MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Skyjack SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS Telehandler Operating Manual

113 pages · Publication 229076AGA

$69.87
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS
Serial coverage
  • SJ1044 TH/THS: 87210155 & above
  • SJ1056 TH/THS: 87311608 & above
  • SJ1256 THS: 87410574 & above
Manual type
Operating Manual
Pages
113
Publication
229076AGA
Condition
Brand new
Skyjack SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS Telehandler Operating Manual, publication 229076AGA

What's inside

From the manual's own table of contents: 9 sections, 145 entries. See sample pages (PDF, 520 KB)

Section 1 – About Your Telehandler16 topics
  • Read and Heed
    • 1.1-1 Telehandler Definition
    • 1.1-2 Purpose of Equipment
    • 1.1-3 Use of Equipment
    • 1.1-5 Operator
    • 1.1-6 Service Policy and Warranty
    • 1.1-7 Ownership of Machine
    • 1.1-8 Optional Accessories
    • 1.1-9 Scope of this Manual
  • Symbols & Nomenclature
  • Forklift Hand Signals
  • Major Assemblies
  • Serial Number Nameplate
  • Operator’s Responsibility for Maintenance
    • 1.6-1 Maintenance and Inspection Schedule
    • 1.6-2 Owner’s Inspections
Section 2 – Operator Safety4 topics
  • Electrocution Hazard
  • Safety Precautions
  • Cab Access
  • Jobsite Inspection
Section 3 – Familiarization34 topics
  • Component Identification
  • Manual Storage Box
  • Control Functions
    • 3.3-1 Operator’s Cab Controls
    • 3.3-2 Standard Multi-functional Joystick
    • 3.3-3 Premium Multi-functional Joystick (If Equipped)
    • 3.3-4 Operator’s Cab Dash Controls
  • Safety Features and Devices
    • 3.4-1 Reverse Alarm
    • 3.4-2 Parking Brake
    • 3.4-3 Operator’s Cab
    • 3.4-4 Operator’s Seat
    • 3.4-5 RAS (Rear Axle Stabilization) System
    • 3.4-6 Boom Interlock
    • 3.4-7 Frame Level
  • General Components
    • 3.5-1 Outriggers (If Equipped)
  • Optional Equipment
    • 3.6-1 Positive Air Shutoff Switch (If Equipped)
    • 3.6-2 Reserve Braking System (If Equipped)
    • 3.6-3 Flashing Beacon (If Equipped)
    • 3.6-4 Road Lights, Boom Lights & Work Lights (If Equipped)
    • 3.6-5 Fire Extinguisher (If Equipped)
    • 3.6-6 Back-up Sensor with Display Buzzer (If Equipped)
    • 3.6-7 Back-up Sensor/Camera with Monitor (If Equipped)
    • 3.6-8 Back-up Camera and Sensor System with Monitor (If Equipped)
    • 3.6-9 Multi-view Camera and Sensor System with Monitor (If Equipped)
  • Optional Attachments
    • 3.7-1 Side Tilt Carriage
    • 3.7-2 Swing Carriage
    • 3.7-3 Block Forks
    • 3.7-5 Loader Bucket
    • 3.7-6 Truss Boom
    • 3.7-7 Fork Positioner
Section 4 – Pre-operation28 topics
  • Operator’s Responsibility
  • Visual & Daily Maintenance Inspections
    • 4.2-2 Electrical
    • 4.2-3 Hydraulic
    • 4.2-4 Cylinders
    • 4.2-7 Engine Compartment
    • 4.2-8 Transmission
    • 4.2-10 Lifting Attachment
    • 4.2-11 Grease Fittings
    • 4.2-12 Operator’s Cab
    • 4.2-13 Operator’s Cab Controls
  • Function Tests
    • 4.3-1 Test Starter Operation
    • 4.3-3 Test Lights (If Equipped)
    • 4.3-4 Test Boom Functions
    • 4.3-5 Test Attachment Functions
    • 4.3-6 Test Frame Leveling and Level Indicator
    • 4.3-7 Test Boom Interlock & Rear Axle Stabilization (RAS) System
    • 4.3-8 Test Accelerator Pedal
    • 4.3-9 Test Reverse Alarm, Driving, and Service Brake
    • 4.3-10 Test Parking Brake
    • 4.3-11 Test Steering
    • 4.3-12 Test Outriggers (If Equipped)
    • 4.3-13 Test Back-up Sensor with Display Buzzer (If Equipped)
    • 4.3-14 Test Back-up Sensor/Camera with Monitor (If Equipped)
    • 4.3-15 Test the Back-up Camera and Sensor System with Monitor (If Equipped)
    • 4.3-16 Test the Multi-view Camera and Sensor System with Monitor (If Equipped)
  • Operator’s Checklist
Section 5 – Operation39 topics
  • Starting the Engine
  • Driving the Telehandler
    • 5.2-1 Driving on Level Terrain
    • 5.2-2 Driving on Slopes
  • Steering the Telehandler
    • 5.3-1 Four-wheel Steering
    • 5.3-2 Front Steering (Two-Wheel)
    • 5.3-3 Crab Steering
  • Operating the Boom
    • 5.4-1 Raising or Lowering Boom
    • 5.4-2 Extending or Retracting Boom
  • Leveling the Telehandler
  • Tilting the Attachment
  • Handling Loads
  • Handling Loads at Ground Level
    • 5.8-1 Picking up a Load
    • 5.8-2 Transporting a Load
    • 5.8-3 Placing a Load
  • Handling Loads at Variable Heights
    • 5.9-1 Picking up a Load
    • 5.9-2 Placing a Load
  • Parking and Shutting Down the Telehandler
  • DEUTZ Engine Data Display Module
    • 5.11-1 Function Buttons
    • 5.11-2 Contrast & Illumination Settings
    • 5.11-3 Engine Main Display
    • 5.11-4 Quad Display
    • 5.11-5 Graphic Display
    • 5.11-6 Error Messages
    • 5.11-7 Display Configuration
  • Use of the Capacity Charts
    • 5.12-1 Examples on Reading the Capacity Chart
  • Attachments Installation and Adjustment
    • 5.13-1 Installing Attachments Using the Quick Attach Feature
    • 5.13-2 Removing Attachments Using the Quick Attach Feature
    • 5.13-3 Adjusting Forks
    • 5.13-4 Changing Forks
  • Slinging Loads
  • Third-Party Attachments
Section 6 – Additional Procedures10 topics
  • Refueling Procedure
    • 6.1-1 Diesel Fuel
    • 6.1-2 Diesel Exhaust Fluid (DEF) (If equipped)
  • Selective Catalytic Reduction (SCR) and Standstill
    • 6.2-1 Standstill
  • Loading, Tie-downs and Transporting
  • Towing the Telehandler
  • Using the Telehandler as a Tow Vehicle
    • 6.6-1 Towing Pin
    • 6.6-2 Pintle Hitch (If Equipped)
Section 7 – Specifications5 topics
  • Standard and Optional Equipment
  • Specifications and Features
  • Tire/Wheel Specifications
  • Recommended Fluids/Lubrications
  • Floor Loading Pressure
Section 8 – Labels
Section 9 – Unique Skyjack Features

Inside this manual

Real pages from this operating manual (113 pages). Open the sample pages (PDF, 518 KB)

Sample pages from the Skyjack SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS Telehandler Operating Manual: Maintenance, Controls and operation, Specifications, Color page, Color page
  • Maintenance, page 14: Operator’s Responsibility for Maintenance
  • Controls and operation, page 61: Section 5 – Operation
  • Specifications, page 69: Section 5 – Operation
  • Color page, page 19: SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS
  • Color page, page 68: SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operating Manual 229076AGA$69.87
Other manuals for the SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS

Service manuals

Details
Details

Parts manuals

Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 113 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Other editions and similar models

Skyjack SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THSOperating Manual · 194825AJA · $69.67Skyjack SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THSOperating Manual · 216202AHA · $69.97Skyjack SJ1256 THSOperating Manual · 205161AHA · $69.83

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).