Komatsu PC210-7K, PC210LC-7K, PC210NLC-7K, PC230NHD-7K, PC240LC-7K, PC240NLC-7K Hydraulic Excavator Operation & Maintenance Manual
367 pages · Publication UEAM003900
Added to your cart. View cart
- Models
- PC210-7K, PC210LC-7K, PC210NLC-7K, PC230NHD-7K, PC240LC-7K, PC240NLC-7K
- Serial coverage
- PC210-7K K41848 and up, PC210LC-7K K41848 and up, PC210NLC-7K K41848 and up, PC230NHD-7K K40181 and up, PC240LC-7K K40001 and up, PC240NLC-7K K40001 and up
- Manual type
- Operation & Maintenance Manual
- Pages
- 367
- Publication
- UEAM003900
- Condition
- Brand new
What's inside
From the manual's own table of contents: 99 sections, 164 entries. See sample pages (PDF, 410 KB)
SAFETY INFORMATION1 topic
- VIBRATION
INTRODUCTION2 topics
- DIRECTIONS OF MACHINE
- BREAKING-IN THE NEW MACHINE
PRODUCT INFORMATION5 topics
- MACHINE SERIAL NUMBER PLATE AND ITS LOCATION
- ENGINE SERIAL NUMBER PLATE AND ITS LOCATION
- SERVICE METER LOCATION
- TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- MACHINE SERIAL PLATE
POSITION FOR ATTACHING SAFETY LABELS1 topic
- SAFETY LABELS
SAFETY MACHINE OPERATION6 topics
- STARTING ENGINE
- OPERATION
- TRANSPORTATION
- BATTERY
- TOWING
- LIFTING OBJECTS WITH BUCKET
Show all 99 sections
REPLACEMENT AND INVERSION OF BUCKET3 topics
- PARKING MACHINE
- CHECK AFTER FINISHING WORK
- LOCKING
TRANSPORTATION4 topics
- TRANSPORTATION PROCEDURE
- SPECIAL TRANSPORTATION INSTRUCTIONS FOR PC210NLC-7 AND PC230NHD-7
- LOADING AND UNLOADING WITH TRAILER
- LIFTING MACHINE
COLD WEATHER OPERATION3 topics
- COLD WEATHER OPERATION INFORMATION
- AFTER DAILY WORK COMPLETION
- AFTER COLD WEATHER SEASON
LONG TERM STORAGE3 topics
- BEFORE STORAGE
- DURING STORAGE
- AFTER STORAGE
TROUBLESHOOTING7 topics
- AFTER RUNNING OUT OF FUEL
- PHENOMENA THAT ARE NOT FAILURES
- TOWING THE MACHINE
- LIGHTWEIGHT TOWING HOOK
- PRECAUTIONS ON PARTICULAR JOBSITES
- DISCHARGED BATTERY
- OTHER TROUBLE
LUBRICANTS, COOLANT AND FILTERS4 topics
- HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
- EXPLANATION OF LUBRICATION CHART DECAL
- ELECTRIC SYSTEM MAINTENANCE
- HANDLING HYDRAULIC SYSTEM
USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE1 topic
- PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS
TIGHTENING TORQUE SPECIFICATIONS1 topic
- TIGHTENING TORQUE LIST
PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS1 topic
- SAFETY CRITICAL PARTS
COMBINATIONS OF WORK EQUIPMENT7 topics
- SELECTION OF TRACK SHOES
- SELECTION OF BUCKET TEETH
- STANDARDS FOR SELECTING VERTICAL PIN TYPE AND HORIZONTAL PIN TYPE TEETH
- HANDLING OF RUBBER PAD SHOE AND ROAD LINER
- HANDLING TRAPEZOIDAL BUCKET
- HANDLING EXTENSION ARM
- HANDLING CLAMSHELL BUCKET
RECOMMENDED ATTACHMENT OPERATIONS1 topic
- HYDRAULIC BREAKER
BOOM1 topic
- FEATURES OF 2-PIECE BOOM & ARM
STRAIGHT BOOM PC210/240-7K4 topics
- WORKING RANGE (PC 210 STRAIGHT BOOM)
- TRANSPORTATION (PC 210 Straight Boom equipment)
- WORKING RANGE (PC 240 STRAIGHT BOOM)
- TRANSPORTATION (PC 240 Straight Boom equipment)
OPERATION INSTRUCTION FOR SUPER LONG FRONT BOOM AND ARM7 topics
- CONTROL LEVERS, PEDALS
- TRANSPORT & STORAGE OF SUPER LONG FRONT MACHINE
- WORKING RANGE OF SUPER LONG FRONT
- LIFTING CAPACITY PC210 LC 15 m SUPER LONG FRONT
- LIFTING CAPACITY PC210 NLC 15 m SUPER LONG FRONT
- LIFTING CAPACITY PC240 LC 18 m SUPER LONG FRONT
- LIFTING CAPACITY PC240 NLC 18 m SUPER LONG FRONT
MAINTENANCE3 topics
- SPECIAL SERVICE REQUIREMENTS FOR SUPER LONG FRONT WORK EQUIPMENT
- EVERY 50 HOURS SERVICE
- EVERY 100 HOURS SERVICE
Inside this manual
Real pages from this operation & maintenance manual (367 pages). Open the sample pages (PDF, 409 KB)
- Controls and operation, page 162: MACHINE OPERATIONS AND CONTROLS
- Maintenance, page 262: MAINTENANCE
- Specifications, page 282: SPECIFICATIONS
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the PC210-7K, PC240LC-7K are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 367 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Binder not included
Manuals over about 300 pages may need a standard 3-ring binder, which you can buy locally to keep the pages organized for shop use.
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).