Bobcat Toolcat 5600 Utility Work Machine Operation & Maintenance Manual
140 pages · Publication 6904207
Added to your cart. View cart
- Models
- Toolcat 5600
- Serial coverage
- A00211001 & Above
- A00311001 & Above
- Manual type
- Operation & Maintenance Manual
- Pages
- 140
- Publication
- 6904207
- Condition
- Brand new
What's inside
From the manual's own table of contents: 10 sections, 261 entries. See sample pages (PDF, 476 KB)
FOREWORD12 topics
- BOBCAT COMANY IS IS0 9001:2000 CERTIFIED
- REGULAR MAINTENANCE ITEMS
- SERIAL NUMBER LOCATIONS
- Utility Work Machine Serial Number
- Engine Serial Number
- DELIVERY REPORT
- UTILITY WORK MACHINE IDENTIFICATION
- FEATURES, ACCESSORIES AND ATTACHMENTS
- Standard Items
- Options And Field Accessories
- Buckets Available
- Attachments
SAFETY TRAINING & RESOURCES17 topics
- SAFETY INSTRUCTIONS
- Before Operation
- Safe Operation Is The Operator’s Responsibility
- Safe Operation Needs A Qualified Operator
- Avoid Silica Dust
- FIRE PREVENTION
- Maintenance
- Operation
- Electrical
- Hydraulic System
- Fueling
- Starting
- Spark Arrestor Exhaust System
- Welding And Grinding
- Fire Extinguishers
- MACHINE SIGNS (DECALS)
- PUBLICATIONS AND TRAINING RESOURCES
OPERATING INSTRUCTIONS102 topics
- OPERATOR CONTROLS AND INSTRUMENT PANELS
- Overview
- Switch Panel
- Display Controller Panel
- Indicator Icons
- Floor Console
- Center Console
- TOOLCAT INTERLOCK CONTROL SYSTEM (Tics)
- TICS And Arm Rest Operation
- LIFT ARM BY-PASS CONTROL
- Operation
- ENGINE SPEED CONTROL
- Operation
- PARKING BRAKE
- Operation
- STEERING MODE SELECTION
- Operation
- TRAVEL DIRECTION CONTROL LEVER
- Operation
- Two-Speed Control
- DRIVE PEDAL
- Operation
- BRAKE PEDAL
- Operation
- STOPPING THE UTILITY WORK MACHINE
- Procedure
- WHEEL ALIGNMENT
- Procedure
- DIFFERENTIAL LOCK
- Engaging
- HYDRAULIC CONTROLS
- Description
- Lift Arm Operation
- Lift Arm Float Position
- Tilt Operation
- Front Auxiliary Hydraulics Operation
- Front Auxiliary Hydraulics Operation (CONTINUOUS FLOW)
- Quick Couplers
- Relieve Hydraulic Pressure (Utility Work Machine and Attachment)
- High Flow Hydraulics Operation (If Equipped)
- REAR AUXILIARY HYDRAULICS (If Equipped)
- Description
- Rear Auxiliary Hydraulics Operation
- Rear Auxiliary Hydraulics Operation (CONTINUOUS FLOW)
- Quick Couplers
- Relieve Hydraulic Pressure (Utility Work Machine and Attachment)
- POWER TAKE-OFF (PTO) (If Equipped)
- Description
- Safety Rules For PTO
- Connecting The Motor
- Connecting The Attachment
- Operation
- Disconnecting The Attachment
- REMOTE HYDRAULICS (If Equipped)
- Description
- Remote Hydraulics Operation
- Function Chart [Figure OI-43] and [Figure OI-44]
- Quick Couplers And Hoses
- DAILY INSPECTION
- Daily Inspection and Maintenance
- PRE-STARTING PROCEDURE
- Entering The Utility Work Machine
- Seat And Steering Wheel Adjustment
- Seat Belt Adjustment And Arm Rest
- STARTING THE ENGINE
- Key Switch
- Keyless
- Cold Temperature Starting
- Warming The Hydraulic / Hydrostatic System
- MONITORING THE DISPLAY PANEL
- Key Switch And Keyless
- Warning And Shutdown
- STOPPING THE ENGINE AND LEAVING THE UTILITY WORK MACHINE
- Procedure
- Emergency Exit
- MACHINE Load CAPACITIES
- Loader Rated Operating Capacity (ROC)
- Maximum Cargo Box Load
- Machine Rated Capacity
- Maximum Trailer Hitch Tongue Weight
- Total Rated Capacity
- ATTACHMENTS
- Choosing The Correct Bucket
- Pallet Fork
- Installing And Removing The Attachment
- OPERATING PROCEDURE
- Inspect The Work Area
- Operating With A Full Bucket & Empty Cargo Box
- Operating With An Empty Bucket & Loaded Cargo Box
- Filling And Emptying The Bucket
- Leveling The Ground Using Float
- Backfilling
- Work Mode Operation
- Opening And Closing The Tailgate
- Raising And Lowering The Cargo Box
- Hauling Loads In The Cargo Box
- Towing Equipment With The Utility Work Machine
- TOWING THE UTILITY WORK MACHINE
- Procedure
- TRANSPORTING THE UTILITY WORK MACHINE ON A TRAILER
- Loading And Unloading
- Fastening
PREVENTIVE MAINTENANCE91 topics
- MAINTENANCE SAFETY
- SERVICE SCHEDULE
- Chart
- Inspecting The TICS
- Maintaining The TICS
- Inspecting The Lift Arm By-Pass Control
- SEAT BELT
- Inspection and Maintenance
- NEUTRAL START SYSTEM
- Inspection And Maintenance
- LIFT ARM SUPPORT DEVICE
- Installing
- Removing
- CARGO BOX SUPPORT DEVICE
- Installing
- Removing
- Raising The Cargo Box When Engine Is Not Running
- PARKING BRAKE SYSTEM
- Inspection And Maintenance
- OPERATOR CAB
- Description
- HEATING AND AIR CONDITIONING
- Cleaning and Maintenance
- Filters
- Evaporator Coil
- Air Conditioning Lubrication
- Troubleshooting
- CAB AIR FILTER
- Cleaning And Maintenance
- Fresh Air Filter
- Recirculating Air Filter
- AIR CLEANER SERVICE
- Replacing Filter Elements
- SEATS
- Removal
- Installation
- FUEL SYSTEM
- Fuel Specifications
- Filling The Fuel Tank
- Fuel Filter
- Removing Air From The Fuel System
- Filling A Portable Fuel Container
- ENGINE LUBRICATION SYSTEM
- Checking And Adding Engine Oil
- Engine Oil Chart
- Removing And Replacing Oil And Filter
- ENGINE COOLING SYSTEM
- Checking
- Cleaning
- Removing And Replacing Coolant
- ELECTRICAL SYSTEM
- Description
- Fuse And Relay Location / Identification
- Battery And Battery Terminal Maintenance
- Using A Booster Battery (Jump Starting)
- Removing And Installing Battery
- HYDRAULIC / HYDROSTATIC SYSTEM
- Checking And Adding Fluid
- Hydraulic / Hydrostatic Fluid Chart
- Removing And Replacing Hydraulic/Hydrostatic And Case Drain Filters
- Removing And Replacing Hydraulic Fluid
- Breather Cap
- SPARK ARRESTOR MUFFLER
- Cleaning Procedure
- SUPPORTING THE MACHINE ON JACKSTANDS
- Procedure
- TIRE MAINTENANCE
- Wheel Nuts
- Rotating
- Mounting
- AXLE / DIFFERENTIAL (FRONT AND REAR)
- Checking And Adding Lubricant
- Removing And Replacing Lubricant
- ALTERNATOR BELT
- Belt Adjustment
- Belt Replacement
- AIR CONDITIONER BELT
- Belt Adjustment
- Belt Replacement
- DRIVE BELT
- Belt Adjustment
- Drive Belt Replacement
- LUBRICATING THE UTILITY WORK MACHINE
- Lubrication Locations
- PIVOT PINS
- Inspection And Maintenance
- BOB-TACH
- Inspection And Maintenance
- MACHINE STORAGE AND RETURN TO SERVICE
- Storage
- Return To Service
SYSTEM SETUP & ANALYSIS10 topics
- DIAGNOSTIC SERVICE CODES
- Viewing Service Codes
- Service Codes List
- DISPLAY CONTROLLER PANEL SETUP
- Display Selection
- Passwords
- Password Entry (For Starting And Operating The Machine)
- Changing The Operator Password
- Password Lockout Feature
- Job Clock
MACHINE SIGN TRANSLATIONS8 topics
- SERVICE SCHEDULE (7120002)
- MACHINE LOAD CAPACITIES (6814303)
- CARGO BOX SUPPORT (6814308)
- OPERATION INSTRUCTION (6814309)
- LIFT ARM SUPPORT LOCATION (6815099)
- WARNING (7108176) (Remote Hydraulics Only) (Option)
- IMPORTANT (7109316) (Power Take-Off Only) (Option)
- WARNING (7107447) (Power Take-Off Only) (Option)
SPECIFICATIONS11 topics
- TOOLCAT 5600 UTILITY WORK MACHINE SPECIFICATIONS
- Dimensions
- Performance
- Controls
- Engine
- Hydraulic System
- Electrical
- Power Take-Off (PTO) System (Option)
- Drive System
- Capacities
- Tires
Inside this manual
Real pages from this operation & maintenance manual (140 pages). Open the sample pages (PDF, 474 KB)
- Controls and operation, page 34: TRAVEL DIRECTION CONTROL LEVER
- Maintenance, page 82: CAB AIR FILTER
- Specifications, page 132: TOOLCAT 5600 UTILITY WORK MACHINE
- Color page, page 16: 5600 Operation & Maintenance Manual
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the Toolcat 5600 are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
Added to your cart. View cart
This is an operator's manual
Here's how it compares to the other manual types.
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 140 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).