Skyjack SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740 Electric Scissor Lift Operation Manual
125 pages · Publication 216380AJA
Added to your cart. View cart
- Models
- SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740
- Serial coverage
- SJ3215: A100000001 - A100039999
- SJ3219: A100000001 - A100039999
- SJ3220: A101000001 - A101018999
- SJ3226: A101000001 - A101018999
- SJ4726: A102000001 - A102013999
- SJ4732: A102000001 - A102013999
- SJ4740: A103000001 - A103006999
- Manual type
- Operation Manual
- Pages
- 125
- Publication
- 216380AJA
- Condition
- Brand new
What's inside
From the manual's own table of contents: 9 sections, 146 entries. See sample pages (PDF, 547 KB)
Section 1 – About this Mobile Elevating Work Platform (MEWP)15 topics
- Read and Heed
- 1.1-1 Mobile Elevating Work Platform (MEWP) definition
- 1.1-2 Purpose of equipment
- 1.1-3 Use of equipment
- 1.1-4 Operation manual
- 1.1-5 Operator
- 1.1-6 Service policy and warranty
- 1.1-7 Ownership of Machine
- 1.1-8 Optional Accessories
- 1.1-9 Scope of this Manual
- Primary assemblies
- Serial number nameplate
- Maintenance responsibility
- 1.4-1 Operator
- 1.4-2 Maintenance and inspection schedule
Section 2 – General Safety Precautions5 topics
- Electrocution hazards
- 2.1-1 Minimum distance from electrical conductors
- Safety instructions
- Fall-protection
- Worksite inspection
Section 3 – Familiarization30 topics
- Overview of the MEWP
- Manual storage box
- Control functions
- 3.3-1 Main power disconnect switch
- 3.3-2 Base control console
- 3.3-3 Platform control console
- Features and Devices
- 3.4-1 Lowered travel position and elevated travel position
- 3.4-2 Drive speed
- 3.4-3 Tilt switch
- 3.4-4 Brake release system
- 3.4-5 Freewheeling valve
- 3.4-6 Emergency-lowering system
- 3.4-7 Fall-protection anchorage
- 3.4-8 Platform load-sensing system
- 3.4-9 Pothole protection
- 3.4-10 Maintenance support(s)
- General components
- 3.5-1 AC power socket on the platform
- 3.5-2 Battery charger
- 3.5-3 Folding-guardrail system
- 3.5-4 Extension platform
- 3.5-5 Motion alarm
- 3.5-6 Skycoded™ display panel
- 3.5-7 Dual height control console (SJ3226 and SJ4740)
- Optional equipment
- 3.6-1 Power deck control console (SJ3220 and SJ4726)
- 3.6-3 Secondary Guarding Lift Enable (SGLE) push-button
- 3.6-4 Elevate™ telematics - access control unit
- 3.6-5 ECOTray Leak Containment System
Section 4 – Inspections Before Operation35 topics
- Operator’s Responsibility
- Visual and daily maintenance inspections
- 4.2-2 Pothole protection limit switches
- 4.2-3 Electrical
- 4.2-4 Hydraulic
- 4.2-5 Wheel/tire assembly
- 4.2-6 Entrance side
- 4.2-7 Battery tray side
- 4.2-8 Extension side
- 4.2-9 Hydraulic and electric tray side
- 4.2-10 Platform assembly
- 4.2-11 Lift mechanism
- Function Tests
- 4.3-1 Do a test of the main power disconnect switch
- 4.3-2 Do a test of the control module and load sensing module self-check
- 4.3-3 Do a test of the emergency-stop button on the base
- 4.3-4 Do a test of the off/platform/base key switch
- 4.3-5 Do a test of the lower/neutral/raise switch
- 4.3-6 Do a test of the emergency-lowering function
- 4.3-7 Do a test of the freewheeling function
- 4.3-8 Do a test of the emergency-stop button on the platform
- 4.3-9 Do a test of the function-enable switch
- 4.3-10 Do a test of the steer function
- 4.3-11 Do a test of the drive function
- 4.3-12 Do a test of the anti-tiedown function
- 4.3-13 Do a test of the brakes
- 4.3-14 Do a test of the platform raise and lower functions
- 4.3-15 Do a test of the horn
- 4.3-16 Do a test of the pothole protection device
- 4.3-17 Do a test of the elevated travel speed
- 4.3-18 Do a test of the dual height control console (SJ3226 and SJ4740)
- 4.3-19 Do a test of the power deck control console (optional equipment for SJ3220 and SJ4726)
- 4.3-20 Do a test of the SGLE switch (optional equipment)
- 4.3-21 Do a test of the flashing light (optional equipment)
- Operator’s Checklist
Section 5 – Operation13 topics
- Energize the base control console
- Raise or lower the platform with the base control console
- Energize the platform control console
- Raise or lower the platform with the platform control console
- Drive forward or rearward
- Steer
- Select the level-drive or inclined-drive mode
- Extend/retract the extension platform
- 5.8-1 Extend/retract the extension platform manually
- 5.8-2 Extend/retract the extension platform with the power deck (optional equipment for SJ3220 and SJ4726)
- Electrical inverter (optional equipment)
- Raise and lower with the SGLE platform control console (optional equipment)
- MEWP shutdown
Section 6 – Procedures21 topics
- Use the emergency-lowering function
- Open the freewheeling valve
- Release the brakes manually
- Winch and tow the MEWP
- Use the platform control console from the ground
- 6.5-1 Disconnect and remove the platform control console
- 6.5-2 Operate the MEWP from the ground
- Move the MEWP for transport
- 6.6-1 Hoist the MEWP
- 6.6-2 Drive and tie-down the MEWP
- Charge the Battery
- Use the Maintenance Support(s)
- 6.8-1 Deploy the maintenance support(s)
- 6.8-2 Store the maintenance support(s)
- Guardrail lock-pin locations
- Fold the guardrails
- 6.10-2 Fold the guardrail system down (SJ4740)
- 6.10-3 Fold the Rapidfold guardrail system down (SJ3219)
- 6.10-5 Unfold the guardrails (SJ4740)
- 6.10-6 Unfold the Rapidfold guardrails (SJ3219)
- Move the MEWP through a doorway
Section 7 – Specifications6 topics
- Standard and optional equipment
- Owner’s Annual Inspection Record
- Specifications
- Environment
- Maximum platform capacities (evenly distributed)
- Floor loading pressure
Section 8 – Labels12 topics
- Base control console labels
- Platform control console labels
- Dual height control console label (SJ3226 and SJ4740)
- Power deck control console labels (SJ3220 and SJ4726)
- Labels
- 8.5-3 Platform
- 8.5-5 Scissor assembly - rear
- 8.5-6 Right side
- 8.5-7 Battery tray
- 8.5-8 Hydraulic tray
- 8.5-9 Skycoded™ display panel
- 8.5-11 Rapidfold guardrail labels (SJ3219)
Inside this manual
Real pages from this operation manual (125 pages). Open the sample pages (PDF, 545 KB)
- Controls and operation, page 55: Section 5 – Operation
- Maintenance, page 68: Use the Maintenance Support(s)
- Specifications, page 92: Maximum platform capacities (evenly distributed)
- Color page, page 16: SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740
- Color page, page 9: SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 125 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).