Skyjack SJ3215 E, SJ3219 E, SJ3220 E, SJ3226 E, SJ3232 E, SJ4726 E, SJ4732 E, SJ4740 E Electric Scissor Lift Operation Manual
129 pages · Publication 249533AGA
Added to your cart. View cart
- Models
- SJ3215 E, SJ3219 E, SJ3220 E, SJ3226 E, SJ3232 E, SJ4726 E, SJ4732 E, SJ4740 E
- Serial coverage
- SJ3215 E: A100040000 - A100999999
- SJ3219 E: A100040000 - A100999999
- SJ3220 E: A101019000 - A101999999
- SJ3226 E: A101019000 - A101999999
- SJ3232 E: A101019000 - A101999999
- SJ4726 E: A102014000 - A102999999
- SJ4732 E: A102014000 - A102999999
- SJ4740 E: A103007000 - A103999999
- Manual type
- Operation Manual
- Pages
- 129
- Publication
- 249533AGA
- Condition
- Brand new

What's inside
From the manual's own table of contents: 9 sections, 120 entries. See sample pages (PDF, 485 KB)
Section 1 – About this Mobile Elevating Work Platform (MEWP)15 topics
- Read and Heed
- 1.1-1 Mobile Elevating Work Platform (MEWP) definition
- 1.1-2 Purpose of equipment
- 1.1-3 Use of equipment
- 1.1-4 Operation manual
- 1.1-5 Operator
- 1.1-6 Service policy and warranty
- 1.1-7 Ownership of machine
- 1.1-8 Optional accessories
- 1.1-9 Scope of this manual
- Primary assemblies
- Serial number nameplate
- Maintenance responsibility
- 1.4-1 Operator
- 1.4-2 Maintenance and inspection schedule
Section 2 – General Safety Precautions5 topics
- Electrocution hazards
- 2.1-1 Minimum distance from electrical conductors
- Safety instructions
- Fall protection
- Worksite inspection
Section 3 – Familiarization29 topics
- Overview of the MEWP
- Manual storage box
- Control functions
- 3.3-1 Main power disconnect switch
- 3.3-2 Base control console
- 3.3-3 Platform control console
- Features and devices
- 3.4-1 Lowered travel position and elevated travel position
- 3.4-2 Drive speed
- 3.4-3 Tilt switch
- 3.4-4 Brake release system
- 3.4-5 Emergency-lowering system
- 3.4-6 Fall-protection anchorage
- 3.4-7 Anti-static strip
- 3.4-8 Platform load-sensing system
- 3.4-9 Pothole protection device
- 3.4-10 Maintenance support
- General components
- 3.5-1 Battery charger
- 3.5-2 Folding-guardrail system
- 3.5-3 Extension platform
- 3.5-4 Display panel
- Optional equipment
- 3.6-1 Dual Flashing Lights
- 3.6-2 AC power outlet on the platform
- 3.6-3 Secondary Guarding Lift Enable (SGLE) push-button
- 3.6-4 White Noise Alarm
- 3.6-5 Elevate™ telematics access control unit
- 3.6-6 ECOTray Leak Containment System
Section 4 – Inspections Before Operation13 topics
- Operator’s responsibility
- Visual and daily maintenance inspections
- 4.2-2 Pothole protection limit switches
- 4.2-3 Electrical
- 4.2-4 Hydraulic
- 4.2-5 Wheel/tire assembly
- 4.2-7 Battery tray
- 4.2-9 Hydraulic and electric tray
- 4.2-10 Platform assembly
- 4.2-11 Lift mechanism
- Function tests
- 4.3-1 MEWP controls
- Operator’s checklist
Section 5 – Operation12 topics
- Energize the base control console
- Raise or lower the platform with the base control console
- Energize the platform control console
- Raise or lower the platform with the platform control console
- Raise and lower with the SGLE platform control console (optional equipment)
- Drive forward or rearward
- Steer
- Select the low-speed or high-speed mode
- Extend/retract the extension platform
- 5.9-1 Extend/retract the extension platform manually
- 5.9-2 Extend/retract the powered extension platform (if equipped, SJ3220 E)
- MEWP shutdown
Section 6 – Procedures18 topics
- Use the emergency-lowering function
- Release the brakes manually
- Winch and tow the MEWP
- Use the platform control console from the ground
- 6.4-1 Disconnect and remove the platform control console
- 6.4-2 Operate the MEWP from the ground
- Move the MEWP for transport
- 6.5-1 Hoist the MEWP
- 6.5-2 Drive and tie down the MEWP
- Charge the Battery
- Use the Maintenance Support
- 6.7-1 Deploy the maintenance support
- 6.7-2 Store the maintenance support
- Guardrail lock-pin locations
- Fold the guardrails
- 6.9-2 Fold the RapidFold guardrail system - SJ3219 E
- 6.9-3 Fold the guardrails - SJ4740 E
- Move the MEWP through a doorway
Section 7 – Specifications6 topics
- Standard and optional equipment
- Owner’s annual inspection record
- Specifications
- Environment
- Maximum platform capacities
- Floor loading pressure
Section 8 – Labels13 topics
- Base control console
- Platform control console
- Dual height control console label (SJ3226 E, SJ3232 E and SJ4740 E, if equipped)
- Power deck control console label (SJ3220 E), if equipped
- Rear
- Left side
- Platform
- Front
- Right side
- Battery tray
- Hydraulic tray
- Display panel
- RapidFold guardrail labels (SJ3219 E)
Inside this manual
Real pages from this operation manual (129 pages). Open the sample pages (PDF, 483 KB)
- Controls and operation, page 51: Section 5 – Operation
- Maintenance, page 64: Use the Maintenance Support
- Specifications, page 98: Maximum platform capacities
- Color page, page 16: SJ3215 E, SJ3219 E, SJ3220 E, SJ3226 E, SJ3232 E, SJ4726 E, SJ4732 E, SJ4740 E
- Color page, page 100: SJ3215 E, SJ3219 E, SJ3220 E, SJ3226 E, SJ3232 E, SJ4726 E, SJ4732 E, SJ4740 E
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 129 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).