Z ³ long stick (option)
- Lift capacity table 50Z ³ long stick, counterweight (option)
- Lift capacity table 6003
- Lift capacity table 6003 counterweight (option)
- Lift capacity table 6003 long stick (option)
- Lift capacity table 6003 long stick, counterweight (option)
- Lift capacity table 6003 long stick, triple articulation boom (option)
- Lift capacity table 6003 triple articulation boom (option)
- Lift capacity table 6003 triple articulation boom, counterweight (option)
- Lift capacity table 6003 Vario (option)
Important information Instructions concerning specific components1 topic
- On this Operator's Manual
Show all 34 sections
Inside this manual
Real pages from this operator's manual (198 pages). Open the sample pages (PDF, 582 KB)
- Controls and operation, page 118: BA 5003/6003 En – Edition 3.1 * *5003b340.fm
- Maintenance, page 169: BA 5003/6003 En – Edition 3.1 *5003b530.fm
- Specifications, page 187: BA 5003/6003 En – Edition 3.1 *5003b610.fm
- Color page, page 44: BA 5003/6003 En – Edition 3.1 * *5003b320.fm
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 198 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).