Bobcat S100 Skid-Steer Loader Operation & Maintenance Manual
128 pages · Publication 6904925
Added to your cart. View cart
- Models
- S100
- Serial coverage
- A2G711001 & Above
- Manual type
- Operation & Maintenance Manual
- Pages
- 128
- Publication
- 6904925
- Condition
- Brand new
What's inside
From the manual's own table of contents: 10 sections, 193 entries. See sample pages (PDF, 467 KB)
FOREWORD10 topics
- BOBCAT COMPANY IS ISO 9001:2000 CERTIFIED
- REGULAR MAINTENANCE ITEMS
- SERIAL NUMBER LOCATIONS
- Loader Serial Number
- Engine Serial Number
- LOADER IDENTIFICATION
- FEATURES, ACCESSORIES AND ATTACHMENTS
- Buckets Available
- Attachments
- Special Applications Kit
SAFETY & TRAINING RESOURCES7 topics
- SAFETY INSTRUCTIONS
- Before Operation
- Safe Operation Is The Operator’s Responsibility
- Safe Operation Needs A Qualified Operator
- Fire Prevention
- MACHINE SIGNS (DECALS)
- PUBLICATIONS AND TRAINING RESOURCES
OPERATING INSTRUCTIONS68 topics
- INSTRUMENT PANEL IDENTIFICATION
- Left Panel
- Display Screen Functions
- Right Instrument Panel (Key Switch)
- Cab Light
- Option And Field Accessory Panels
- HORN (OPTION)
- Operation
- SEAT BAR RESTRAINT SYSTEM
- Operation
- BOBCAT INTERLOCK CONTROL SYSTEM (BICS)
- Operation
- LIFT ARM BYPASS CONTROL
- Operation
- TRACTION LOCK OVERRIDE
- Operation
- BACK-UP ALARM SYSTEM
- Operation
- ENGINE SPEED CONTROL
- Operation
- PARKING BRAKE
- Operation
- DRIVING AND STEERING THE LOADER
- Operation
- Stopping The Loader
- HYDRAULIC CONTROLS
- Description
- Bucket Position Valve Operation (If Equipped)
- Auxiliary Control Lockout
- Auxiliary Hydraulics
- Relieving Hydraulic Pressure (Loader and Attachment)
- Quick Couplers
- DAILY INSPECTION
- Daily Inspection And Maintenance
- PRE-STARTING PROCEDURE
- Entering The Loader
- Operation & Maintenance Manual and Operator’s Handbook Locations
- Seat Adjustment
- Seat Belt Adjustment
- Seat Bar
- STARTING THE ENGINE
- Key Switch
- Warming The Hydraulic / Hydrostatic System
- Cold Temperature Starting
- MONITORING THE DISPLAY PANELS
- Left Panel
- Warning And Shutdown
- STOPPING THE ENGINE AND LEAVING THE LOADER
- Procedure
- Emergency Exit
- ATTACHMENTS
- Choosing The Correct Bucket
- Pallet Forks
- Installing And Removing The Attachment
- OPERATING PROCEDURE
- Inspecting The Work Area
- Operating With A Full Bucket
- Operating With An Empty Bucket
- Filling And Emptying The Bucket
- Leveling The Ground Using Float
- Digging And Filling A Hole
- TOWING THE LOADER
- Procedure
- LIFTING THE LOADER
- Single Point Lift
- TRANSPORTING THE LOADER ON A TRAILER
- Loading And Unloading
- Fastening
PREVENTIVE MAINTENANCE81 topics
- MAINTENANCE SAFETY
- SERVICE SCHEDULE
- Chart
- Inspecting The BICS Controller (Engine STOPPED - Key ON)
- Inspecting The Seat Bar Sensor (Engine RUNNING)
- Inspecting The Traction Lock (Engine RUNNING)
- Inspecting The Lift Arm Bypass Control
- Description
- Inspecting
- Maintaining
- SEAT BELT
- Inspection And Maintenance
- LIFT ARM SUPPORT DEVICE
- Installing
- Removing
- Description
- Inspecting
- Adjusting Switch Position
- OPERATOR CAB
- Description
- Raising
- Lowering
- Cab Door Sensor (If Equipped)
- REAR DOOR
- Opening And Closing
- Adjusting
- REAR GRILL
- Removing
- Installing
- CAB FILTERS
- Cleaning And Maintenance
- AIR CLEANER SERVICE
- Replacing Filter Elements
- FUEL SYSTEM
- Fuel Specifications
- Filling The Fuel Tank
- Fuel Filter
- Removing Air From The Fuel System
- ENGINE LUBRICATION SYSTEM
- Checking And Adding Engine Oil
- Engine Oil Chart
- Removing And Replacing Oil And Filter
- ENGINE COOLING SYSTEM
- Cleaning
- Checking Level
- Removing And Replacing Coolant
- ELECTRICAL SYSTEM
- Description
- Fuse And Relay Location / Identification
- Battery Maintenance
- Using A Booster Battery (Jump Starting)
- Removing And Installing Battery
- HYDRAULIC / HYDROSTATIC SYSTEM
- Checking And Adding Fluid
- Hydraulic / Hydrostatic Fluid Chart
- Removing And Replacing Hydraulic / Hydrostatic Filter
- Removing And Replacing Hydraulic Fluid and Case Drain Filters
- Removing And Replacing Charge Filter
- SPARK ARRESTOR MUFFLER
- Cleaning Procedure
- TIRE MAINTENANCE
- Wheel Nuts
- Rotating
- Mounting
- FINAL DRIVE TRANSMISSION (CHAINCASE)
- Checking And Adding Oil
- Removing And Replacing Oil
- ALTERNATOR BELT
- Belt Adjustment
- Belt Replacement
- DRIVE BELT
- Belt Replacement
- LUBRICATING THE LOADER
- Lubrication Locations
- PIVOT PINS
- Inspection And Maintenance
- BOB-TACH
- Inspection And Maintenance
- LOADER STORAGE AND RETURN TO SERVICE
- Storage
- Return To Service
SYSTEM SETUP & ANALYSIS5 topics
- Troubleshooting
- DIAGNOSTIC SERVICE CODES
- Viewing Service Codes
- Service Codes List
- Service Codes List (Cont’d)
MACHINE SIGN TRANSLATIONS2 topics
- SERVICE SCHEDULE (6734534)
- LIFT ARM SUPPORT DEVICE (6706558)
SPECIFICATIONS10 topics
- (S100) LOADER SPECIFICATIONS
- Machine Dimensions
- Performance
- Controls
- Engine
- Hydraulic System
- Electrical
- Drive System
- Capacities
- Tires
Inside this manual
Real pages from this operation & maintenance manual (128 pages). Open the sample pages (PDF, 466 KB)
- Controls and operation, page 33: HYDRAULIC CONTROLS
- Maintenance, page 75: FUEL SYSTEM (CONT’D)
- Specifications, page 122: (S100) LOADER SPECIFICATIONS (CONT’D)
- Color page, page 18: S100 Operation & Maintenance Manual
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the S100 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 128 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).