Wacker Neuson 6503WD Mobile Excavator Operator's Manual
192 pages · Publication 1000158219
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Added to your cart. View cart
- Models
- 6503WD
- Manual type
- Operator's Manual
- Pages
- 192
- Publication
- 1000158219
- Condition
- Brand new
What's inside
From the manual's own table of contents: 31 sections, 288 entries. See sample pages (PDF, 624 KB)
General257 topics
- Important information on this Operator's Manual
- Machine overview
- Brief description
- Travelling drive
- Work hydraulics
- Cooling system
- Cab (TOPS and FOPS)
- Fields of application, attachments
- Use: attachment
- Regulations
- EC declaration of conformity version 6503 WD up to serial number AH00707
- EC declaration of conformity 6503 WD from serial number AH00708
- Type labels and component numbers
- Other signs and symbols
- on the outside of the machine
- alignment marks
- inside the cab
- Fire extinguisher
- Identification of warnings and dangers
- Warranty
- Designated use and exemption from liability
- General conduct and safety instructions
- Organisational measures
- Selection and qualification of staff, basic responsibilities
- Safety instructions regarding operation
- Normal operation
- Travelling on public roads
- Applications with lifting gear
- Trailers and attachments
- Transport
- Safety instructions for maintenance
- Warning of special hazards
- Electric energy
- Gas, dust, steam, smoke
- Hydraulics
- Noise
- Oil, grease and other chemical substances
- Battery
- Tyres
- Cab overview up to serial number AH00707
- Instrument panel overview
- Cab overview from serial number AH00708
- Instrument panel overview
- Putting into operation
- Safety instructions
- Putting the machine into operation for the first time
- Running-in period
- Check lists
- Start-up checklist
- Operation checklist
- Parking checklist
- Driving the excavator
- Preheating start switch: overview
- Throttle lever: overview
- Steering system
- Telltales and warning lights: overview
- Before starting the engine
- Starting the engine: general
- Procedure
- Starting with the drive interlock (option)
- Starting at low temperatures
- When the engine has started
- Engine warm-up
- Jump-starting the engine (supply battery)
- Special instructions for driving on public roads
- Moving off
- Drive pedal
- High speed
- Hydraulic brake
- Service brake
- Parking brake
- Locking the oscillating axle
- Driving on slopes
- Specific safety instructions
- Stabiliser blade operation
- Parking the machine
- Parking the machine on slopes
- Locking the hydraulic system
- Steering wheel lever
- Adjusting the steering column
- Hazard warning system
- Light system
- Working lights
- Roof lights (option)
- Interior light
- Rotating beacon (option)
- Cab heating and ventilation
- Heating adjustment
- Washer system
- Tank for washer system
- Air conditioning (option)
- Recirculated air mode
- Seat adjustment
- Weight adjustment
- Height adjustment
- Horizontal adjustment
- Backrest adjustment
- Seat belt
- Emergency exit
- Front window
- Side window
- Engine cover
- Battery master switch (model 6503 WD)
- Tilting the cab
- Door
- Exit through the door
- Adjusting the left-hand side armrest
- Interlocks
- Interlock for boom and attachment
- Interlock for boom and upper carriage
- Stabiliser blade interlock
- Towing the mobile excavator
- Towing
- Loading the machine
- Crane handling the machine
- Loading and transporting the machine
- Tying down the machine
- Working with the machine
- General safety instructions
- Control levers/ISO controls: overview
- Left-hand side control lever
- Boom swivel controls/triple articulation boom (option)
- Lowering the boom with the engine stopped
- Rotating the upper carriage
- Swivel unit brake
- Changeover valve for SAE/ISO controls (option)
- Left-hand side control lever
- Right-hand side control lever
- Directional valve position
- Directional valve
- Control lever with proportional controls (option): overview
- Function
- Operating the boom/auxiliary hydraulics
- Hammer operation
- Adjusting control response
- Characteristic curves – status display
- Measures to be taken in case of malfunctions
- Control lever if equipped with 3rd control circuit (option): overview
- Right-hand side control lever
- Releasing the pressure on the work hydraulics
- Re-equipping attachments
- Specific safety instructions
- Removing a bucket
- Mounting a bucket
- Quickhitch (option)
- Hydraulic quickhitch (option)
- Maintenance
- Operation
- Powertilt (option)
- Re-equipping
- Mounting the Powertilt unit
- Removing the Powertilt unit
- Port
- Operation
- Right-hand side control lever (Powertilt)
- Enabling the 3rd control circuit
- Auxiliary hydraulics connections
- Quick-connect couplings
- Attachments
- Hose burst valve” safety feature (option)
- Before starting work
- Examining the site
- Preparing the ground
- Working with the excavator
- Preparing the excavator
- Working with the standard bucket
- Inadmissible work procedures
- Excavator work position
- Bucket position when digging
- Excavating trenches
- Loading
- Grading
- Excavating trenches sideways
- Working alongside trenches
- Stabiliser blade at rear
- Safe load indicator (option)
- Troubleshooting
- Engine error codes
- Malfunctions of the Powertilt unit
- Introduction
- Maintenance of attachments
- Fuel system
- Refuelling
- Stationary fuel pumps
- Diesel fuel specification
- Bleeding the fuel system
- Fuel prefilter with water separator
- Engine lubrication system
- Checking the oil level
- Filling up engine oil
- Engine and hydraulics cooling system
- Checking/filling up coolant
- Filling up coolant in the air conditioning system (option)
- Checking the oil level in the compressor
- Air filter
- Replacing the filter
- V-belt
- Checking V-belt tension
- Retightening the V-belt
- Checking the V-belt of the air conditioning system (option)
- Tightening the V-belt of the air conditioning system (option)
- Hydraulic system
- Checking the hydraulic oil level
- Filling up hydraulic oil
- Important information for the use of biodegradable oil
- Pilot control filter
- Checking hydraulic pressure lines
- Tyres
- Inspection work
- Wheel change
- Travelling drive
- Checking the oil level and filling up oil
- Draining oil
- Electrical system
- Specific safety instructions
- Service and maintenance work at regular intervals
- Instructions concerning specific components
- Alternator
- Powertilt (option)
- Battery
- General maintenance work
- Cleaning
- General instructions for all areas of the machine
- Inside the cab
- Exterior of the machine
- Engine compartment
- Screw connections and attachments
- Pivots and hinges
- Maintenance if the machine is out of service for a longer period of time
- Preparatory work before taking the machine out of service
- Putting the machine into operation again
- Fluids and lubricants
- Additional oil change and filter replacement (hydraulics)
- Maintenance plan (overview)
- Maintenance label
- Explanation of symbols on the maintenance label
- Chassis
- Engine
- Undercarriage and swivel unit
- Stabiliser blade
- Work hydraulics
- Fuse box under the seat on the left
- Main fuse box with relays underneath the cab
- Relays
- Noise levels
- Vibration
- Coolant compound table
- Powertilt
- Dimensions model 6503 WD
- Dimensions model 6503 WD with triple articulation boom (option)
- Lift capacity table 6503 WD
- Lift capacity table 6503 WD with twin tyres
- Lift capacity table 6503 WD with triple articulation boom (option)
- Lift capacity table 6503 WD with twin tyres and triple articulation boom (option)
- Lift capacity table 6503 WD with long stick (option)
- Lift capacity table 6503 WD with twin tyres and long stick (option)
- boom (option)
Abbreviations
Air filter
Component numbers
Documents
Drive interlock (option)
Driving licence
Equipment
F Rotating beacon
G Safety instructions regarding operation
General conduct
Heating
Instrument panel overview
L Engine
Labels
Legal regulations
Light system
Loading the machine
Lowering the boom with the engine stopped
Fields of application
Machine inspections
Maintenance Towing
Biodegradable oil
Bleeding the fuel system
Show all 32 sections
Checking the coolant level
Checking the engine oil level
Checking the hydraulic oil level
Filling in engine oil
Filling up coolant
Tyres
Maintenance plan
Noise levels
Inside this manual
Real pages from this operator's manual (192 pages). Open the sample pages (PDF, 623 KB)
- Controls and operation, page 114: BA 6503 En – Edition 3.0 * *6503b340.fm
- Maintenance, page 168: BA 6503 En – Edition 3.0 * *6503b540.fm
- Specifications, page 180: BA 6503 En – Edition 3.0 * *6503b610.fm
- Color page, page 45: BA 6503 En – Edition 3.0 *6503b320.fm
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
This manual
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 192 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).