Komatsu 830E-1AC Dump Truck Operation & Maintenance Manual
255 pages · Publication CEAM031300
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Added to your cart. View cart
- Models
- 830E-1AC
- Serial coverage
- A40993 and up
- Manual type
- Operation & Maintenance Manual
- Pages
- 255
- Publication
- CEAM031300
- Condition
- Brand new
What's inside
From the manual's own table of contents: 133 sections, 499 entries. See sample pages (PDF, 596 KB)
FOREWORD
ABOUT THIS MANUAL
WARNINGS1 topic
- California Proposition 65 Warnings
ALERTS
TRUCK MODEL ILLUSTRATION
PARTS IN CRITICAL SYSTEMS
GENERAL INFORMATION2 topics
- Effect Of Special Lubricants
- Suggested Sources For Rust Preventive Grease
STANDARD TIGHTENING TORQUES10 topics
- Class 10.9 Capscrews And Class 10 Nuts
- SAE Grade 5 And Grade 8 Capscrews
- SAE Grade 9 Capscrews
- T-Bolt Clamps
- Split Flange Clamps
- Flared Tube And Hose Fittings
- JIC 37° Swivel Nuts
- Pipe Thread Fittings
- O-Ring Boss Fittings
- O-Ring Face Seal Fittings
CONVERSION MULTIPLIERS3 topics
- Metric To English
- English To Metric
- Temperature Conversions
GENERAL SAFETY14 topics
- Safety Rules
- Truck Safety Features
- Clothing And Personal Items
- Unauthorized Modification
- Leaving The Operator’s Seat
- Mounting And Dismounting
- Fire Extinguishers And First Aid Kits
- Precautions For High Temperature Fluids
- Asbestos Dust Hazard Prevention
- Fire Prevention
- ROPS Precautions
- Preventing Injury From Work Equipment
- Precautions For Optional Attachments
- Precautions When Starting The Machine
PRECAUTIONS FOR TRUCK OPERATION8 topics
- Safety Is Thinking Ahead
- Safety At The Worksite
- Preparing For Operation
- Ventilation For Enclosed Areas
- Mirrors, Windows, And Lights
- Before Starting The Engine
- Seat Belts And Tethers
- Emergency Egress Ladders
OPERATING THE MACHINE14 topics
- General Information
- Starting The Engine
- Traveling In The Machine
- Traveling In Reverse
- Traveling On Slopes
- Traveling On Snow
- Traveling Near High Voltage Cables
- Traveling On Loose Ground
- Ensuring Good Visibility
- Avoid Damage To The Dump Body
- Safe Parking Of The Machine
- Loading The Machine
- Dumping The Machine
- Towing The Machine
EXTERIOR LIGHTING10 topics
- Fog Lights
- Deck Mounted Flood Lights
- Headlights
- Brake Lights
- Retard Lights
- Clearance/Turn Signal Lights
- Mirror Mounted Backup Lights
- Backup Lights
- Backup Alarm
- HID Backup Light
PRECAUTIONS FOR MAINTENANCE
BEFORE PERFORMING MAINTENANCE2 topics
- Electrical System Isolation
- Securing The Dump Body
DURING MAINTENANCE20 topics
- Warning Tag
- Proper Tools
- Attachments
- Working Under The Machine
- Keeping The Machine Clean
- Adding Fuel Or Oil To The Machine
- Radiator Coolant Level
- Use Of Lighting
- Handling High Pressure Hoses
- Precautions With High Pressure Oil
- Maintenance Near High Temperatures And High Pressures
- Rotating Fan And Belts
- Waste Materials
- Use Of Tie-Off Anchor During Maintenance
- Handling Tires
- Tire Maintenance
- Storing Tires After Removal
- Battery Hazard Prevention
- Jump Starting With Jumper Cables
- Jump Starting With Receptacles
WHEN REPAIRS ARE NECESSARY1 topic
- Observe The Following Precautions
SPECIAL PRECAUTIONS4 topics
- Preliminary Procedures Before Welding Or Performing Maintenance
- Engine Shutdown Procedure Before Welding or Performing Maintenance
- Before Welding On The Machine, Obey The Following Guidelines
- Discharging Control Cabinet Capacitors
PIN PLATE
GRADE SPEED CHART
MACHINE SAFETY
KEY SWITCH
OIL FILL AND CHECK
HIGH PRESSURES
Show all 133 sections
BATTERY AND ISOLATION BOX
HIGH VOLTAGE
WELDING
LIFTING POINTS
EMERGENCY DUMPING
AUTOMATIC LUBRICATION FILL
ROPS/FOPS
TOWING
LUBRICATION CHART
PREPARING FOR OPERATION2 topics
- Safety Is Thinking Ahead
- Walk Around Inspection
RETRACTABLE LADDER SYSTEM (If Equipped)6 topics
- General Information
- Ladder System Description
- Ladder System Operation
- In-Cab Control Panel
- Ground Level Control Box
- Emergency Down Valve
BRAKE TEST5 topics
- Operation
- Service Brake Test
- Parking Brake Test
- Retard System Test
- Brake Test Exit Criteria
TRUCK OPERATION17 topics
- ENGINE START-UP SAFETY
- After Engine Has Started
- MACHINE OPERATION SAFETY PRECAUTIONS
- Machine Operation On The Haul Road
- Starting On A Grade With A Loaded Truck
- Retarding On A Grade
- Passing
- Loading
- Overload Speed Limit Function
- Dumping
- Lowering The Dump Body (When Dumping On Flat Ground)
- Lowering The Dump Body (When Dumping Over A Berm Or Into A Crusher)
- SUDDEN LOSS OF ENGINE POWER OR LOSS OF DRIVE SYSTEM FUNCTION
- EMERGENCY STEERING SYSTEM
- Operation
- Pre-Operation Testing
- Additional Guidelines
KOMVISION (If Equipped)23 topics
- KomVision System Precautions
- Component Locations
- Monitor Panel
- Brightness Switches
- System Power Status Indicator
- Force Display Switch
- Camera Switches
- Monitor Display Mode Switch
- Reference Line Display Switch
- Lower Body Display Switch
- Object Clear Switch
- Monitor Display
- Camera Display Modes
- Bird’s Eye Views
- Reference Lines
- Dump Body Status Display
- Error Code Display
- Initial Setting Screen
- Radar System
- Object Detection Range
- Object Detection Warnings
- Object Clear
- START-UP INSPECTION
FUEL DEPLETION
SAFE PARKING PROCEDURES
NORMAL ENGINE SHUTDOWN PROCEDURE
DISABLED TRUCK CONNECTORS
STEERING AND BRAKE SYSTEM1 topic
- Hookup
HOIST SYSTEM1 topic
- Dumping Procedure
SPECIAL WIRING HARNESS
TOWING PROCEDURE
PAYLOAD METER IV SYSTEM2 topics
- Data Summary
- Data Gathering
COMPONENT DESCRIPTION6 topics
- Electronic Dash Display
- Mode Switches
- Brake Lock Switch
- Payload Meter Module
- Communications Ports
- Load Lights
OPERATOR’S DISPLAY AND SWITCH24 topics
- Menu Navigation
- Reading The Load Display
- Setting The Operator ID
- Load And Ton Counter
- Viewing Live Sensor Data
- Other Display Messages
- HAUL CYCLE WARNINGS
- Haul Cycle System Configuration
- Haul Cycle Warning Flags
- SYSTEM CONFIGURATION
- Connecting To The Payload Meter IV Web Server
- Configuring Static IP Address
- Real Time Data Page
- Payload Meter IV System Configuration
- Truck Data Configuration
- Inclinometer Calibration
- Overload Threshold
- Clean Truck Tare
- Custom Truck Configuration
- Start Flash Program
- Viewing Haul Cycle Data
- Downloading Haul Cycle Data
- Viewing Alarm Data
- Downloading Alarm Data
AUTOMATIC LUBRICATION SYSTEM21 topics
- GENERAL INFORMATION
- COMPONENT DESCRIPTION
- Filter
- Hydraulic Motor and Pump
- Grease Reservoir
- Pressure Reducing Valve
- Flow Control Valve
- Solenoid Valve
- Vent Valve
- Interface Module
- Injectors
- Relief Valve (unloader valve)
- SYSTEM OPERATION
- Filling The Reservoir
- Priming The Automatic Lubrication System
- PREVENTIVE MAINTENANCE PROCEDURES
- Daily Lubrication System Inspection
- Hour Inspection
- SYSTEM CHECKOUT
- General Checks
- Lubrication Cycle Operation
RESERVE ENGINE OIL SYSTEM (if equipped)3 topics
- Operation
- LED Monitor Light
- Changing Oil
CAB INTERIOR
STEERING WHEEL AND CONTROLS6 topics
- Horn Button
- Tilt / Telescope Lever
- Multi-Function Turn Signal Switch
- Turn Signal Operation
- High Beam Headlight Operation
- Windshield Wiper Operation
PEDALS4 topics
- Service Brake Pedal
- Dynamic Retard Pedal
- Dynamic Retarding
- Accelerator Pedal
OVERHEAD PANEL AND DISPLAYS5 topics
- Radio Speakers
- Warning Alarm Buzzer
- Cab Radio
- Air Cleaner Vacuum Gauges
- KomVision™Panel
CENTER CONSOLE13 topics
- Directional Control Lever
- Override/Fault Reset Switch
- Engine Stop Switch
- Window Control Switches
- Hoist Control Lever
- Raising The Dump Body
- Lowering The Dump Body
- Retard Speed Control (RSC) Adjust Dial
- Retard Speed Control (RSC) Switch
- Data Store Button
- 12V Auxiliary Power Outlets
- Fire Suppression Control Outlet
- Communication Radio Outlet
DIAGNOSTIC PORTS6 topics
- KOMTRAX Plus
- Interface Module (IM)
- Payload Meter
- Drive System Controller (DSC)
- Engine (Cense)
- Engine (Quantum)
OPERATOR SEAT (Standard)2 topics
- Seat Belts And Tethers
- Adjustment
PASSENGER SEAT (Standard)
OPERATOR SEAT (Optional)
PASSENGER SEAT (Optional)
HEATER / AIR CONDITIONER CONTROLS4 topics
- Fan Speed Control Knob
- Temperature Control Knob
- Air Flow Directional Knob
- Heater/Air Conditioner Vents
INSTRUMENT PANEL25 topics
- Control Symbols
- Cab/Air Conditioner Vents
- Status Indicator Light Panel
- Hydraulic Oil Temperature Gauge
- Coolant Temperature Gauge
- Speedometer/Digital Display
- Fuel Level Gauge
- Drive System Temperature Gauge
- Hazard Warning Light Switch
- Pre-Shift Brake Test Switch
- Wheel Brake Lock Control Switch
- Rest Switch
- Engine Warm Up
- Heated Mirror Switch (Optional)
- Rotating Beacon Light Switch (Optional)
- Key Switch
- Warning Light
- Digital Display Contrast Buttons
- Turn Signal Indicators
- Panel Light Dimmer
- Mode Switches
- Fog Light Switch
- Backup Light Switch
- Ladder Light Switch
- Headlight/Panel Illumination Light Switch
STATUS INDICATOR LIGHT PANEL17 topics
- STATUS INDICATOR LIGHT SYMBOLS
- Body Up
- Parking Brake
- Propel System Not Ready
- No Propel
- Engine Warm Up
- Engine Shutdown Delay
- Retarding Grid Drier
- Wheel Brake Lock
- Traction Control
- Repair Monitor
- Snapshot In Progress
- Pantograph Energized
- Pantograph Up
- Service Brake
- Dynamic Retarding
- No DC Link Voltage
DIGITAL DISPLAY OPERATION3 topics
- Toggling Through Main Level Screens
- Toggling Through Warning Screens
- Entering Payload Meter Data
KOMTRAX Plus7 topics
- KOMTRAX Plus OPERATION
- Basic Precautions
- Interface Module
- DOWNLOADING KOMTRAX Plus DATA
- General Information
- KOMTRAX Plus Downloading Procedure
- Location Of Downloaded Files
UPLOADING KOMTRAX Plus DATA
ORBCOMM
KOMATSU WIRELESS BRIDGE (Bullet M2)5 topics
- Communication Setup
- Setting The Computer Subnet Mask And IP Address
- Adding Encryption
- Downloading Data
- Resetting The KWB
FUSES AND CIRCUIT BREAKERS
VEHICLE ELECTRICAL CENTER 89
VEHICLE ELECTRICAL CENTER 90
VEHICLE ELECTRICAL CENTER 91
CIRCUIT BREAKERS
HYDRAULIC SYSTEM SERVICE3 topics
- Hydraulic Tank
- Hydraulic Filters
- Hydraulic Pump Drive Shaft
WHEEL MOTOR SERVICE
COOLANT LEVEL SERVICE3 topics
- Radiator Filling Procedure
- Coolant Specifications
- Unacceptable Practices
RESERVE ENGINE OIL SERVICE4 topics
- LED Monitor Lights
- Sight Gauge
- Reserve Oil Tank Filling Procedure (Remote Fill)
- Inline Screen
CAB AIR FILTER SERVICE
FUEL SYSTEM SERVICE2 topics
- Fuel Tank Cleaning
- Fuel Filter Service
INTAKE AIR CLEANER SERVICE
FRONT WHEEL SERVICE1 topic
- Oil Sampling
FRONT ENGINE MOUNT TRUNNION SERVICE
QUICK FILL SERVICE CENTER
TIE ROD INSPECTION AND TORQUE PROCEDURE
EVERY 10 HOUR (DAILY) MAINTENANCE
INITIAL 50 HOUR LUBRICATION AND MAINTENANCE INSPECTION
INITIAL 100 HOUR LUBRICATION AND MAINTENANCE INSPECTION
EVERY 250 HOUR LUBRICATION AND MAINTENANCE
EVERY 500 HOUR LUBRICATION AND MAINTENANCE
EVERY 1000 HOURS LUBRICATION AND MAINTENANCE
EVERY 2500 HOUR MAINTENANCE
EVERY 4000 HOUR MAINTENANCE
EVERY 5000 HOUR MAINTENANCE
EVERY 18,000 HOUR MAINTENANCE
MAJOR COMPONENT DESCRIPTION
Truck And Engine8 topics
- Traction Alternator
- Main Control Cabinet
- AC Induction Traction Motorized Wheels
- Suspension
- Operator's Cab
- Power Steering
- Dynamic Retarding Grid
- Brake System
SPECIFICATIONS12 topics
- Engine
- AC Electric Drive System
- Battery Electric System
- Service Capacities
- Hydraulic Systems
- Service Brakes
- Parking Brake
- Steering
- Standard Dump Body Capacities And Dimensions
- Tires
- Weight Distribution
- Overall Truck Dimensions
AM/FM RADIO / CD / MP3 / USB / iPOD™/ AUX PLAYER19 topics
- PHONE/Bluetooth Button
- Digital Display
- CD Slot
- Volume Knob/OK Button
- SRC/PWR (Source/Power) Button
- NEXT Button
- Eject Button
- USB Connection Port
- Auxiliary Jack Port
- SCAN/ASCN (Scan/Autoscan) Button
- PREV (Previous) Button
- DISP (Display) Button
- ESC (Escape) Button
- RDM (Random) Button
- RPT (Repeat) Button
- Clock/Alarm Button
- Browse Button
- Play/Pause Button
- Preset Buttons
GENERAL FEATURES2 topics
- Audio Sources
- Bluetooth Pairing
RADIO OPERATION7 topics
- Tuning
- Scanning
- Performing a Regular Scan
- Performing an Autoscan
- Station Presets
- Storing Radio Station Presets
- Tuning Radio Station Presets
CD OPERATION
Using the CD Player
Playing a CD
Ejecting a CD
IPOD OPERATION
iPod Support
Connecting an iPod
Accessing iPod Menus
USB DEVICE OPERATION
Supported USB Devices
Supported File Types
Connecting a USB Device
Accessing USB Folders
Accessing USB Playlists
Scanning a USB Device
AUXILIARY DEVICE OPERATION
BLUETOOTH OPERATION
Bluetooth Menu
Enabling/Disabling Bluetooth
Pairing a Bluetooth Device
Deleting Previously Paired Devices
Connecting a Device
Disconnecting a Device
RECEIVER SYSTEM SETTINGS
AUDIO CONTROL MENU6 topics
- Adjusting Audio Settings
- Audio Adjustment Options
- Adjusting the Clock
- Setting an Alarm
- Canceling an Alarm
- Turning off or Snoozing an Activated Alarm
USER MENU2 topics
- Adjusting User Settings
- User Adjustment Options
TROUBLESHOOTING
Radio Troubleshooting
CD Player Troubleshooting
iPod Troubleshooting
USB Troubleshooting
Bluetooth Troubleshooting
Inside this manual
Real pages from this operation & maintenance manual (255 pages). Open the sample pages (PDF, 594 KB)
- Specifications, page 58: GENERAL SAFETY
- Controls and operation, page 100: TRUCK OPERATION
- Maintenance, page 220: LUBRICATION AND SERVICE
- Color page, page 208: LUBRICATION AND SERVICE
- Color page, page 137: PAYLOAD METER IV SYSTEM
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the 830E-1AC are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
This manual: Operation & Maintenance Manual CEAM031300$69.71
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
This manual
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 255 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).