Skyjack SJ519 TH Telehandler Operating Manual
99 pages · Publication 216939AHA
Added to your cart. View cart
- Models
- SJ519 TH
- Serial coverage
- SJ519 TH: 87500000 - 875999999 (as printed)
- Manual type
- Operating Manual
- Pages
- 99
- Publication
- 216939AHA
- Condition
- Brand new
What's inside
From the manual's own table of contents: 9 sections, 137 entries. See sample pages (PDF, 478 KB)
Section 1 – About Your Telehandler16 topics
- Read and Heed
- 1.1-1 Telehandler Definition
- 1.1-2 Purpose of Equipment
- 1.1-3 Use of Equipment
- 1.1-5 Operator
- 1.1-6 Service Policy and Warranty
- 1.1-7 Ownership of Machine
- 1.1-8 Optional Accessories
- 1.1-9 Scope of this Manual
- Symbols & Nomenclature
- Forklift Hand Signals
- Major Assemblies
- Serial Number Nameplate
- Operator’s Responsibility for Maintenance
- 1.6-1 Maintenance and Inspection Schedule
- 1.6-2 Owner’s Inspections
Section 2 – Operator Safety4 topics
- Electrocution Hazard
- Safety Precautions
- Cab Access
- Jobsite Inspection
Section 3 – Familiarization29 topics
- Component Identification
- Manual Storage Box
- Control Functions
- 3.3-1 Operator’s Cab Controls
- 3.3-2 Multi-functional Joystick
- 3.3-3 Operator’s Cab Dash Controls
- Safety Features and Devices
- 3.4-1 Reverse Alarm
- 3.4-2 Parking Brake
- 3.4-3 Operator’s Cab
- 3.4-4 Operator’s Seat
- 3.4-5 Frame Level
- Optional Equipment
- 3.5-1 Positive Air Shutoff Switch (If Equipped)
- 3.5-2 Flashing Beacon (If Equipped)
- 3.5-3 Road Lights, Boom Lights & Work Lights (If Equipped)
- 3.5-4 Fire Extinguisher (If Equipped)
- 3.5-5 Back-up Sensor with Display Buzzer (If Equipped)
- 3.5-6 Back-up Sensor/Camera with Monitor (If Equipped)
- 3.5-7 Back-up Camera and Sensor System with Monitor (If Equipped)
- 3.5-8 Multi-view Camera and Sensor System with Monitor (If Equipped)
- 3.5-9 Tilt Steering Option (If Equipped)
- Optional Attachments
- 3.6-1 Side Tilt Carriage
- 3.6-2 Side Shift Carriage
- 3.6-3 Block Forks
- 3.6-4 Skid Steer Adapter
- 3.6-5 Truss Boom
- 3.6-6 Loader Bucket
Section 4 – Pre-operation24 topics
- Operator’s Responsibility
- Visual & Daily Maintenance Inspections
- 4.2-2 Electrical
- 4.2-3 Hydraulic
- 4.2-4 Cylinders
- 4.2-7 Engine Compartment
- 4.2-9 Lifting Attachment
- 4.2-10 Grease Points
- 4.2-11 Operator’s Cab
- 4.2-12 Operator’s Cab Controls
- Function Tests
- 4.3-1 Test Starter Operation
- 4.3-3 Test Lights (If Equipped)
- 4.3-4 Test Boom Functions
- 4.3-5 Test Attachment Functions
- 4.3-6 Test Accelerator Pedal
- 4.3-7 Test Reverse Alarm, Driving & Service Brake
- 4.3-8 Test Parking Brake
- 4.3-9 Test Steering
- 4.3-10 Test Back-up Sensor with Display Buzzer (If Equipped)
- 4.3-11 Test Back-up Sensor/Camera with Monitor (If Equipped)
- 4.3-12 Test the Back-up Camera and Sensor System with Monitor (If Equipped)
- 4.3-13 Test the Multi-view Camera and Sensor System with Monitor (If Equipped)
- Operator’s Checklist
Section 5 – Operation42 topics
- Starting the Engine
- Driving the Telehandler
- 5.2-1 Driving on Level Terrain
- 5.2-2 Driving on Slopes
- Steering the Telehandler
- 5.3-1 Four-wheel Steering
- 5.3-2 Front Steering (Two-Wheel)
- 5.3-3 Crab Steering
- 5.3-4 Adjusting the Tilt Steering Wheel (If Equipped)
- Operating the Boom
- 5.4-1 Raising or Lowering Boom
- 5.4-2 Extending or Retracting Boom
- Tilting the Attachment
- Handling Loads
- Handling Loads at Ground Level
- 5.7-1 Picking up a Load
- 5.7-2 Transporting a Load
- 5.7-3 Placing a Load
- Handling Loads at Variable Heights
- 5.8-1 Picking up a Load
- 5.8-2 Placing a Load
- Parking and Shutting Down the Telehandler
- DEUTZ Engine Data Display Module
- 5.10-1 Function Buttons
- 5.10-2 Contrast & Illumination Settings
- 5.10-3 Engine Main Display
- 5.10-4 Quad Display
- 5.10-5 Graphic Display
- 5.10-6 Error Messages
- 5.10-7 Display Configuration
- Use of the Capacity Charts
- 5.11-1 Maximum Load Capacity
- 5.11-2 Examples on Reading the Capacity Chart
- Attachment Installation and Adjustment
- 5.12-1 Installing Attachments Using the Quick Attach Feature
- 5.12-2 Removing Attachments Using the Quick Attach Feature
- 5.12-3 Installing Attachments Using the Hydraulic Quick Attach Feature (If Equipped)
- 5.12-4 Removing Attachments Using the Hydraulic Quick Attach Feature (If Equipped)
- 5.12-5 Adjusting Forks
- 5.12-6 Changing Forks
- Slinging Loads
- Third-Party Attachments
Section 6 – Procedures7 topics
- Refueling Procedure
- 6.1-1 Diesel Fuel
- Lifting SJ519 TH
- Loading, Tie-downs and Transporting
- Towing the Telehandler
- Using the Telehandler as a Tow Vehicle
- 6.5-1 Rear Hitch
Section 7 – Specifications5 topics
- Standard and Optional Equipment
- Specifications and Features
- Tire/Wheel Specifications
- Floor Loading Pressure
- Recommended Fluids/Lubrications
Section 8 – Labels1 topic
- Model SJ519 TH
Inside this manual
Real pages from this operating manual (99 pages). Open the sample pages (PDF, 476 KB)
- Maintenance, page 14: Operator’s Responsibility for Maintenance
- Controls and operation, page 48: Function Tests
- Specifications, page 63: Section 5 – Operation
- Color page, page 19: Section 2 – Operator Safety
- Color page, page 64: Use of the Capacity Charts
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the SJ519 TH are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 99 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).