MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Case Magnum 250, 280, 310, 340, 380 Tractor Operator's Manual

634 pages · Publication 47585531

$69.89
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
Magnum 250, 280, 310, 340, 380
Serial coverage
PIN ZERF04500 and above
Manual type
Operator's Manual
Pages
634
Publication
47585531
Condition
Brand new
Case Magnum 250, 280, 310, 340, 380 Tractor Operator's Manual, publication 47585531

What's inside

From the manual's own table of contents: 50 sections, 284 entries. See sample pages (PDF, 556 KB)

Note to the owner
Engine tampering
Tractor intended use
Electro-magnetic compatibility (EMC)
Product identification
Manual storage
Machine orientation
Component Identification
Selective Catalytic Reduction (SCR) system
Safety rules and signal word definitions
Safety rules - General
Safety rules - General maintenance safety
Safety rules - Wheels and tires
Safety rules - Driving on public roads and general transportation safety
Safety rules - Fire and explosion prevention
Safety rules - General battery safety
Safety rules - Instructional seat safety
Safety rules - Operator presence system
Safety rules - Power Take-Off (PTO)
Safety rules - Reflectors and warning lights
Safety rules - Seat belts
Safety rules - Roll Over Protective Structure (ROPS)
Safety rules - Cab protection
Safety rules - Air conditioning system
Show all 50 sections
Safety rules - Personal Protective Equipment (PPE)
Safety rules - Do Not Operate tag
Safety rules - Hazardous chemicals
Safety rules - Utility safety
Safety rules - Electrical storm safety
Safety rules - Mounting and dismounting
Safety rules - Working at heights
Safety rules - Lifting and overhead loads
Safety rules - Implements, tools and trailers
Safety rules - Roll over and tip over
Proposition 65
Ecology and the environment
Safety signs38 topics
  • Tractor access
    • Lower step
    • Control identification
    • Overview
    • Steering column
    • Front console
    • Pedal controls
    • Pneumatic trailer brake
    • Armrest console
    • Multi function handle
    • Minimum/maximum RPM throttles
    • Control panel
    • Remote valve controls
    • Joystick
    • Armrest compartment
    • Adjusting the armrest console
    • Fender console
    • Automatic temperature controls
    • Automatic temperature control system
    • Ventilation
    • Interior lamps
    • Rear fender
    • Front hitch
    • Overview
    • Gauges
    • Status and warning icons
    • Upper display
    • Lower display
    • Keypad
    • Setup menu
    • Rear tire radius chart
  • Adjust menu
  • Performance features
  • Engine - Safety rules
  • Normal engine starting
  • Cold starting aids
  • Cold temperature operation
  • Stopping the engine
FULL POWERSHIFT TRANSMISSION8 topics
  • Powershift transmission
  • Best practices for prolonged transmission life
  • Inching pedal and throttle
  • Powershift transmission controls
  • Upper display - Powershift transmission
  • Driving the Powershift vehicle
  • Setting default gears
  • Automatic Productivity Management (APM)
CONTINUOUSLY VARIABLE TRANSMISSION (CVT)6 topics
  • Continuously Variable Transmission (CVT) brake, pedal and throttle operation
  • Continuously Variable Transmission (CVT) controls
  • Upper display
  • Continuously Variable Transmission (CVT) operation
  • Driving the Continuously Variable Transmission (CVT)
  • Transmission messages
POWERSHIFT AND CVT TRANSMISSIONS182 topics
  • Selective Catalytic Reduction (SCR) system
  • Mechanical Front Drive (MFD)
  • Differential lock system
  • Suspended axle
  • Ride control
  • Engine power boost
  • Constant engine speed
  • Suspended cab
  • Electronic end of row system
  • Automatic park lock
    • Tractor warning lamps and Slow Moving Vehicle (SMV) symbol
    • Wide transport marker light
    • Tractor warning lamps
    • Safe transport speed
    • Implement warning lamps and Slow Moving Vehicle (SMV) symbol
    • Safety chain
    • Securing the tractor for shipping
    • Safety rules
    • Towing the tractor
    • Overview
    • Safety rules
    • Connecting the Power Take-Off (PTO)
    • Interchangeable Power Take-Off (PTO) shaft
    • Rear Power Take-Off (PTO) operation
    • Power Take-Off (PTO) fender switch operation
    • Auto Power Take-Off (PTO) operation
    • Overview
    • Front Power Take-Off (PTO) operation
    • Identification
    • Link adjustment
    • Hitch high clearance adjustment
    • Hydraulic links
    • Sway limiter adjustment
    • Lower link block adjustment
    • Mechanical float adjustment
    • Hitch quick coupler - Category III/IIIN
    • Hitch quick coupler - Category IVN
    • Hitch operation
    • Hitch remote switch operation
    • Position control operation
    • Load control operation
    • Slip control operation
    • Hitch set point
    • Overview
    • Front hitch operation
    • Safety rules
    • Drawbar capacity/position
    • Adjusting the drawbar
    • Auxiliary power and lighting
    • Cab power connections
    • Radar connection
    • Implement ISOBUS connector
    • Valve couplers and connections
    • Motor return circuit
    • Power beyond circuit
    • Flow capacity
    • Hydraulic transport lock
    • Operating the controls
    • Remote valve display screens
    • Auto depth control
    • Joystick operation
    • Guidelines
    • Tire load and inflation charts
    • Weights, cast metal
    • Wheel slip and power hop performance
    • Front axle identification
    • Tire combinations and tread positions
    • Steering and oscillation stops
    • Tread and fender settings - Class 4.5 fixed front axles
    • Tread and fender settings - Class 4.75 and 5.0 fixed front axles
    • Tread and fender settings - Class 4.75 and 5.0 saddle suspended front axles
    • Front wheel fenders - Narrow fenders, fixed or saddle suspended
    • Front wheel fenders - Wide fenders, fixed or saddle suspended
    • Rear wheel installation
    • Rear wheel tread settings
    • Dual/triple wheel setup for 508 mm (20 in)/559 mm (22 in) row spacing
    • Adjustable rear wheel
    • Safety rules
    • Dealer service and parts
    • Maintenance guidelines
    • Opening the hood
    • Closing the hood
    • Filling the fuel tank
    • Filling the Diesel Exhaust Fluid (DEF)/AdBlue® tank
    • Battery disconnect switch
    • Battery access and service
    • Tire and rim service
    • Tractor jacking points
    • Capacities
    • Consumables - Engine oil
    • Consumables - Transmission/hydraulic system fluid
    • Consumables - Diesel fuel
    • Consumables - Biodiesel fuels
    • Consumables - Diesel exhaust fluid (DEF)/AdBlue®
    • Consumables - Coolant solution for Tier 4b engines
    • Electrical component location
    • Lamps and bulbs
    • Maintenance chart notes
    • Maintenance Chart
    • Air filter service icon/message
    • Water in fuel message
    • Transmission oil filter switch
    • Hydraulic oil filter switch
    • Wheel bolt torque
    • Weight bolt torque
    • Differential and planetary oil
    • Engine oil level
    • Transmission oil level
  • Engine coolant level
  • Air reservoir
  • Rear hitch and front axle
  • Engine auxiliary fuel filter
  • Front hitch
  • Front Power Take-Off (PTO) drive shaft
  • Battery water level (Note E)
  • Engine air intake and exhaust hoses
  • Engine coolant level - deaeration tank
  • Wheel bolt torque
  • Weight bolt torque
  • Front axle (Note A)
  • Rear hitch (Note A)
  • Fuel tank
  • Differential and planetary oil level (Note B)
  • Transmission oil pressure
  • Front Power Take-Off (PTO) oil level
  • Cab air filter
  • Engine oil and filter
  • Engine coolant antifreeze protection
  • Engine coolant hoses and clamps
  • Engine fuel filter
  • Fuel system bleeding
  • Changeable Power Take-Off (PTO) internal splines
  • Diesel Exhaust Fluid (DEF)/AdBlue® in-line filter
  • Front Power Take-Off (PTO) oil and filter
  • Engine air precleaner
  • Pneumatic brake system dryer
  • Differential and planetary oil
  • Engine air filters
    • Transmission oil
    • Hydraulic oil filter
    • Transmission oil filter
    • Engine crankcase filter
    • Engine valve adjustment (Note C)
    • Diesel Exhaust Fluid (DEF)/AdBlue® supply module filter
    • Engine coolant
    • Vehicle fire prevention
    • Cab air filter
    • Grille screen and radiator area
    • Fuel tank vent filter
    • Transmission clutch and accumulator
    • Tire pressure
    • Fan belt
    • Diesel Exhaust Fluid (DEF)/AdBlue® tank
    • Remote valve collection bottle
    • Cab fabric and carpet
    • Seat belt
    • Preparing for storage
    • Removal from storage
    • Radio or audio system
    • Battery removal and installation
    • Auxiliary battery connections
    • Headlight
    • Flood and work light
    • Fender tail light and warning light
    • Roof front warning and work light
    • Roof rear warning light
    • High intensity work light
    • Wide transport marker light
    • Rotating beacon light
    • Interior light
    • Display warnings overview
    • Display warnings - Level 1
    • Display warnings - Level 2
    • Display warnings - Level 3
    • Display warnings - Level 4
    • Engine symptoms
    • Transmission symptoms
    • Hydraulic symptoms
    • Hitch symptoms
    • Brake symptoms
    • Cab environment symptoms
    • Electrical power system symptoms
Engine specifications
Power train specifications
Operating speeds
Vehicle dimensions and shipping weight
Maximum operating weight
Farming system displays
Chemical tank mounting
Loader connection and operation
Trailer brake connections
General accessories

Inside this manual

Real pages from this operator's manual (634 pages). Open the sample pages (PDF, 555 KB)

Sample pages from the Case Magnum 250, 280, 310, 340, 380 Tractor Operator's Manual: Controls and operation, Specifications, Maintenance
  • Controls and operation, page 289: Hitch operation
  • Specifications, page 343: Front weight
  • Maintenance, page 541: 7 - MAINTENANCE

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operator's Manual 47585531$69.89
Other manuals for the Magnum 250

Service manuals

Details
Details
Details
Details
Details
Details
Details
Details
Details
Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 634 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Binder not included

Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.

Other editions and similar models

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).