MidWestTechService, Parts and Operator's Manuals, in stock and ready to ship!
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3+

Snorkel SR9244, SR1054 - Deutz Stage 4, Open Cab Telehandler Operator's and Maintenance Manual

193 pages · Publication 159-0079-000

$69.61
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Models
SR9244, SR1054 - Deutz Stage 4, Open Cab
Serial coverage
Manufactured January 2021 and after
Manual type
Operator's and Maintenance Manual
Pages
193
Publication
159-0079-000
Condition
Brand new
Snorkel SR9244, SR1054 - Deutz Stage 4, Open Cab Telehandler Operator's and Maintenance Manual, publication 159-0079-000

What's inside

From the manual's own table of contents: 10 sections, 175 entries. See sample pages (PDF, 514 KB)

GENERAL INFORMATION31 topics
  • PRELIMINARY INFORMATION
    • DOCUMENT IDENTIFICATION
    • SYMBOLS USED IN THE MANUAL
    • MANUAL OWNERSHIP
    • VALIDITY
    • THE IMPORTANCE OF THE MANUAL
    • RECIPIENTS OF THE MANUAL
    • SAFE-KEEPING OF THE MANUAL
    • TERMINOLOGY USED
  • THE MANUFACTURER
  • THE DEALER
  • OPERATOR TRAINING
    • DRIVING ABILITY
  • MACHINE IDENTIFICATION
    • TECHNICAL NAME
    • IDENTIFICATION PLATE
  • NOISE
  • VIBRATION
  • TECHNICAL SPECIFICATIONS
    • MACHINE MASS
    • MACHINE SIZE
    • BRAKING SYSTEMS
    • TRANSMISSION
    • STEERING
    • HYDRAULIC SERVICES SYSTEM
    • DIFFERENTIAL AXLES
    • DIESEL ENGINE
    • COOLING SYSTEM
    • TIRES
    • DRIVER CABIN
  • REGULATORY REFERENCES
SAFETY38 topics
  • INTENDED USE OF THE MACHINE
  • UNINTENDED USE
  • LIMITS OF USE
  • GENERAL REGULATIONS FOR USE
  • WORKING ON SITE
  • MANEUVERING ON UNEVEN GROUND
  • MANEUVERING ON A TRANSVERSAL SLOPE
  • MANEUVERING ON A LONGITUDINAL SLOPE
  • IN CASE OF TIPPING OVER
  • PREPARING TO DRIVE
    • ACCESS TO THE DRIVER CABIN
    • ADJUSTING THE DRIVER'S SEAT
    • TILTING THE SEAT
    • SAFETY BELTS
    • ADJUSTING THE STEERING WHEEL
  • SAFETY DECALS
  • LOAD CHART
    • STABILITY CONDITIONS
  • ANTI-TIP SYSTEM
  • TRANSPORTING THE MACHINE
    • LOADING AND UNLOADING WITH RAMPS
    • LOADING AND UNLOADING WITH A CRANE
  • GENERAL SAFETY WARNINGS
  • CHECKING ENGINE START UP
  • MOVEMENT IN REVERSE DRIVE
  • REFUELLING THE MACHINE
  • FUEL QUALITY (DIESEL)
  • STORING THE MACHINE
  • MACHINE DEMOLITION
  • USING THE MACHINE
    • DRIVING ABILITY
    • RESPONSIBLE USE
    • RESPONSIBLE DRIVING
  • ROAD CIRCULATION
    • BEFORE MOVING
    • FORWARD DRIVE
    • REVERSE DRIVE
    • PARKING
CONTROLS AND GENERAL REGULATIONS14 topics
  • DESCRIPTION OF THE CONTROLS
    • CONTROL LEVERS ON THE STEERING COLUMN
  • DESCRIPTION OF THE RIGHT FRONT DASHBOARD
    • ON BOARD COMPUTER
    • RIGHT FRONT DASHBOARD
    • FIRST RIGHT SIDE DASHBOARD
  • SECOND RIGHT SIDE DASHBOARD
    • TOP RIGHT SIDE DASHBOARD
  • PEDALS
  • JOYSTICK
  • FRAME LEVELING CONTROL
  • FLOATING BOOM FUNCTION (OPTIONAL)
  • SUSPENSION BOOM FUNCTION (OPTIONAL)
  • REVERSING FAN FUNCTION (OPTIONAL)
OPERATING WITH THE MACHINE26 topics
  • START UP
  • FORWARD DRIVE OR REVERSE DRIVE
  • STEERING
  • SELECTING THE DRIVING MODE
    • DRIVE mode
    • ECO mode
    • HANDLING mode
    • CREEPER mode (Optional)
  • LEVELING THE MACHINE
    • MACHINE LEVELING ON WHEELS
  • LOCKING REAR AXLE OSCILLATION
  • OUTRIGGERS
  • ACCESSORY COUPLING AND RELEASE
  • STACKING
    • HOW TO DRAW A LOAD
    • HOW TO PICK A LOAD FROM ABOVE
  • LIMITS OF MACHINE USE
    • TRANSPORTING THE LOAD
    • TRANSPORTING THE LOAD ON A SLOPE
  • POST-TREATMENT OF THE EXHAUST GAS
  • WHAT TO DO AND NOT DO
  • HOW TO VERIFY THAT THE ANTI-TIP DEVICE WORKS CORRECTLY
  • TOWING THE MACHINE
    • MECHANICALLY RELEASING THE PARKING BRAKE ON THE CARRARO AXLE
    • TOWING FOR SHORT DISTANCES
    • TOWING FOR LONG DISTANCES
MAINTENANCE53 topics
  • GENERAL INFORMATION
  • THERMAL RISK
    • JETS OF HOT FLUIDS
    • FLUIDS AND HOT SURFACES
  • PRESSURISED LIQUIDS
  • EXHAUST GAS
  • HANDLE THE BATTERY WITH CARE
  • START-UP USING AN EXTERNAL BATTERY
  • IN CASE OF FIRE
  • MAINTENANCE WITH THE ENGINE OFF
  • MAINTENANCE WITH THE ENGINE ON
  • RESPECT THE ENVIRONMENT
  • MAINTENANCE SCHEDULE
  • DEUTZ ENGINE
    • CHECK THE ENGINE LUBRICANT OIL LEVEL
    • CHECK THE COOLING LIQUID LEVEL
    • DRAIN THE WATER FROM THE FUEL PRE-FILTER
    • DRAINING WATER FROM THE FUEL TANK / EMPTYING THE FUEL TANK
    • CHECK THE AUXILIARY PARTS BELT CONDITIONS AND TENSION
    • CHECKING THE INTEGRITY OF THE EXHAUST PIPE/S
    • CHANGE THE ENGINE OIL
    • REPLACING THE ENGINE OIL FILTER/S
    • REPLACING THE FUEL FILTER/S
    • FUEL FILTER BLEEDING PROCEDURE
  • HEAT EXCHANGER
  • CHECKING THE HYDRAULIC OIL LEVEL
  • CHANGING THE HYDRAULIC OIL
  • VISUAL INSPECTION FOR OIL LEAKS IN THE HYDRAULIC SYSTEM
  • REPLACING THE RETURN HYDRAULIC OIL FILTER CARTRIDGE
  • CLEANING OR REPLACING THE OIL TANK VENT CARTRIDGE
  • REPLACING THE HYDROSTATIC PUMP OIL CARTRIDGE/FILTER
  • CLEANING AND REPLACING THE ENGINE AIR FILTER CARTRIDGE
  • AdBlue® (DEF) REFUELLING
  • COOLING SYSTEM FILLING
  • AdBlue® (DEF) FEED PUMP FILTERING CARTRIDGE REPLACEMENT
  • GREASING – LUBRICATION
  • LUBRICANT/LIQUID CHARACTERISTICS
    • ENGINE OIL
    • HYDRAULIC SYSTEM OIL
    • AXLE OIL
    • TB172 GEAR BOX OIL
    • GREASE
    • COOLANT LIQUID
  • AXLES
    • CHANGING THE AXLE OIL
    • CHANGING THE PLANETARY REDUCTION GEAR OIL
    • CHANGING THE GEARBOX OIL
  • TORQUE OF THE SCREWS AND GREASING THE CARDAN SHAFT CROSS JOINTS
  • CHECKING THE TIRE PRESSURE AND TORQUE OF THE NUTS
  • INSPECTING, CHARGING AND REPLACING THE BATTERY
  • FUSE HOLDER CARD
  • LIST OF TRANSMISSION ERRORS
  • ENGINE ERRORS
ELECTRICAL SYSTEM DIAGRAM1 topic
  • REQUEST FOR THE ELECTRICAL WIRING DIAGRAM
HYDRAULIC SYSTEM DIAGRAM1 topic
  • REQUEST FOR HYDRAULIC SYSTEM DIAGRAM
SCHEDULED MAINTENANCE COUPONS1 topic
  • IMPLEMENTED SCHEDULED MAINTENANCE COUPONS
MACHINE RECEIPT CARD
LOAD CHARTS

Inside this manual

Real pages from this operator's and maintenance manual (193 pages). Open the sample pages (PDF, 513 KB)

Sample pages from the Snorkel SR9244, SR1054 - Deutz Stage 4, Open Cab Telehandler Operator's and Maintenance Manual: Controls and operation, Maintenance, Specifications, Color page, Color page
  • Controls and operation, page 50: 3.1.1.2 LEVER ON THE RIGHT OF THE STEERING WHEEL
  • Maintenance, page 114: FREQUENCY
  • Specifications, page 142: 5.28 CHECKING THE TIRE PRESSURE AND TORQUE OF THE
  • Color page, page 95: Snorkel International, LLC
  • Color page, page 33: Snorkel International, LLC

Other manuals for this machine

Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the SR9244 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.

This manual: Operator's and Maintenance Manual 159-0079-000$69.61
Other manuals for the SR9244

Parts manuals

Details

This is an operator's manual

Here's how it compares to the other manual types.

Service manual

Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.

This manual

Operator's manual

Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.

Parts manual

Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.

What it's used for

Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.

Service shops and owner/operators who repair their own equipment

Identifying correct parts and seeing how assemblies come apart and go back together

Keeping equipment running with less downtime

Factory manual, 193 pages

Quantity one is the manual described above.

Fast free USA shipping

Ships in 1 business day.

60-day returns

Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy

Other editions and similar models

Snorkel SR9244, SR1054Operator's and Maintenance Manual · 159-0037-000 · $69.71Snorkel SR9244, SR1054 - Deutz Stage 4Operator's and Maintenance Manual · 159-0051-000 · $69.77Snorkel SR9244, SR1054 - Deutz Stage 5Operator's and Maintenance Manual · 159-0051-001 · $69.59Snorkel SR9244, SR1054 - Deutz Stage 5, Open CabOperator's and Maintenance Manual · 159-0079-001 · $69.69Snorkel SR1054Repair Parts Manual · 159-0025-000 · $99.73

Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).