Skyjack SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS Telehandler Operating Manual
97 pages · Publication 194825AJA
Added to your cart. View cart
- Models
- SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS
- Serial coverage
- SJ1044 TH/THS: 87210001 - 87210029
- SJ1056 TH/THS: 87310001 - 87310412
- Manual type
- Operating Manual
- Pages
- 97
- Publication
- 194825AJA
- Condition
- Brand new
What's inside
From the manual's own table of contents: 84 topics. See sample pages (PDF, 525 KB)
- Section 1 - About Your Telehandler
- Telehandler Definition
- Purpose of Equipment
- Use of Equipment
- Manual
- Operator
- Service Policy and Warranty
- Optional Accessories
- Scope of this Manual
- Safety Rules
- Operator Safety Reminders
- Electrocution Hazard
- Symbols & Nomenclature
- Forklift Hand Signals
- Section 2 - Operation
- General
- 2.1-1 Operator Qualifications
- 2.1-2 Operator’s Responsibility for Maintenance
- 2.1-3 Maintenance and Inspection Schedule
- 2.1-4 Owner’s Inspections
- Major Components
- Major Assemblies
- 2.3-3 Boom Assembly
- 2.3-4 Attachment
Show all 84 topics
- Serial Number Nameplate
- Component Identification
- 2.5-1 Operator’s Cab
- 2.5-2 Operator’s Cab Controls
- 2.5-3 Engine Data Display Module
- Component Identification (Special Options)
- 2.6-1 Positive Air Shutoff Switch (if equipped)
- 2.6-2 Optional Reserve Braking System (if equipped)
- 2.6-3 Flashing Beacon (if equipped)
- 2.6-4 Road Lights, Boom Lights & Work Lights (if equipped)
- Operator’s Responsibility
- Visual & Daily Maintenance Inspections
- 2.8-2 Electrical
- 2.8-4 Hydraulic
- 2.8-5 Cylinders
- 2.8-7 Engine Compartment
- 2.8-8 Transmission
- 2.8-10 Lifting Attachment
- 2.8-11 Grease Fittings
- 2.8-12 Operator’s Cab
- Function Tests
- 2.9-1 Operator’s Cab Controls
- Start Operation
- 2.10-1 Starting the Engine
- 2.10-2 Driving the Telehandler
- 2.10-3 Driving on Slopes
- 2.10-4 Steering the Telehandler
- 2.10-5 Leveling the Telehandler
- 2.10-6 Raising or Lowering Boom
- 2.10-7 Extending or Retracting Boom
- 2.10-8 Tilting the Attachment
- 2.10-9 Handling Loads
- 2.10-10 Parking and Shutting-down the Telehandler
- Refueling Procedure
- 2.11-1 Diesel Fuel
- 2.11-2 Diesel Exhaust Fluid (DEF) (if equipped)
- Selective Catalytic Reduction (SCR) and Standstill
- 2.12-1 Standstill
- Use of the Capacity Charts
- 2.13-1 Examples on Reading the Capacity Chart
- Attachments Installation and Operation
- 2.14-1 Installing Attachments Using the Quick Attach Feature
- 2.14-2 Removing Attachments Using the Quick Attach Feature
- 2.14-3 Handling Loads at Ground Level
- 2.14-4 Handling Loads at Variable Heights
- 2.14-5 Adjusting Forks
- 2.14-6 Changing Forks
- 2.14-7 Slinging Loads
- Optional Attachments
- 2.15-1 Side Tilt Carriage
- 2.15-2 Swing Carriage
- 2.15-3 Block Forks
- 2.15-5 Loader Bucket
- 2.15-7 Third-Party Attachments & Platforms for Elevating Personnel
- Loading and Transporting
- 2.16-1 Loading and Tie-down
- 2.16-3 Towing the Telehandler
- 2.16-4 Using the telehandler as a tow vehicle
- Tables
- Labels
Inside this manual
Real pages from this operating manual (97 pages). Open the sample pages (PDF, 524 KB)
- Controls and operation, page 44: Function Tests
- Specifications, page 59: Procedures
- Maintenance, page 78: Tables
- Color page, page 14: SJ1044 TH/THS
- Color page, page 67: SJ1044 TH/THS
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 97 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).