Snorkel SR9244, SR1054 Telehandler Operator's and Maintenance Manual
197 pages · Publication 159-0037-000
Added to your cart. View cart
What's inside
From the manual's own table of contents: 1 sections, 121 entries. See sample pages (PDF, 527 KB)
General120 topics
- GENERAL INFORMATION
- PRELIMINARY INFORMATION
- THE MANUFACTURER
- THE DEALER
- CE CERTIFICATION
- OPERATOR TRAINING
- MACHINE IDENTIFICATION
- NOISE
- VIBRATION
- TECHNICAL SPECIFICATIONS
- REGULATORY REFERENCES
- SAFETY
- INTENDED USE OF THE MACHINE
- UNINTENDED USE
- LIMITS OF USE
- GENERAL REGULATIONS FOR USE
- WORKING ON SITE
- MANEUVERING ON UNEVEN GROUND
- MANEUVERING ON A TRANSVERSAL SLOPE
- MANEUVERING ON A LONGITUDINAL SLOPE
- IN CASE OF TIPPING OVER
- PREPARING TO DRIVE
- ACCESS TO THE DRIVER CABIN
- ADJUSTING THE DRIVER'S SEAT
- TILTING THE SEAT
- SAFETY BELTS
- ADJUSTING THE STEERING WHEEL
- OPENING THE BACK WINDOW
- HEATING AND AIR CONDITIONING
- SAFETY DECALS
- LOAD CHART
- STABILITY CONDITIONS
- ANTI-TIP SYSTEM
- TRANSPORTING THE MACHINE
- LOADING AND UNLOADING WITH RAMPS
- LOADING AND UNLOADING WITH A CRANE
- GENERAL SAFETY WARNINGS
- CHECKING ENGINE START UP
- MOVEMENT IN REVERSE DRIVE
- REFUELLING THE MACHINE
- FUEL QUALITY (DIESEL)
- STORING THE MACHINE
- MACHINE DEMOLITION
- USING THE MACHINE
- DRIVING ABILITY
- RESPONSIBLE USE
- RESPONSIBLE DRIVING
- ROAD CIRCULATION
- BEFORE MOVING
- FORWARD DRIVE
- REVERSE DRIVE
- PARKING
- CONTROLS AND GENERAL REGULATIONS
- DESCRIPTION OF THE CONTROLS
- DESCRIPTION OF THE RIGHT FRONT DASHBOARD
- SECOND RIGHT SIDE DASHBOARD
- TOP RIGHT SIDE DASHBOARD
- PEDALS
- JOYSTICK
- JOYSTICK (OPTIONAL)
- FLOATING BOOM FUNCTION (OPTIONAL)
- BOOM SUSPENSION FUNCTION (OPTIONAL)
- REVERSING FAN FUNCTION (OPTIONAL)
- OPERATING WITH THE MACHINE
- START UP
- FORWARD DRIVE OR REVERSE DRIVE
- STEERING
- SELECTING THE DRIVING MODE
- LEVELLING THE MACHINE
- LOCKING REAR AXLE OSCILLATION (OPTIONAL)
- OUTRIGGERS
- ACCESSORY COUPLING AND RELEASE
- STACKING
- LIMITS OF MACHINE USE
- POST-TREATMENT OF THE EXHAUST GAS
- WHAT TO DO AND NOT DO
- HOW TO VERIFY THAT THE ANTI-TIP DEVICE WORKS CORRECTLY
- TOWING THE MACHINE
- MAINTENANCE
- GENERAL INFORMATION
- THERMAL RISK
- PRESSURISED LIQUIDS
- EXHAUST GAS
- HANDLE THE BATTERY WITH CARE
- START-UP USING AN EXTERNAL BATTERY
- IN CASE OF FIRE
- MAINTENANCE WITH THE ENGINE OFF
- MAINTENANCE WITH THE ENGINE ON
- RESPECT THE ENVIRONMENT
- MAINTENANCE SCHEDULE
- DEUTZ ENGINE
- HEAT EXCHANGER
- CHECKING THE HYDRAULIC OIL LEVEL
- CHANGING THE HYDRAULIC OIL
- VISUAL INSPECTION FOR OIL LEAKS IN THE HYDRAULIC SYSTEM
- REPLACING THE RETURN HYDRAULIC OIL FILTER CARTRIDGE
- CLEANING OR REPLACING THE OIL TANK VENT CARTRIDGE
- REPLACING THE HYDROSTATIC PUMP OIL CARTRIDGE/FILTER
- CLEANING AND REPLACING THE ENGINE AIR FILTER CARTRIDGE
- REPLACING THE CABIN AIR FILTER
- AdBlue® (DEF) REFUELLING
- COOLING SYSTEM FILLING
- AdBlue® (DEF) FEED PUMP FILTERING CARTRIDGE REPLACEMENT
- GREASING – LUBRICATION
- LUBRICANT/LIQUID CHARACTERISTICS
- AXLES
- TORQUE OF THE SCREWS AND GREASING THE CARDAN SHAFT CROSS
- RECHARGING THE AIR CONDITIONING
- CHECKING THE TIRE PRESSURE AND TORQUE OF THE NUTS
- INSPECTING, CHARGING AND REPLACING THE BATTERY
- FUSE HOLDER CARD
- LIST OF TRANSMISSION ERRORS
- ENGINE ERRORS
- ELECTRICAL SYSTEM DIAGRAM
- REQUEST FOR THE ELECTRICAL WIRING DIAGRAM
- HYDRAULIC SYSTEM DIAGRAM
- REQUEST FOR HYDRAULIC SYSTEM DIAGRAM
- SCHEDULED MAINTENANCE COUPONS
- IMPLEMENTED SCHEDULED MAINTENANCE COUPONS
- MACHINE RECEIPT CARD
Inside this manual
Real pages from this operator's and maintenance manual (197 pages). Open the sample pages (PDF, 526 KB)
- Controls and operation, page 43: CHECKING ENGINE START UP
- Maintenance, page 121: MAINTENANCE SCHEDULE
- Specifications, page 154: Maintenance
- Color page, page 99: Model: Snorkel SR9244 SR1054
- Color page, page 33: Model: Snorkel SR9244 SR1054
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 197 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).