Skyjack SJ1256 THS Telehandler Operating Manual
107 pages · Publication 205161AHA
Added to your cart. View cart
- Models
- SJ1256 THS
- Serial coverage
- SJ1256 THS: 87410001 - 87410573
- Manual type
- Operating Manual
- Pages
- 107
- Publication
- 205161AHA
- Condition
- Brand new
What's inside
From the manual's own table of contents: 9 sections, 142 entries. See sample pages (PDF, 469 KB)
Section 1 – About Your Telehandler16 topics
- Read and Heed
- 1.1-1 Telehandler Definition
- 1.1-2 Purpose of Equipment
- 1.1-3 Use of Equipment
- 1.1-5 Operator
- 1.1-6 Service Policy and Warranty
- 1.1-7 Ownership of Machine
- 1.1-8 Optional Accessories
- 1.1-9 Scope of this Manual
- Symbols & Nomenclature
- Forklift Hand Signals
- Major Assemblies
- Serial Number Nameplate
- Operator’s Responsibility for Maintenance
- 1.6-1 Maintenance and Inspection Schedule
- 1.6-2 Owner’s Inspections
Section 2 – Operator Safety4 topics
- Electrocution Hazard
- Safety Precautions
- Cab Access
- Jobsite Inspection
Section 3 – Familiarization32 topics
- Component Identification
- Manual Storage Box
- Control Functions
- 3.3-1 Operator’s Cab Controls
- 3.3-2 Standard Multi-functional Joystick
- 3.3-3 Premium Multi-functional Joystick (If Equipped)
- 3.3-4 Operator’s Cab Dash Controls
- Safety Features and Devices
- 3.4-1 Reverse Alarm
- 3.4-2 Parking Brake
- 3.4-3 Operator’s Cab
- 3.4-4 Operator’s Seat
- 3.4-5 RAS (Rear Axle Stabilization) System
- 3.4-6 Boom Interlock
- 3.4-7 Frame Level
- General Components
- 3.5-1 Outriggers
- Optional Equipment
- 3.6-1 Positive Air Shutoff Switch (If Equipped)
- 3.6-2 Reserve Braking System (If Equipped)
- 3.6-3 Flashing Beacon (If Equipped)
- 3.6-4 Road Lights, Boom Lights & Work Lights (If Equipped)
- 3.6-5 Fire Extinguisher (If Equipped)
- 3.6-6 Back-up Sensor with Display Buzzer (If Equipped)
- 3.6-7 Back-up Sensor/Camera with Monitor (If Equipped)
- Optional Attachments
- 3.7-1 Side Tilt Carriage
- 3.7-2 Swing Carriage
- 3.7-3 Block Forks
- 3.7-5 Loader Bucket
- 3.7-6 Truss Boom
- 3.7-7 Fork Positioner
Section 4 – Pre-operation26 topics
- Operator’s Responsibility
- Visual & Daily Maintenance Inspections
- 4.2-2 Electrical
- 4.2-3 Hydraulic
- 4.2-4 Cylinders
- 4.2-7 Engine Compartment
- 4.2-8 Transmission
- 4.2-10 Lifting Attachment
- 4.2-11 Grease Fittings
- 4.2-12 Operator’s Cab
- 4.2-13 Operator’s Cab Controls
- Function Tests
- 4.3-1 Test Starter Operation
- 4.3-3 Test Lights (If Equipped)
- 4.3-4 Test Boom Functions
- 4.3-5 Test Attachment Functions
- 4.3-6 Test Frame Leveling and Level Indicator
- 4.3-7 Test Boom Interlock & Rear Axle Stabilization (RAS) System
- 4.3-8 Test Accelerator Pedal
- 4.3-9 Test Reverse Alarm, Driving & Service Brake
- 4.3-10 Test Parking Brake
- 4.3-11 Test Steering
- 4.3-12 Test Outriggers
- 4.3-13 Test Back-up Sensor with Display Buzzer (If Equipped)
- 4.3-14 Test Back-up Sensor/Camera with Monitor (If Equipped)
- Operator’s Checklist
Section 5 – Operation39 topics
- Starting the Engine
- Driving the Telehandler
- 5.2-1 Driving on Level Terrain
- 5.2-2 Driving on Slopes
- Steering the Telehandler
- 5.3-1 Four-wheel Steering
- 5.3-2 Front Steering (Two-Wheel)
- 5.3-3 Crab Steering
- Operating the Boom
- 5.4-1 Raising or Lowering Boom
- 5.4-2 Extending or Retracting Boom
- Leveling the Telehandler
- Tilting the Attachment
- Handling Loads
- Handling Loads at Ground Level
- 5.8-1 Picking up a Load
- 5.8-2 Transporting a Load
- 5.8-3 Placing a Load
- Handling Loads at Variable Heights
- 5.9-1 Picking up a Load
- 5.9-2 Placing a Load
- Parking and Shutting Down the Telehandler
- DEUTZ Engine Data Display Module
- 5.11-1 Function Buttons
- 5.11-2 Contrast & Illumination Settings
- 5.11-3 Engine Main Display
- 5.11-4 Quad Display
- 5.11-5 Graphic Display
- 5.11-6 Error Messages
- 5.11-7 Display Configuration
- Use of the Capacity Charts
- 5.12-1 Examples on Reading the Capacity Chart
- Attachments Installation and Adjustment
- 5.13-1 Installing Attachments Using the Quick Attach Feature
- 5.13-2 Removing Attachments Using the Quick Attach Feature
- 5.13-3 Adjusting Forks
- 5.13-4 Changing Forks
- Slinging Loads
- Third-Party Attachments
Section 6 – Additional Procedures11 topics
- Refueling Procedure
- 6.1-1 Diesel Fuel
- 6.1-2 Diesel Exhaust Fluid (DEF)
- Selective Catalytic Reduction (SCR) and Standstill
- 6.2-1 Standstill
- Lifting SJ1256 THS
- Loading, Tie-downs and Transporting
- Towing the Telehandler
- Using the Telehandler as a Tow Vehicle
- 6.6-1 Towing Pin
- 6.6-2 Pintle Hitch (If Equipped)
Section 7 – Specifications4 topics
- Standard and Optional Equipment
- Specifications and Features
- Tire/Wheel Specifications
- Recommended Fluids/Lubrications
Section 8 – Labels1 topic
- Model SJ1256 THS
Inside this manual
Real pages from this operating manual (107 pages). Open the sample pages (PDF, 468 KB)
- Maintenance, page 14: Operator’s Responsibility for Maintenance
- Controls and operation, page 26: Control Functions
- Specifications, page 82: Specifications and Features
- Color page, page 19: SJ1256 THS
- Color page, page 68: SJ1256 THS
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the SJ1256 THS are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 107 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).